eqlMemberDriveMirroring
EQLMEMBER-MIB ·
.1.3.6.1.4.1.12740.2.1.1.1.18
Object
column
r/w
Enumeration
On disk drive failures, this value is checked for mirroring the data onto the spare drive. The value can be changed from enabled(0) to disabled(1) and vice-versa
Context
- MIB
- EQLMEMBER-MIB
- OID
.1.3.6.1.4.1.12740.2.1.1.1.18- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- eqlMemberEntry
- Table
- eqlMemberTable
- Siblings
- 23
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | enabled |
1 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eqlMemberIndex This field unique identifies an array within a group. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.2.1.1.1.1 |
| eqlMemberRowStatus This RowStatus is used only to delete a member.
The row in this table could be created only by the subsystem. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.12740.2.1.1.1.10 |
| eqlMemberState The field specifies the desired state of the array.
Currently setting this value to vacate is the only operation that is
supported. | column | Enumeration | .1.3.6.1.4.1.12740.2.1.1.1.11 |
| eqlMemberPolicySingleControllerSafe This field specifies the cache policy if we boot with only one CM. | column | Enumeration | .1.3.6.1.4.1.12740.2.1.1.1.12 |
| eqlMemberPolicyLowBatterySafe This field specifies the cache policy if the battery charge is below tolerance. | column | Enumeration | .1.3.6.1.4.1.12740.2.1.1.1.13 |
| eqlMemberVersion This field specifies the compatibility level of a member. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.2.1.1.1.14 |
| eqlMemberDelayDataMove When a new member is added to the group the value of this column will be zero(unconfigured).
Before configuring raid-policy , this value must be set to wait(1) or use-member-space… | column | Enumeration | .1.3.6.1.4.1.12740.2.1.1.1.15 |
| eqlMemberDefaultInetRouteType This field is used to indicate the default gateway for the group.
This value can be overriden on a per array basis.
This field contains the address of the local router used to for… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.12740.2.1.1.1.16 |
| eqlMemberDefaultInetRoute This field is used to indicate the default gateway for the group.
This value can be overriden on a per array basis.
This field contains the address of the local router used to for… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.12740.2.1.1.1.17 |
| eqlMemberProfileIndex This field represents the profile identifier supported by this member. | column | Unsigned32 | .1.3.6.1.4.1.12740.2.1.1.1.19 |
| eqlMemberDateAndTime This field is dynamic, it contains the date and time for the array.
There is no default value. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.12740.2.1.1.1.2 |
| eqlMemberControllerType This variable specifies the type of the active controller module on this member. Ex: Type II | column | OctetString | .1.3.6.1.4.1.12740.2.1.1.1.20 |
| eqlMemberControllerMajorVersion This variable specifies the major version number of the
software present on the active controller module. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.2.1.1.1.21 |
| eqlMemberControllerMinorVersion This variable specifies the minor version number of the
software present on the active controller module. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.2.1.1.1.22 |
| eqlMemberControllerMaintenanceVersion This variable specifies the maintenance version number of the
software present on the active controller module. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.2.1.1.1.23 |
| eqlMemberCompressionCapable This variable specifies if the member is capable of supporting compression. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.2.1.1.1.24 |
| eqlMemberTimeZone The field specifies the default timezone for the group.
This can be overwritten on a per Array basis. The default is EST.
We need to file in all the supported TZ. For now we punt … | column | Enumeration | .1.3.6.1.4.1.12740.2.1.1.1.3 |
| eqlMemberAdjustDaylightSavTime This field specifies whether or not dayLight savings time should be applied to the time.
The default value is enabled. | column | Enumeration | .1.3.6.1.4.1.12740.2.1.1.1.4 |
| eqlMemberDefaultRoute This field is deprecated and will be unsupported in the next release. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.12740.2.1.1.1.5 |
| eqlMemberSite This field specifies the site where the volume res ides.
Sites are defined on a per array basis.
Sites are used to define where primary and secondary copies of volume mirror resid… | column | OctetString | .1.3.6.1.4.1.12740.2.1.1.1.6 |
| eqlMemberDescription This field contains a description of the array.
For example the location of the array. There is no default. | column | OctetString | .1.3.6.1.4.1.12740.2.1.1.1.7 |
| eqlMemberUUID EQL-SECONDARY-KEY
This field is for internal use only. | column | OctetString | .1.3.6.1.4.1.12740.2.1.1.1.8 |
| eqlMemberName This field specifies the name of the array.
This name must be unique within the group.
It can be a DNS name, though it is not required to be one. There is no default. | column | OctetString | .1.3.6.1.4.1.12740.2.1.1.1.9 |