rlOspfRtrLnkLinkID
EDGECORE-IpRouter ·
.1.3.6.1.4.1.259.10.1.14.89.26.14.4.1.13
Object
column
RFC1155-SMIIpAddress
Identifies the object that this router link connects to. Value depends on the link's Type.
Context
- MIB
- EDGECORE-IpRouter
- OID
.1.3.6.1.4.1.259.10.1.14.89.26.14.4.1.13- Type
- column
- Access
- readonly
- Status
- current
- Parent
- rlOspfRtrLnkEntry
- Table
- rlOspfRtrLnkTable
- Siblings
- 15
Syntax
RFC1155-SMIIpAddress
- Source
- RFC1155-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rlOspfRtrLnkAreaId The 32 bit identifier of the Area from which
the LSA was received. | column | OSPF-MIBAreaID | .1.3.6.1.4.1.259.10.1.14.89.26.14.4.1.1 |
| rlOspfRtrLnkBitE When set, the router is an AS
boundary router (E is for external). | column | Enumeration | .1.3.6.1.4.1.259.10.1.14.89.26.14.4.1.10 |
| rlOspfRtrLnkBitB When set, the router is an area
border router (B is for border). | column | Enumeration | .1.3.6.1.4.1.259.10.1.14.89.26.14.4.1.11 |
| rlOspfRtrLnkLinks The number of router links described in this LSA.
This must be the total collection of router links
(i.e., interfaces) to the area. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.259.10.1.14.89.26.14.4.1.12 |
| rlOspfRtrLnkLinkData Value depends on the link's Type field. | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.259.10.1.14.89.26.14.4.1.14 |
| rlOspfRtrLnkType A quick description of the router link. | column | Enumeration | .1.3.6.1.4.1.259.10.1.14.89.26.14.4.1.15 |
| rlOspfRtrLnkMetric The cost of using this router link. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.259.10.1.14.89.26.14.4.1.16 |
| rlOspfRtrLnkLsid The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the adver… | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.259.10.1.14.89.26.14.4.1.2 |
| rlOspfRtrLnkRouterId The 32 bit number that uniquely identifies the
originating router in the Autonomous System. | column | OSPF-MIBRouterID | .1.3.6.1.4.1.259.10.1.14.89.26.14.4.1.3 |
| rlOspfRtrLnkIdx The index is a unsigned 32-bit integer.
It is used as sequence number of entry
in the LSA and relevant only for Router
or Network LSA which can contain
unlimited number of entries. | column | Unsigned32 | .1.3.6.1.4.1.259.10.1.14.89.26.14.4.1.4 |
| rlOspfRtrLnkSequence The sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of sequence
numbers is linearly ordered. The lar… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.259.10.1.14.89.26.14.4.1.5 |
| rlOspfRtrLnkAge This field is the age of the link state
advertisement in seconds. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.259.10.1.14.89.26.14.4.1.6 |
| rlOspfRtrLnkChecksum This field is the checksum of the complete contents
of the advertisement, excepting the age field.
The age field is excepted so that an advertisement's
age can be incremented with… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.259.10.1.14.89.26.14.4.1.7 |
| rlOspfRtrLnkLength The lenth in bytes of the LSA.
This includes the 20 byte LSA header. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.259.10.1.14.89.26.14.4.1.8 |
| rlOspfRtrLnkBitV When set, the router is an endpoint
of one or more fully adjacent virtual
links having the described area as Transit
area (V is for virtual link endpoint). | column | Enumeration | .1.3.6.1.4.1.259.10.1.14.89.26.14.4.1.9 |