eltexIsisSysCalcThrshUpdStart
ELTEX-ISIS-MIB ·
.1.3.6.1.4.1.35265.55.1.1.1.1.10
Object
column
r/w
Unsigned32
This parameter can be used to override the routing
calculation delay indicated by the eltexIsisSysCalcMaxDelay
parameter when the number of updates to the Link State
Database reaches a threshold value.
This parameter specifies the threshold number of updates
that can be made to the Link State Database such that any
subsequent update to the database causes a full routing
calculation to start immediately.
- 0 indicates that a routing calculation will immediately
follow an update to the database.
- 0xFFFFFFFF indicates that this threshold is infinite, and
hence the timing of a routing calculation is determined
solely by the configured calculation delay.
Context
- MIB
- ELTEX-ISIS-MIB
- OID
.1.3.6.1.4.1.35265.55.1.1.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- eltexIsisSysEntry
- Table
- eltexIsisSysTable
- Siblings
- 12
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eltexIsisSysInstance The unique identifier of the Integrated IS-IS
instance to which this row corresponds.
This object follows the index behavior. | column | Integer32 | .1.3.6.1.4.1.35265.55.1.1.1.1.1 |
| eltexIsisSysCalcThrshUpdRestart This parameter can be used to interrupt a full routing
calculation when the number of pending updates to the Link
State Database has reached a threshold value.
This… | column | Unsigned32 | .1.3.6.1.4.1.35265.55.1.1.1.1.11 |
| eltexIsisSysCalcThrshRestartLimit This parameter limits the number of consecutive times a
routing calculation can be interrupted by new updates.
This guarantees that the routing calculation will actually
complete.… | column | Unsigned32 | .1.3.6.1.4.1.35265.55.1.1.1.1.12 |
| eltexIsisSysHostNameDynamic Enable translation from System ID to hostname.
Advertise hostname to other Intermediate Systems in the
Dynamic Hostname TLV. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.35265.55.1.1.1.1.13 |
| eltexIsisSysType At which levels is the Intermediate System
running? This object follows the
replaceOnlyWhileDisabled behavior. | column | Enumeration | .1.3.6.1.4.1.35265.55.1.1.1.1.2 |
| eltexIsisSysID The ID for this instance of the Integrated IS-IS
protocol. | column | EltexIsisSystemID | .1.3.6.1.4.1.35265.55.1.1.1.1.3 |
| eltexIsisSysAdminState The administrative state of this instance of the
Integrated IS-IS protocol. Setting this object to the
value 'on' when its current value is 'off' enables operation
of this instan… | column | EltexIsisAdminState | .1.3.6.1.4.1.35265.55.1.1.1.1.4 |
| eltexIsisSysOperState The current operational status of this IS-IS instance. | column | EltexIsisOperStatus | .1.3.6.1.4.1.35265.55.1.1.1.1.5 |
| eltexIsisSysRowStatus The state of the IS-IS router. Turning this to
state 'destroy' forces the router to forget all
the current configuration. Setting the state to
'notInService' stops protocol proc… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.35265.55.1.1.1.1.6 |
| eltexIsisSysMaxAge Value to place in RemainingLifeTime field of
the LSPs we generate.
This should be at least 300 seconds greater than
eltexIsisSysMaxLSPGenInt. | column | Unsigned32 | .1.3.6.1.4.1.35265.55.1.1.1.1.7 |
| eltexIsisSysMaxLSPGenInt Maximum interval, in seconds, between generated LSPs
by this instance of the protocol. This object follows
the resettingTimer behavior. The value must be
greater than any value c… | column | Unsigned32 | .1.3.6.1.4.1.35265.55.1.1.1.1.8 |
| eltexIsisSysCalcMaxDelay The maximum delay before the Routing Table is
recalculated following a change to the Link State
Database. (Recalculation is delayed to reduce the
frequency of recalculations of t… | column | Unsigned32 | .1.3.6.1.4.1.35265.55.1.1.1.1.9 |