rlDhcpSrvDbLocation

EDGECORE-DHCP-MIB · .1.3.6.1.4.1.259.10.1.14.89.38.32
MIB view Table view

Object

scalar obsolete Enumeration 
Describes where DHCP Server database is stored.

Context

MIB
EDGECORE-DHCP-MIB
OID
.1.3.6.1.4.1.259.10.1.14.89.38.32
Type
scalar
Access
readonly
Status
obsolete
Parent
rsDHCP
Siblings
23

Syntax

Enumeration

Values & Constraints

Enumerated Values
1nvram
2flash

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rsDhcpMibVersion
DHCP MIB's version, the current version is 4.
scalarInteger32.1.3.6.1.4.1.259.10.1.14.89.38.14
rlDhcpRelayEnable
Enable or disable the use of the DHCP relay.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.259.10.1.14.89.38.25
rlDhcpRelayExists
This variable shows whether the device can function as a DHCP Relay Agent.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.259.10.1.14.89.38.26
rlDhcpRelayNextServerTable
The DHCP Relay Next Servers configuration Table
table-.1.3.6.1.4.1.259.10.1.14.89.38.27
rlDhcpRelayInterfaceTable
The enabled DHCP Relay Interface Table
table-.1.3.6.1.4.1.259.10.1.14.89.38.28
rlDhcpRelayInterfaceListTable
This table contains one entry. The entry contains port list and vlan lists of interfaces that have configured DHCP relay
table-.1.3.6.1.4.1.259.10.1.14.89.38.29
rlDhcpSrvEnable
Enable or Disable the use of the DHCP Server. For a router product the default value is TRUE. For a switch product the default is FALSE.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.259.10.1.14.89.38.30
rlDhcpSrvExists
This variable shows whether the device can function as a DHCP Server.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.259.10.1.14.89.38.31
rlDhcpSrvMaxNumOfClients
This variable shows maximum number of clients that can be supported by DHCP Server dynamic allocation.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.259.10.1.14.89.38.33
rlDhcpSrvDbNumOfActiveEntries
This variable shows number of active (valid) entries stored in database.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.259.10.1.14.89.38.34
rlDhcpSrvDbErase obsolete
The value is always false. Setting this variable to true causes erasing all entries in DHCP database.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.259.10.1.14.89.38.35
rlDhcpSrvProbeEnable
Enable or Disable the use of the DHCP probe before allocating an IP address.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.259.10.1.14.89.38.36
rlDhcpSrvProbeTimeout
Indicates the peiod of time in milliseconds the DHCP probe will wait before issuing a new trial or deciding that no other device on the network has the IP address which DHCP consi…
scalarUnsigned32.1.3.6.1.4.1.259.10.1.14.89.38.37
rlDhcpSrvProbeRetries
Indicates how many times DHCP will probe before deciding that no other device on the network has the IP address which DHCP considers allocating.
scalarUnsigned32.1.3.6.1.4.1.259.10.1.14.89.38.38
rlDhcpSrvDefaultNetworkPoolName
Contains a default network pool name. Used in case of one network pool only.
scalarOctetString.1.3.6.1.4.1.259.10.1.14.89.38.39
rlDhcpSrvIpAddrTable
Table of IP Addresses allocated by DHCP Server by static and dynamic allocations.
table-.1.3.6.1.4.1.259.10.1.14.89.38.45
rlDhcpSrvDynamicTable
The DHCP Dynamic Server's configuration Table
table-.1.3.6.1.4.1.259.10.1.14.89.38.46
rlDhcpSrvConfParamsTable
The DHCP Configuration Parameters Table
table-.1.3.6.1.4.1.259.10.1.14.89.38.47
rlDhcpSrvNumOfNetworkPools
This variable shows number of network pools (not excluded).
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.259.10.1.14.89.38.48
rlDhcpSrvNumOfExcludedPools
This variable shows number of excluded pools.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.259.10.1.14.89.38.49
rlDhcpSrvNumOfHostPools
This variable shows number of static entries stored in database.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.259.10.1.14.89.38.50
rlDhcpSrvNumOfDynamicEntries
This variable shows number of dynamic and automatic (not static) entries stored in database.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.259.10.1.14.89.38.51
rlDhcpSrvNumOfUsedEntries
This variable shows number of entries (any type) stored in database.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.259.10.1.14.89.38.52