c1-hours-h
DataAire-dap4-al-MIB ·
.1.3.6.1.4.1.9839.2.1.3.10
Object
scalar
N/A Integer32
Compressor 1 Runtime -This point applies to DX unit with one compressor -high
Context
- MIB
- DataAire-dap4-al-MIB
- OID
.1.3.6.1.4.1.9839.2.1.3.10- Type
- scalar
- Access
- readonly
- Status
- current
- Units
- N/A
- Parent
- integerObjects
- Siblings
- 96
Syntax
N/A Integer32
Values & Constraints
Object Constraints
range: -32768-32767
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| disch-air-lo-sp Lower Limit alarm of discharge air temp | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.1 |
| c1-hours-l Compressor 1 Runtime -This point applies to DX unit with one compressor -low | scalar | hour Integer32 | .1.3.6.1.4.1.9839.2.1.3.11 |
| c2-hours-h Compressor 2 Runtime -This point applies to DX unit with dual compressor - high | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.12 |
| c2-hours-l Compressor 2 Runtime -This point applies to DX unit with dual compressor - low | scalar | hour Integer32 | .1.3.6.1.4.1.9839.2.1.3.13 |
| ht1-hours-h Heater 1 Runtime - high | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.14 |
| ht1-hours-l Heater 1 Runtime - low | scalar | hour Integer32 | .1.3.6.1.4.1.9839.2.1.3.15 |
| current-second Current second | scalar | sec Integer32 | .1.3.6.1.4.1.9839.2.1.3.16 |
| current-minute Current minute | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.17 |
| current-hour Current hour | scalar | hour Integer32 | .1.3.6.1.4.1.9839.2.1.3.18 |
| current-day Current day | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.19 |
| humidity-dis Relative humidity displayed as xx% | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.2 |
| current-month Current month | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.20 |
| current-year Current year | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.21 |
| firestat-sp Alarm settting of return air temp to determine there is a fire | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.22 |
| hum-hi-sp Humidity upper limit alarm | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.23 |
| ret-air-hi-sp Upper limit alarm of return air temp | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.24 |
| hum-lo-sp Humidity lower limit alarm | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.25 |
| ret-air-lo-sp Lower limit alarm of return air temp | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.26 |
| hum-deadband amount hum must change from setpoint before acting | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.27 |
| hum-setpoint humidity setpoint | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.28 |
| start-dly Time before the system starts up | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.29 |
| stages-on Cooling Stages On, DX only | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.3 |
| alm1-del Optional Alarm 1 Delay | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.30 |
| alm2-del Optional Alarm 2 Delay | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.31 |
| alm3-del Optional Alarm 3 Delay | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.32 |
| alarm1-txt Message on optional alarm screen, some also add function | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.33 |
| alarm2-txt Message on optional alarm screen, some also add function | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.34 |
| alarm3-txt Message on optional alarm screen, some also add function | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.35 |
| alarm4-txt Message on optional alarm screen, some also add function | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.36 |
| comp-sel Comps 0=none, 1=one, 2=one+UL, 3=two, 4=two+UL, 5=Four/two circuit | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.37 |
| dehum-mode 0=none, 1= comp limited, 2=twocomp limited, 3= comp unlimited, 4=twocomp unlimited | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.38 |
| reheat-sel Number of heat stages | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.39 |
| heaters-on Number of heat stages running | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.4 |
| hum-sel 0=none, 1=comp mod, 2=comp non, 3= comf mod, 4= conf non mod | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.40 |
| alm-contact-msg Text displayed on all alarm screens | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.41 |
| powerup-sel 0= start wo/alarm, 1= start w/alarm, 2= requires reset of alarm | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.42 |
| buzzer-select 0=None, 1=short beeps, 2=long beep, 3=Constant | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.43 |
| cw-disp % of 10volts of analog output #1 | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.44 |
| wtrvlv-duty Chilled Water Utilization Over Last Hour - This applies to Chilled water or Energy saver units. | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.45 |
| hum-hours-h Humidifier Runtime - high | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.46 |
| hum-hours-l Humidifier Runtime - low | scalar | hour Integer32 | .1.3.6.1.4.1.9839.2.1.3.47 |
| blower-hours-h Blower Runtime - high | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.48 |
| blower-hours-l Blower Runtime - low | scalar | hour Integer32 | .1.3.6.1.4.1.9839.2.1.3.49 |
| minmax-24hr-hum-maximum Maximum humidity in last 24hrs | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.5 |
| alm4-del Optional Alarm 4 Delay | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.50 |
| assist-sel 0= no comp assist, 1=one comp assist, 2= two comp assist, 3... 4... | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.51 |
| wtrvlv-sel Water valve type 0=none, 1=chill, 2=Engy, 3=Aux chill, 4=Disc Reg | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.52 |
| wtrvlv-volts-sel Water valve voltage 0= 0-10, 1=2-10, 2=7-10, 3=6-9, 4=4-7 | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.53 |
