eqlMemberDefaultInetRoute
EQLMEMBER-MIB ·
.1.3.6.1.4.1.12740.2.1.1.1.17
Object
This field is used to indicate the default gateway for the group. This value can be overriden on a per array basis. This field contains the address of the local router used to forward network traffic beyond the local subnet. Gateways are used to connect multiple subnets. There is no default value for this entry.
Context
- MIB
- EQLMEMBER-MIB
- OID
.1.3.6.1.4.1.12740.2.1.1.1.17- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- eqlMemberEntry
- Table
- eqlMemberTable
- Siblings
- 23
Syntax
INET-ADDRESS-MIBInetAddress
- Source
- INET-ADDRESS-MIBInetAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eqlMemberIndex This field unique identifies an array within a group. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.2.1.1.1.1 |
| eqlMemberRowStatus This RowStatus is used only to delete a member.
The row in this table could be created only by the subsystem. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.12740.2.1.1.1.10 |
| eqlMemberState The field specifies the desired state of the array.
Currently setting this value to vacate is the only operation that is
supported. | column | Enumeration | .1.3.6.1.4.1.12740.2.1.1.1.11 |
| eqlMemberPolicySingleControllerSafe This field specifies the cache policy if we boot with only one CM. | column | Enumeration | .1.3.6.1.4.1.12740.2.1.1.1.12 |
| eqlMemberPolicyLowBatterySafe This field specifies the cache policy if the battery charge is below tolerance. | column | Enumeration | .1.3.6.1.4.1.12740.2.1.1.1.13 |
| eqlMemberVersion This field specifies the compatibility level of a member. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.2.1.1.1.14 |
| eqlMemberDelayDataMove When a new member is added to the group the value of this column will be zero(unconfigured).
Before configuring raid-policy , this value must be set to wait(1) or use-member-space… | column | Enumeration | .1.3.6.1.4.1.12740.2.1.1.1.15 |
| eqlMemberDefaultInetRouteType This field is used to indicate the default gateway for the group.
This value can be overriden on a per array basis.
This field contains the address of the local router used to for… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.12740.2.1.1.1.16 |
| eqlMemberDriveMirroring On disk drive failures, this value is checked for mirroring the data onto the spare drive.
The value can be changed from enabled(0) to disabled(1) and vice-versa | column | Enumeration | .1.3.6.1.4.1.12740.2.1.1.1.18 |
| eqlMemberProfileIndex This field represents the profile identifier supported by this member. | column | Unsigned32 | .1.3.6.1.4.1.12740.2.1.1.1.19 |
| eqlMemberDateAndTime This field is dynamic, it contains the date and time for the array.
There is no default value. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.12740.2.1.1.1.2 |
| eqlMemberControllerType This variable specifies the type of the active controller module on this member. Ex: Type II | column | OctetString | .1.3.6.1.4.1.12740.2.1.1.1.20 |
| eqlMemberControllerMajorVersion This variable specifies the major version number of the
software present on the active controller module. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.2.1.1.1.21 |
| eqlMemberControllerMinorVersion This variable specifies the minor version number of the
software present on the active controller module. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.2.1.1.1.22 |
| eqlMemberControllerMaintenanceVersion This variable specifies the maintenance version number of the
software present on the active controller module. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.2.1.1.1.23 |
| eqlMemberCompressionCapable This variable specifies if the member is capable of supporting compression. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.2.1.1.1.24 |
| eqlMemberTimeZone The field specifies the default timezone for the group.
This can be overwritten on a per Array basis. The default is EST.
We need to file in all the supported TZ. For now we punt … | column | Enumeration | .1.3.6.1.4.1.12740.2.1.1.1.3 |
| eqlMemberAdjustDaylightSavTime This field specifies whether or not dayLight savings time should be applied to the time.
The default value is enabled. | column | Enumeration | .1.3.6.1.4.1.12740.2.1.1.1.4 |
| eqlMemberDefaultRoute This field is deprecated and will be unsupported in the next release. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.12740.2.1.1.1.5 |
| eqlMemberSite This field specifies the site where the volume res ides.
Sites are defined on a per array basis.
Sites are used to define where primary and secondary copies of volume mirror resid… | column | OctetString | .1.3.6.1.4.1.12740.2.1.1.1.6 |
| eqlMemberDescription This field contains a description of the array.
For example the location of the array. There is no default. | column | OctetString | .1.3.6.1.4.1.12740.2.1.1.1.7 |
| eqlMemberUUID EQL-SECONDARY-KEY
This field is for internal use only. | column | OctetString | .1.3.6.1.4.1.12740.2.1.1.1.8 |
| eqlMemberName This field specifies the name of the array.
This name must be unique within the group.
It can be a DNS name, though it is not required to be one. There is no default. | column | OctetString | .1.3.6.1.4.1.12740.2.1.1.1.9 |