docsQosPktClassCmInterfaceMask
DOCS-QOS3-MIB ·
.1.3.6.1.4.1.4491.2.1.21.1.1.1.30
Object
column
DocsL2vpnIfList
This attribute represents a bit-mask of the CM in-bound interfaces to which this classifer applies. This attribute only applies to QOS upstream Classifiers and upstream Drop Classifiers. For QOS downstream classifiers this object reports the zero-length string.
Context
- MIB
- DOCS-QOS3-MIB
- OID
.1.3.6.1.4.1.4491.2.1.21.1.1.1.30- Type
- column
- Access
- readonly
- Status
- current
- Parent
- docsQosPktClassEntry
- Table
- docsQosPktClassTable
- Siblings
- 30
Syntax
DocsL2vpnIfList
- Source
- DocsL2vpnIfList
- Base type
Bits
Values & Constraints
Type Values
0 | eCm |
1 | cmci |
2 | docsCableMacLayer |
3 | docsCableDownstream |
4 | docsCableUpstream |
5 | tistub5 |
6 | tistub6 |
7 | tistub7 |
8 | tistub8 |
9 | tistub9 |
10 | tistub10 |
11 | tistub11 |
12 | tistub12 |
13 | tistub13 |
14 | tistub14 |
15 | tistub15 |
16 | eMta |
17 | eStbIp |
18 | eStbDsg |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| docsQosPktClassId This key indicates the assigned identifier to the
packet classifier instance by the CMTS, which is unique
per Service Flow.
For UDCs this corresponds to the Service Flow Reference… | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.21.1.1.1.1 |
| docsQosPktClassIpDestAddr This attribute specifies the value of the IP Destination
Address required for packets to match this rule.
An IP packet matches the rule when the packet IP Destinati… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.4491.2.1.21.1.1.1.10 |
| docsQosPktClassIpDestMask This attribute specifies which bits of a packet's
IP Destination Address are compared to match this rule.
An IP packet matches the rule when the packet destination
… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.4491.2.1.21.1.1.1.11 |
| docsQosPktClassSourcePortStart This attribute specifies the low-end inclusive range
of TCP/UDP source port numbers to which a packet
is compared. This attribute is irrelevant for non-TCP/UDP
IP packets.
If the… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.4491.2.1.21.1.1.1.12 |
| docsQosPktClassSourcePortEnd This attribute specifies the high-end inclusive
range of TCP/UDP source port numbers to which a packet
is compared. This attribute is irrelevant for non-TCP/UDP
IP packets.
If th… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.4491.2.1.21.1.1.1.13 |
| docsQosPktClassDestPortStart This attribute specifies the low-end inclusive range
of TCP/UDP destination port numbers to which a packet
is compared.
If the referenced parameter is not present in a classifier… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.4491.2.1.21.1.1.1.14 |
| docsQosPktClassDestPortEnd This attribute specifies the high-end inclusive
range of TCP/UDP destination port numbers to which a
packet is compared.
If the referenced parameter is not present in a classifier… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.4491.2.1.21.1.1.1.15 |
| docsQosPktClassDestMacAddr An Ethernet packet matches an entry when its destination
MAC address bitwise ANDed with DestMacMask equals
the value of DestMacAddr.
If the referenced parameter is not present in … | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.4491.2.1.21.1.1.1.16 |
| docsQosPktClassDestMacMask An Ethernet packet matches an entry when its destination
MAC address bitwise ANDed with DestMacMask equals
the value of DestMacAddr.
If the referenced parameter is not present in … | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.4491.2.1.21.1.1.1.17 |
| docsQosPktClassSourceMacAddr An Ethernet packet matches this entry when its source
MAC address equals the value of this attribute.
If the referenced parameter is not present in a classifier,
this attribute re… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.4491.2.1.21.1.1.1.18 |
| docsQosPktClassEnetProtocolType This attribute indicates the format of the layer 3
protocol ID in the Ethernet packet. A value of 'none'
means that the rule does not use the layer 3 protocol type
as a matching … | column | Enumeration | .1.3.6.1.4.1.4491.2.1.21.1.1.1.19 |
| docsQosPktClassDirection This attribute indicates the direction to which the
classifier is applied. | column | IfDirection | .1.3.6.1.4.1.4491.2.1.21.1.1.1.2 |
| docsQosPktClassEnetProtocol If EnetProtocolType is 'none', this attribute is
ignored when considering whether a packet matches the
current rule.
