docsQosServiceFlowBufferSize
DOCS-QOS3-MIB ·
.1.3.6.1.4.1.4491.2.1.21.1.3.1.17
Object
column
bytes Unsigned32
This attribute specifies the buffer size for the service flow. For the CM this attribute only applies to upstream Service Flows, for the CMTS this attribute only applies to downstream Service Flows, in other cases it is reported as 0.
Context
- MIB
- DOCS-QOS3-MIB
- OID
.1.3.6.1.4.1.4491.2.1.21.1.3.1.17- Type
- column
- Access
- readonly
- Status
- current
- Units
- bytes
- Parent
- docsQosServiceFlowEntry
- Table
- docsQosServiceFlowTable
- Siblings
- 12
Syntax
bytes Unsigned32
Values & Constraints
Object Constraints
range: 0-4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| docsQosServiceFlowId This key represents an identifier assigned to a Service
Flow by CMTS within a MAC Domain.
The value 0 is used only for the purpose of reporting instances
of the PktClass object pe… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.1.21.1.3.1.1 |
| docsQosServiceFlowChSetId This attribute represents the Channel Set Id associated
with the service flow. | column | DOCS-IF3-MIBChSetId | .1.3.6.1.4.1.4491.2.1.21.1.3.1.10 |
| docsQosServiceFlowAttrAssignSuccess If set to 'true', this attribute indicates that the
current channel set associated with the service flow
meets the Required and Forbidden Attribute Mask encodings.
Since this attr… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4491.2.1.21.1.3.1.11 |
| docsQosServiceFlowDsid This attribute indicates the DSID associated with
the downstream service flow. downstream service flows
without a DSID or upstream Service Flows report
the value zero. | column | DOCS-IF3-MIBDsid | .1.3.6.1.4.1.4491.2.1.21.1.3.1.12 |
| docsQosServiceFlowMaxReqPerSidCluster This attribute specifies the maximum number of requests
that a CM can make within a given SID Cluster before it must
switch to a different SID Cluster to make further requests.
A … | column | bytes Unsigned32 | .1.3.6.1.4.1.4491.2.1.21.1.3.1.13 |
| docsQosServiceFlowMaxOutstandingBytesPerSidCluster This attribute specifies the maximum number of bytes
for which a CM can have requests outstanding on a given
SID Cluster. If defined number of bytes are outstanding
and further re… | column | bytes SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.1.21.1.3.1.14 |
| docsQosServiceFlowMaxTotBytesReqPerSidCluster This attribute specifies the maximum total number of bytes
a CM can have requested using a given SID Cluster before it
must switch to a different SID Cluster to make further
reque… | column | bytes SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.1.21.1.3.1.15 |
| docsQosServiceFlowMaxTimeInSidCluster This attribute specifies the maximum time in milliseconds
that a CM may use a particular SID Cluster before it must
switch to a different SID Cluster to make further requests.
A v… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.4491.2.1.21.1.3.1.16 |
| docsQosServiceFlowSID Service Identifier (SID) assigned to an admitted
or active Service Flow. This attribute
reports a value of 0 if a Service ID is not associated with
the Service Flow. Only active… | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.21.1.3.1.6 |
| docsQosServiceFlowDirection This attribute represents the direction of the Service
Flow. | column | IfDirection | .1.3.6.1.4.1.4491.2.1.21.1.3.1.7 |
| docsQosServiceFlowPrimary This attribute reflects whether Service Flow is the
primary
or a secondary Service Flow. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4491.2.1.21.1.3.1.8 |
| docsQosServiceFlowParamSetTypeStatus This attribute represents the status of the service
flow based on the admission state.
'active' bit set to '1' indicates that the service flow
is active and that the corresponding… | column | Bits | .1.3.6.1.4.1.4491.2.1.21.1.3.1.9 |