ret-air-hi-sp

DataAire-dap4-al-MIB · .1.3.6.1.4.1.9839.2.1.3.24
MIB view Table view

Object

scalar r/w N/A Integer32 
Upper limit alarm of return air temp

Context

MIB
DataAire-dap4-al-MIB
OID
.1.3.6.1.4.1.9839.2.1.3.24
Type
scalar
Access
readwrite
Status
current
Units
N/A
Parent
integerObjects
Siblings
96

Syntax

N/A Integer32

Values & Constraints

Object Constraints
range: -32768-32767

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
disch-air-lo-sp
Lower Limit alarm of discharge air temp
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.1
c1-hours-h
Compressor 1 Runtime -This point applies to DX unit with one compressor -high
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.10
c1-hours-l
Compressor 1 Runtime -This point applies to DX unit with one compressor -low
scalarhour Integer32.1.3.6.1.4.1.9839.2.1.3.11
c2-hours-h
Compressor 2 Runtime -This point applies to DX unit with dual compressor - high
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.12
c2-hours-l
Compressor 2 Runtime -This point applies to DX unit with dual compressor - low
scalarhour Integer32.1.3.6.1.4.1.9839.2.1.3.13
ht1-hours-h
Heater 1 Runtime - high
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.14
ht1-hours-l
Heater 1 Runtime - low
scalarhour Integer32.1.3.6.1.4.1.9839.2.1.3.15
current-second
Current second
scalarsec Integer32.1.3.6.1.4.1.9839.2.1.3.16
current-minute
Current minute
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.17
current-hour
Current hour
scalarhour Integer32.1.3.6.1.4.1.9839.2.1.3.18
current-day
Current day
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.19
humidity-dis
Relative humidity displayed as xx%
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.2
current-month
Current month
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.20
current-year
Current year
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.21
firestat-sp
Alarm settting of return air temp to determine there is a fire
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.22
hum-hi-sp
Humidity upper limit alarm
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.23
hum-lo-sp
Humidity lower limit alarm
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.25
ret-air-lo-sp
Lower limit alarm of return air temp
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.26
hum-deadband
amount hum must change from setpoint before acting
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.27
hum-setpoint
humidity setpoint
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.28
start-dly
Time before the system starts up
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.29
stages-on
Cooling Stages On, DX only
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.3
alm1-del
Optional Alarm 1 Delay
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.30
alm2-del
Optional Alarm 2 Delay
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.31
alm3-del
Optional Alarm 3 Delay
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.32
alarm1-txt
Message on optional alarm screen, some also add function
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.33
alarm2-txt
Message on optional alarm screen, some also add function
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.34
alarm3-txt
Message on optional alarm screen, some also add function
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.35
alarm4-txt
Message on optional alarm screen, some also add function
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.36
comp-sel
Comps 0=none, 1=one, 2=one+UL, 3=two, 4=two+UL, 5=Four/two circuit
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.37
dehum-mode
0=none, 1= comp limited, 2=twocomp limited, 3= comp unlimited, 4=twocomp unlimited
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.38
reheat-sel
Number of heat stages
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.39
heaters-on
Number of heat stages running
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.4
hum-sel
0=none, 1=comp mod, 2=comp non, 3= comf mod, 4= conf non mod
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.40
alm-contact-msg
Text displayed on all alarm screens
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.41
powerup-sel
0= start wo/alarm, 1= start w/alarm, 2= requires reset of alarm
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.42
buzzer-select
0=None, 1=short beeps, 2=long beep, 3=Constant
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.43
cw-disp
% of 10volts of analog output #1
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.44
wtrvlv-duty
Chilled Water Utilization Over Last Hour - This applies to Chilled water or Energy saver units.
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.45
hum-hours-h
Humidifier Runtime - high
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.46
hum-hours-l
Humidifier Runtime - low
scalarhour Integer32.1.3.6.1.4.1.9839.2.1.3.47
blower-hours-h
Blower Runtime - high
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.48
blower-hours-l
Blower Runtime - low
scalarhour Integer32.1.3.6.1.4.1.9839.2.1.3.49
minmax-24hr-hum-maximum
Maximum humidity in last 24hrs
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.5
alm4-del
Optional Alarm 4 Delay
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.50
assist-sel
0= no comp assist, 1=one comp assist, 2= two comp assist, 3... 4...
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.51
wtrvlv-sel
Water valve type 0=none, 1=chill, 2=Engy, 3=Aux chill, 4=Disc Reg
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.52
wtrvlv-volts-sel
Water valve voltage 0= 0-10, 1=2-10, 2=7-10, 3=6-9, 4=4-7
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.53
hum-volts