If EnetProtocolType is 'ethertype', this attribute
gives the 1… | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.21.1.1.1.20 |
| docsQosPktClassUserPriLow This attribute applies only to Ethernet frames using
the 802.1P/Q tag header (indicated with EtherType
0x8100). Such frames include a 16-bit Tag that contains
a 3-bit Priority fi… | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.21.1.1.1.22 |
| docsQosPktClassUserPriHigh This attribute applies only to Ethernet frames using
the 802.1P/Qtag header (indicated with EtherType
0x8100). Such frames include a 16-bit Tag that contains
a 3-bit Priority fie… | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.21.1.1.1.23 |
| docsQosPktClassVlanId This attribute applies only to Ethernet frames
using the 802.1P/Q tag header.
Tagged packets must have a VLAN Identifier that matches
the value in order to match the rule.
If the … | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.21.1.1.1.24 |
| docsQosPktClassState This attribute indicates whether or not the classifier
is enabled to classify packets to a Service Flow.
If the referenced parameter is not present in the classifie… | column | Enumeration | .1.3.6.1.4.1.4491.2.1.21.1.1.1.25 |
| docsQosPktClassPkts This attribute counts the number of packets that have
been classified using this entry. This includes
all packets delivered to a Service Flow maximum rate
policing function, wheth… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.4491.2.1.21.1.1.1.26 |
| docsQosPktClassBitMap This attribute indicates which parameter encodings
were actually present in the DOCSIS packet classifier
encoding signaled in the DOCSIS message that created
or modified the class… | column | Bits | .1.3.6.1.4.1.4491.2.1.21.1.1.1.27 |
| docsQosPktClassIpAddrType This attribute indicates the type of the Internet
address for InetSourceAddr, InetSourceMask, InetDestAddr,
and InetDestMask.
If the referenced parameter is not present in a class… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.4491.2.1.21.1.1.1.28 |
| docsQosPktClassFlowLabel This attribute represents the Flow Label field in
the IPv6 header to be matched by the classifier.
The value zero indicates that the Flow Label is not specified
as part of the cla… | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.21.1.1.1.29 |
| docsQosPktClassPriority This attribute specifies the order of evaluation
of the classifiers.
The higher the value, the higher the priority.
The value of 0 is used as default in provisioned Service
Flows … | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.21.1.1.1.3 |
| docsQosPktClassIcmpTypeLow This attribute specifies the low-end inclusive range of the
ICMP type numbers to which a packet is compared. If the
referenced parameter is not present in a classifier, this
attri… | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.21.1.1.1.31 |
| docsQosPktClassIcmpTypeHigh This attribute specifies the high-end inclusive range of the
ICMP type numbers to which a packet is compared. If the
referenced parameter is not present in a classifier, this
attr… | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.21.1.1.1.32 |
| docsQosPktClassIpTosLow This attribute indicates the low value of a range of
TOS byte values.
If the referenced parameter is not present in a classifier,
this attribute reports the value of 0.
… | column | OctetString | .1.3.6.1.4.1.4491.2.1.21.1.1.1.4 |
| docsQosPktClassIpTosHigh This attribute indicates the 8-bit high value of a
range of TOS byte values.
If the referenced parameter is not present in a classifier,
this attribute reports the value of 0.
The… | column | OctetString | .1.3.6.1.4.1.4491.2.1.21.1.1.1.5 |
| docsQosPktClassIpTosMask This attribute indicates the mask value is bitwise
ANDed with TOS byte in an IP packet, and this value is
used for range checking of TosLow and TosHigh.
If the refe… | column | OctetString | .1.3.6.1.4.1.4491.2.1.21.1.1.1.6 |
| docsQosPktClassIpProtocol This attribute indicates the value of the IP Protocol
field required for IP packets to match this rule.
The value 256 matches traffic with any IP Protocol value.
Th… | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.21.1.1.1.7 |
| docsQosPktClassIpSourceAddr This attribute specifies the value of the IP Source
Address required for packets to match this rule.
An IP packet matches the rule when the packet IP Source
Address bitwise ANDed … | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.4491.2.1.21.1.1.1.8 |
| docsQosPktClassIpSourceMask This attribute specifies which bits of a packet's
IP Source Address are compared to match this rule.
An IP packet matches the rule when the packet source address
bitwise ANDed wit… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.4491.2.1.21.1.1.1.9 |