eqlMemberHealthRAIDSetDoubleFaulted
EQLMEMBER-MIB ·
.1.3.6.1.4.1.12740.2.2.1.7
Object
notification
Sent when the raid set has been detected to have double faulted. When this occurs, the array will not come up. User intervention is required to correct the issue
Context
- MIB
- EQLMEMBER-MIB
- OID
.1.3.6.1.4.1.12740.2.2.1.7- Type
- notification
- Status
- current
- Parent
- eqlMemberEnclosureMgmtNotifications
- Siblings
- 24
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eqlMemberHealthTempSensorHighThreshold Sent when a high threshold has been exceeded for any of the
enclosure temp sensors. The implementation of this trap should
not send more than one notification of this type for a… | notification | - | .1.3.6.1.4.1.12740.2.2.1.1 |
| eqlMemberHealthFanTrayRemoved Sent when one of the fan trays have been removed from the
chassis. This results in overheating | notification | - | .1.3.6.1.4.1.12740.2.2.1.10 |
| eqlMemberHealthRAIDSetLostBlkTableFull Sent when the RAID lost block table is full.
This usually is an indication of lost data. | notification | - | .1.3.6.1.4.1.12740.2.2.1.11 |
| eqlMemberHealthBatteryLessThan72Hours Sent when the battery has insufficient charge to survive
a 72 hour power outage. | notification | - | .1.3.6.1.4.1.12740.2.2.1.12 |
| eqlMemberHealthRaidOrphanCache Sent when the RAID driver finds data in the battery-backed cache with no matching disk array. Initialization will not proceed without user intervention. Call EqualLogic Support f… | notification | - | .1.3.6.1.4.1.12740.2.2.1.13 |
| eqlMemberHealthRaidMultipleRaidSets Sent when multiple valid RAIDsets were found. The array cannot choose which one to initialize. Remove all but one valid RAIDset and power-cycle the array. | notification | - | .1.3.6.1.4.1.12740.2.2.1.14 |
| eqlMemberHealthNVRAMBatteryFailed Sent when the NVRAM battery fails . The NVRAM can no longer be used. | notification | - | .1.3.6.1.4.1.12740.2.2.1.15 |
| eqlMemberHealthhwComponentFailedCrit Sent when a critical hardware component has failed. | notification | - | .1.3.6.1.4.1.12740.2.2.1.16 |
| eqlMemberHealthincompatControlModule Sent when An incorrect control module has been inserted into the chassis. | notification | - | .1.3.6.1.4.1.12740.2.2.1.17 |
| eqlMemberHealthlowAmbientTemp Sent when one or more sensors is below its critical temperature range. | notification | - | .1.3.6.1.4.1.12740.2.2.1.18 |
| eqlMemberHealthopsPanelFailure Sent when Ops Panel is missing or broken. | notification | - | .1.3.6.1.4.1.12740.2.2.1.19 |
| eqlMemberHealthTempSensorLowThreshold Sent when a low threshold has been exceeded for any of the
enclosure temp sensors. The implementation of this trap should
not send more than one notification of this type for a … | notification | - | .1.3.6.1.4.1.12740.2.2.1.2 |
| eqlMemberHealthemmLinkFailure Sent when enclosure management services are unavailable. | notification | - | .1.3.6.1.4.1.12740.2.2.1.20 |
| eqlMemberHealthhighBatteryTemperature Sent when the cache battery temperature exceeds upper limit; battery charger is disabled. | notification | - | .1.3.6.1.4.1.12740.2.2.1.21 |
| eqlMemberHealthenclosureOpenPerm Sent when the enclosure is open for a long time. | notification | - | .1.3.6.1.4.1.12740.2.2.1.22 |
| eqlMemberHealthsumoChannelBothMissing Sent when both the Sumo Channel cards go missing. | notification | - | .1.3.6.1.4.1.12740.2.2.1.23 |
| eqlMemberHealthsumoEIPFailureCOndition Sent when EIP failed in Sumo. | notification | - | .1.3.6.1.4.1.12740.2.2.1.24 |
| eqlMemberHealthsumoChannelBothFailed Sent when both the Sumo Channel cards go into failed state. | notification | - | .1.3.6.1.4.1.12740.2.2.1.25 |
| eqlMemberHealthFanSpeedHighThreshold Sent when a high threshold has been exceeded for any of the
enclosure fan speed sensors. The implementation of this trap should
not send more than one notification of this type … | notification | - | .1.3.6.1.4.1.12740.2.2.1.3 |
| eqlMemberHealthFanSpeedLowThreshold Sent when a low threshold has been exceeded for any of the
enclosure fan speed sensors. The implementation of this trap should
not send more than one notification of this type f… | notification | - | .1.3.6.1.4.1.12740.2.2.1.4 |
| eqlMemberHealthPowerSupplyFanFailure Sent when a failure has been detected on any of the power
supply fan speed sensors. The implementation of this trap should
not send more than one notification of this type for… | notification | - | .1.3.6.1.4.1.12740.2.2.1.5 |
| eqlMemberHealthPowerSupplyFailure Sent when a failure has been detected on any of the power
supplys in the PSA. The implementation of this trap should
not send more than one notification of this type for a sen… | notification | - | .1.3.6.1.4.1.12740.2.2.1.6 |
| eqlMemberHealthBothFanTraysRemoved Sent when both of the fan trays have been removed from the
chassis. This results in overheating | notification | - | .1.3.6.1.4.1.12740.2.2.1.8 |
| eqlMemberHealthRAIDlostCache Sent because the RAID driver is unable to recover the
battery-backed cache. The disk array will not initialize
without user intervention. See the Handling Lost Data section
i… | notification | - | .1.3.6.1.4.1.12740.2.2.1.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eqlMemberHealthStatus The value of this object is determinted by the severity of the
health condition state variables. The most severe state will
be reflected. | column | Enumeration | .1.3.6.1.4.1.12740.2.1.5.1.1 |