snrMgnMode
E5-121-MIB ·
.1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.1
Object
column
r/w
Enumeration
Configure DSL SNR margin configuration mode of the specified ports. Profile: the SNR margin configuration comes from DSL profile. Line: the SNR margin configuration comes from line configuration.
Context
- MIB
- E5-121-MIB
- OID
.1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- snrMgnEntry
- Table
- snrMgnTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | profile |
1 | line |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| snrMgnUrDownshift Configured Signal/Noise Margin for rate downshift.
If the noise margin falls below this level, the modem
should attempt to decrease its transmit rate.
In the case that RADSL mode … | column | tenth dB Integer32 | .1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.10 |
| snrMgnUrUpshift Configured Signal/Noise Margin for rate upshift.
If the noise margin rises above this level, the modem
should attempt to increase its transmit rate.
In the case that RADSL is not … | column | tenth dB Integer32 | .1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.11 |
| snrMgnUcTarget Configured Target Signal/Noise Margin.
This is the Noise Margin the modem must achieve
with a BER of 10-7 or better to successfully complete
initialization. | column | tenth dB Integer32 | .1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.2 |
| snrMgnUcMax Configured Maximum acceptable Signal/Noise Margin.
If the Noise Margin is above this the modem should
attempt to reduce its power output to optimize its
operation. | column | tenth dB Integer32 | .1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.3 |
| snrMgnUcMin Configured Minimum acceptable Signal/Noise Margin.
If the noise margin falls below this level, the modem
should attempt to increase its power output. If that
is not possible the … | column | tenth dB Integer32 | .1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.4 |
| snrMgnUcDownshift Configured Signal/Noise Margin for rate downshift.
If the noise margin falls below this level, the modem
should attempt to decrease its transmit rate. In
the case that RADSL mode… | column | tenth dB Integer32 | .1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.5 |
| snrMgnUcUpshift Configured Signal/Noise Margin for rate upshift.
If the noise margin rises above this level, the modem
should attempt to increase its transmit rate. In
the case that RADSL is n… | column | tenth dB Integer32 | .1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.6 |
| snrMgnUrTarget Configured Target Signal/Noise Margin.
This is the Noise Margin the modem must achieve
with a BER of 10-7 or better to successfully complete
initialization. | column | tenth dB Integer32 | .1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.7 |
| snrMgnUrMax Configured Maximum acceptable Signal/Noise Margin.
If the Noise Margin is above this the modem should
attempt to reduce its power output to optimize its
operation. | column | tenth dB Integer32 | .1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.8 |
| snrMgnUrMin Configured Minimum acceptable Signal/Noise Margin.
If the noise margin falls below this level, the modem
should attempt to increase its power output. If that
is not possible the … | column | tenth dB Integer32 | .1.3.6.1.4.1.6321.1.2.3.4.8.15.1.1.9 |