iesMaintenanceDSLConfOps

Object

scalar r/w Integer32

The managed object is for xDSL line configuration. When the EMS
wants to issue the desired operation, the EMS
shall send SNMP-SET message to set the corresponding bit value
to be 1. The various bit positions are:
BIT  1: enable port
BIT  2: disable port
BIT  3: set DSL mode
BIT  4: set profile
BIT  5: enable mac filter
BIT  6: disable mac filter
BIT  7: set packet filter
BIT  8: enable dot1x
BIT  9: disable dot1x
BIT 10: set dot1x control
BIT 11: enable dot1x re-authentication
BIT 12: disable dot1x re-authentication
BIT 13: set dot1x re-authentication period
BIT 14: enable mac count filter
BIT 15: disable mac count filter
BIT 16: set mac count filter
BIT 17: set alarm profile
BIT 18: set Annex L (Only in AnnexA)
BIT 19: set power management
BIT 20: set rate adaptation mode
BIT 21: set IGMP filter (Not support after E5-111 v3.0)
BIT 22: enable Annex M
BIT 23: disable Annex M

Context

MIB: E5-110-IESCOMMON-MIB
OID: .1.3.6.1.4.1.6321.1.2.3.1.98.3.2.3
Type: scalar
Access: readwrite
Status: current
Parent: iesSysMaintenance
Siblings: 16

Related Objects

Sibling Objects

Object	Type	Syntax	OID
iesMaintenanceOps The managed object is for system maintenance. When the EMS wants to trigger the system maitenance operation, the EMS shall send SNMP-SET message to set the corresponding bit value…	scalar	Integer32	`.1.3.6.1.4.1.6321.1.2.3.1.98.3.2.1`
iesMaintenanceDSLConfMacCount The configuration defines the number of mac addresses which can pass through the port.	scalar	Integer32	`.1.3.6.1.4.1.6321.1.2.3.1.98.3.2.10`
iesMaintenanceVpi VPI of the channel	scalar	Integer32	`.1.3.6.1.4.1.6321.1.2.3.1.98.3.2.11`
iesMaintenanceVci VCI of the channel	scalar	Integer32	`.1.3.6.1.4.1.6321.1.2.3.1.98.3.2.12`
iesMaintenanceDSLConfAlarmProfileName The DSL alarm profile name	scalar	OctetString	`.1.3.6.1.4.1.6321.1.2.3.1.98.3.2.13`
iesMaintenanceDSLConfAnnexL The annex L setting of the ADSL line (Only in AnnexA).	scalar	Enumeration	`.1.3.6.1.4.1.6321.1.2.3.1.98.3.2.14`
iesMaintenanceDSLConfPmMode The power management mode of the ADSL line.	scalar	Enumeration	`.1.3.6.1.4.1.6321.1.2.3.1.98.3.2.15`
iesMaintenanceDSLConfRateMode Defines what form of transmit rate adaptation is configured on this modem. See ADSL Forum TR-005 [3] for more information.	scalar	Enumeration	`.1.3.6.1.4.1.6321.1.2.3.1.98.3.2.16`
iesMaintenanceDSLConfIgmpFilter The IGMP filter name.	scalar	OctetString	`.1.3.6.1.4.1.6321.1.2.3.1.98.3.2.17`
iesMaintenanceTarget The managed object is used for identify the target on which the maintenance operation should be performed.	scalar	Integer32	`.1.3.6.1.4.1.6321.1.2.3.1.98.3.2.2`
iesMaintenanceDSLConfTarget The managed object is used for identify the target on which the line configuration should be performed. The target is encoded as: Byte 1: the octet specifies a set of eight Chassi…	scalar	OctetString	`.1.3.6.1.4.1.6321.1.2.3.1.98.3.2.4`
iesMaintenanceDSLConfProfileName The DSL profile name	scalar	OctetString	`.1.3.6.1.4.1.6321.1.2.3.1.98.3.2.5`
iesMaintenanceDSLConfMode The DSL mode. The semantic for each bit is: Bit 1: ADSL, G.lite Bit 2: ADSL, G.dmt Bit 3: ADSL, T1.413 Bit 4: ADSL, Auto Bit 5: ADSL, ETSI Bit 6: ADSL2, Bit 7: ADSL2+	scalar	Integer32	`.1.3.6.1.4.1.6321.1.2.3.1.98.3.2.6`
iesMaintenanceDSLConfPktFilter The packet filter. The semantic for each bit is: Bit 1: accept all Bit 2: accept PPPoE only Bit 3: reject ARP Bit 4: reject DHCP Bit 5: reject EAPOL Bit 6: reject PPPoE Bit 7: rej…	scalar	Integer32	`.1.3.6.1.4.1.6321.1.2.3.1.98.3.2.7`
iesMaintenanceDSLConfDot1xControl The configuration defines the 802.1x control type.	scalar	Enumeration	`.1.3.6.1.4.1.6321.1.2.3.1.98.3.2.8`
iesMaintenanceDSLConfDot1xReauthPeriod The configuration defines the 802.1x re-authentication period (seconds).	scalar	Integer32	`.1.3.6.1.4.1.6321.1.2.3.1.98.3.2.9`

Object

Context

Syntax

Values & Constraints

Related Objects