% of 10volts of analog output #2
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.54
dehum-hours-h
Dehumidifier Runtime - High
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.55
dehum-hours-l
Dehumidifier Runtime - Low
scalarhour Integer32.1.3.6.1.4.1.9839.2.1.3.56
autoflush-dly
Time between drain cycles 0=12hr, 1=24hr, 2=48hr, 3=96hr, 4=None
scalarhour Integer32.1.3.6.1.4.1.9839.2.1.3.58
y4-out
Value sent to optional analog output#1
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.59
minmax-24hr-hum-minumum
Minimum humidity in last 24hrs
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.6
y5-out
Value sent to optional analog output#2
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.60
air-flow
Current Fan Airflow - Based on calculated Pressure Diff formula
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.61
opt-snsr1-name
Name of the sensor
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.62
opt-sns-1-ain-type
Analog Sensor 1 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170}
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.63
opt-snsr2-name
Name of the sensor
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.64
opt-sns-2-ain-type
Analog Sensor 2 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170}
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.65
opt-snsr3-name
Name of the sensor
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.66
opt-sns-3-ain-type
Analog Sensor 3 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170}
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.67
opt-snsr4-name
Name of the sensor
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.68
opt-sns-4-ain-type
Analog Sensor 4 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170}
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.69
comp-duty
Cooling Utilization Over Last Hour -Percentage of cooling is used in the last hour of operation; this point applies to DX unit.
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.7
cw-fan-speed-bms
CW Fan speed (%) sent via BMS
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.70
dx-fan-speed-bms
DX Fan speed (%) sent via BMS
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.71
fan-speed-max
Maximum Fan speed (% of output) modulation.
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.72
fan-speed-min
Minimum Fan speed (% of output) modulation from pressure.
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.73
fan-pr-sp
Fan pressure setpoint (0.01 inches of water)
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.74
fan-pr-band
Fan pressure band (0.01 inches of water)
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.75
fan-af-max
Maximum air flow limit of setpoint from BMS or valve modulation.
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.76
fan-af-min
Minimum air flow limit of setpoint from BMS or valve modulation.
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.77
fan-kfactor
Fan K Factor
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.78
num-fans
Number of fans installed in this unit
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.79
heat-duty
Heating Utilization Over Last Hour -Percentage of heating is used in the last hour of operation
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.8
ht2-hours-h
Heater 2 Runtime - high
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.81
ht2-hours-l
Heater 2 Runtime - low
scalarhour Integer32.1.3.6.1.4.1.9839.2.1.3.82
ht3-hours-h
Heater 3 Runtime - high
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.83
ht3-hours-l
Heater 3 Runtime - low
scalarhour Integer32.1.3.6.1.4.1.9839.2.1.3.84
engy-hours-h
Energy Saver Runtime - This optional point applies to energy saver units only -high
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.85
engy-hours-l
Energy Saver Runtime - This optional point applies to energy saver units only - low
scalarhour Integer32.1.3.6.1.4.1.9839.2.1.3.86
cw-hours-h
Chilled Water Runtime - This applies to chilled water units only - high
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.87
cw-hours-l
Chilled Water Runtime - This applies to chilled water units only - low
scalarhour Integer32.1.3.6.1.4.1.9839.2.1.3.88
c3-hours-h
Compressor 3 Runtime - This applies when unit has four stages tandem compressors - high
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.89
hum-duty
Humidifier Utilization Over Last Hour -Percentage of humidifier is used in the last hour of operation
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.9
c3-hours-l
Compressor 3 Runtime - This applies when unit has four stages tandem compressors - low
scalarhour Integer32.1.3.6.1.4.1.9839.2.1.3.90
c4-hours-l
Compressor 4 Runtime - This applies when unit has four stages tandem compressors. - high
scalarhour Integer32.1.3.6.1.4.1.9839.2.1.3.91
c4-hours-h
Compressor 4 Runtime - This applies when unit has four stages tandem compressors. - low
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.92
cond-hours-h
Condenser Runtime - high
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.93
cond-hours-l
Condenser Runtime - low
scalarhour Integer32.1.3.6.1.4.1.9839.2.1.3.94
dx-fan-speed
Fan speed (% of output) when compressor cooling.
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.95
cw-fan-speed
Fan speed (% of output) when cold water cooling.
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.96
fan-af-dx-sp
Fan air flow setpoint for DX unit (cfm)
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.97
fan-af-cw-sp
Fan air flow setpoint for CW unit (cfm)
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.98
zm-airflow-sp
Zone Airflow Setpoint kcfm
scalarN/A Integer32.1.3.6.1.4.1.9839.2.1.3.99