iesMaintenanceDSLConfProfileName
E5-110-IESCOMMON-MIB ·
.1.3.6.1.4.1.6321.1.2.3.1.98.3.2.5
Object
scalar
r/w
OctetString
The DSL profile name
Context
- MIB
- E5-110-IESCOMMON-MIB
- OID
.1.3.6.1.4.1.6321.1.2.3.1.98.3.2.5- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- iesSysMaintenance
- Siblings
- 16
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| iesMaintenanceOps The managed object is for system maintenance. When the EMS
wants to trigger the system maitenance operation, the EMS
shall send SNMP-SET message to set the corresponding bit value… | scalar | Integer32 | .1.3.6.1.4.1.6321.1.2.3.1.98.3.2.1 |
| iesMaintenanceDSLConfMacCount The configuration defines the number of mac addresses which can pass through the port. | scalar | Integer32 | .1.3.6.1.4.1.6321.1.2.3.1.98.3.2.10 |
| iesMaintenanceVpi VPI of the channel | scalar | Integer32 | .1.3.6.1.4.1.6321.1.2.3.1.98.3.2.11 |
| iesMaintenanceVci VCI of the channel | scalar | Integer32 | .1.3.6.1.4.1.6321.1.2.3.1.98.3.2.12 |
| iesMaintenanceDSLConfAlarmProfileName The DSL alarm profile name | scalar | OctetString | .1.3.6.1.4.1.6321.1.2.3.1.98.3.2.13 |
| iesMaintenanceDSLConfAnnexL The annex L setting of the ADSL line (Only in AnnexA). | scalar | Enumeration | .1.3.6.1.4.1.6321.1.2.3.1.98.3.2.14 |
| iesMaintenanceDSLConfPmMode The power management mode of the ADSL line. | scalar | Enumeration | .1.3.6.1.4.1.6321.1.2.3.1.98.3.2.15 |
| iesMaintenanceDSLConfRateMode Defines what form of transmit rate adaptation is
configured on this modem. See ADSL Forum TR-005 [3]
for more information. | scalar | Enumeration | .1.3.6.1.4.1.6321.1.2.3.1.98.3.2.16 |
| iesMaintenanceDSLConfIgmpFilter The IGMP filter name. | scalar | OctetString | .1.3.6.1.4.1.6321.1.2.3.1.98.3.2.17 |
| iesMaintenanceTarget The managed object is used for identify the target on which
the maintenance operation should be performed. | scalar | Integer32 | .1.3.6.1.4.1.6321.1.2.3.1.98.3.2.2 |
| iesMaintenanceDSLConfOps The managed object is for xDSL line configuration. When the EMS
wants to issue the desired operation, the EMS
shall send SNMP-SET message to set the corresponding bit value
to be … | scalar | Integer32 | .1.3.6.1.4.1.6321.1.2.3.1.98.3.2.3 |
| iesMaintenanceDSLConfTarget The managed object is used for identify the target on which
the line configuration should be performed. The target is encoded
as:
Byte 1: the octet specifies a set of eight Chassi… | scalar | OctetString | .1.3.6.1.4.1.6321.1.2.3.1.98.3.2.4 |
| iesMaintenanceDSLConfMode The DSL mode. The semantic for each bit is:
Bit 1: ADSL, G.lite
Bit 2: ADSL, G.dmt
Bit 3: ADSL, T1.413
Bit 4: ADSL, Auto
Bit 5: ADSL, ETSI
Bit 6: ADSL2,
Bit 7: ADSL2+ | scalar | Integer32 | .1.3.6.1.4.1.6321.1.2.3.1.98.3.2.6 |
| iesMaintenanceDSLConfPktFilter The packet filter. The semantic for each bit is:
Bit 1: accept all
Bit 2: accept PPPoE only
Bit 3: reject ARP
Bit 4: reject DHCP
Bit 5: reject EAPOL
Bit 6: reject PPPoE
Bit 7: rej… | scalar | Integer32 | .1.3.6.1.4.1.6321.1.2.3.1.98.3.2.7 |
| iesMaintenanceDSLConfDot1xControl The configuration defines the 802.1x control type. | scalar | Enumeration | .1.3.6.1.4.1.6321.1.2.3.1.98.3.2.8 |
| iesMaintenanceDSLConfDot1xReauthPeriod The configuration defines the 802.1x re-authentication period (seconds). | scalar | Integer32 | .1.3.6.1.4.1.6321.1.2.3.1.98.3.2.9 |