| hum-volts % of 10volts of analog output #2 | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.54 |
| dehum-hours-h Dehumidifier Runtime - High | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.55 |
| dehum-hours-l Dehumidifier Runtime - Low | scalar | hour Integer32 | .1.3.6.1.4.1.9839.2.1.3.56 |
| autoflush-dly Time between drain cycles 0=12hr, 1=24hr, 2=48hr, 3=96hr, 4=None | scalar | hour Integer32 | .1.3.6.1.4.1.9839.2.1.3.58 |
| y4-out Value sent to optional analog output#1 | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.59 |
| minmax-24hr-hum-minumum Minimum humidity in last 24hrs | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.6 |
| y5-out Value sent to optional analog output#2 | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.60 |
| air-flow Current Fan Airflow - Based on calculated Pressure Diff formula | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.61 |
| opt-snsr1-name Name of the sensor | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.62 |
| opt-sns-1-ain-type Analog Sensor 1 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170} | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.63 |
| opt-snsr2-name Name of the sensor | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.64 |
| opt-sns-2-ain-type Analog Sensor 2 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170} | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.65 |
| opt-snsr3-name Name of the sensor | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.66 |
| opt-sns-3-ain-type Analog Sensor 3 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170} | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.67 |
| opt-snsr4-name Name of the sensor | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.68 |
| opt-sns-4-ain-type Analog Sensor 4 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170} | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.69 |
| comp-duty Cooling Utilization Over Last Hour -Percentage of cooling is used in the last hour of operation; this point applies to DX unit. | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.7 |
| cw-fan-speed-bms CW Fan speed (%) sent via BMS | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.70 |
| dx-fan-speed-bms DX Fan speed (%) sent via BMS | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.71 |
| fan-speed-max Maximum Fan speed (% of output) modulation. | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.72 |
| fan-speed-min Minimum Fan speed (% of output) modulation from pressure. | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.73 |
| fan-pr-sp Fan pressure setpoint (0.01 inches of water) | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.74 |
| fan-pr-band Fan pressure band (0.01 inches of water) | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.75 |
| fan-af-max Maximum air flow limit of setpoint from BMS or valve modulation. | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.76 |
| fan-af-min Minimum air flow limit of setpoint from BMS or valve modulation. | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.77 |
| fan-kfactor Fan K Factor | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.78 |
| num-fans Number of fans installed in this unit | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.79 |
| heat-duty Heating Utilization Over Last Hour -Percentage of heating is used in the last hour of operation | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.8 |
| ht2-hours-h Heater 2 Runtime - high | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.81 |
| ht2-hours-l Heater 2 Runtime - low | scalar | hour Integer32 | .1.3.6.1.4.1.9839.2.1.3.82 |
| ht3-hours-h Heater 3 Runtime - high | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.83 |
| ht3-hours-l Heater 3 Runtime - low | scalar | hour Integer32 | .1.3.6.1.4.1.9839.2.1.3.84 |
| engy-hours-h Energy Saver Runtime - This optional point applies to energy saver units only -high | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.85 |
| engy-hours-l Energy Saver Runtime - This optional point applies to energy saver units only - low | scalar | hour Integer32 | .1.3.6.1.4.1.9839.2.1.3.86 |
| cw-hours-h Chilled Water Runtime - This applies to chilled water units only - high | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.87 |
| cw-hours-l Chilled Water Runtime - This applies to chilled water units only - low | scalar | hour Integer32 | .1.3.6.1.4.1.9839.2.1.3.88 |
| c3-hours-h Compressor 3 Runtime - This applies when unit has four stages tandem compressors - high | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.89 |
| hum-duty Humidifier Utilization Over Last Hour -Percentage of humidifier is used in the last hour of operation | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.9 |
| c3-hours-l Compressor 3 Runtime - This applies when unit has four stages tandem compressors - low | scalar | hour Integer32 | .1.3.6.1.4.1.9839.2.1.3.90 |
| c4-hours-l Compressor 4 Runtime - This applies when unit has four stages tandem compressors. - high | scalar | hour Integer32 | .1.3.6.1.4.1.9839.2.1.3.91 |
| c4-hours-h Compressor 4 Runtime - This applies when unit has four stages tandem compressors. - low | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.92 |
| cond-hours-h Condenser Runtime - high | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.93 |
| cond-hours-l Condenser Runtime - low | scalar | hour Integer32 | .1.3.6.1.4.1.9839.2.1.3.94 |
| dx-fan-speed Fan speed (% of output) when compressor cooling. | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.95 |
| cw-fan-speed Fan speed (% of output) when cold water cooling. | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.96 |
| fan-af-dx-sp Fan air flow setpoint for DX unit (cfm) | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.97 |
| fan-af-cw-sp Fan air flow setpoint for CW unit (cfm) | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.98 |
| zm-airflow-sp Zone Airflow Setpoint kcfm | scalar | N/A Integer32 | .1.3.6.1.4.1.9839.2.1.3.99 |