dot5PhysMgmtBoardMode

This object defines the mode of the board.  In Auto Mode, the
board is using its hardware defaults. The default values of the
board are all ports enabled, speed selected by the HW jumper on
the board, the FNB attempts to attach left and right and not
bypassed, ring port phantom current (if applicable) is controlled 
via a HW switch, and selectable media (if applicable) is managed
also via a HW switch.  In Management Mode, the hardware defaults 
may be overridden by network or local management.  If the mode
of the board is indeterminate, such as an Ethernet MIM, then the
value unknown is returned.  A write to this object will place the
board into either management or auto mode, provided this MIM falls 
within the domain of the device.  If the MIM falls outside of the 
domain of the device, the SNMP error BadValue will be returned. A 
write request with the value unknown also returns the SNMP error 
BadValue.

MIB

DOT5-PHYS-MIB

OID

.1.3.6.1.4.1.52.4.1.1.6.1.2.1.1.15

Type

column

Access

readwrite

Status

mandatory

Parent

dot5PhysMgmtBoardEntry