docsIetfQosPktClassInetAddressType
DOCS-IETF-QOS-MIB ·
.1.3.6.1.2.1.127.1.1.1.8
Object
column
INET-ADDRESS-MIBInetAddressType
The type of the Internet address for
docsIetfQosPktClassInetSourceAddr,
docsIetfQosPktClassInetSourceMask,
docsIetfQosPktClassInetDestAddr, and
docsIetfQosPktClassInetDestMask.
If the referenced parameter is not present
in a classifier, this object reports the value of
ipv4(1).
Context
- MIB
- DOCS-IETF-QOS-MIB
- OID
.1.3.6.1.2.1.127.1.1.1.8- Type
- column
- Access
- readonly
- Status
- current
- Parent
- docsIetfQosPktClassEntry
- Table
- docsIetfQosPktClassTable
- Siblings
- 26
Syntax
INET-ADDRESS-MIBInetAddressType
- Source
- INET-ADDRESS-MIBInetAddressType
- Base type
Enumeration
Values & Constraints
Type Values
0 | unknown |
1 | ipv4 |
2 | ipv6 |
3 | ipv4z |
4 | ipv6z |
16 | dns |
25 | l2vpn |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| docsIetfQosPktClassId Index assigned to packet classifier entry by
the CMTS, which is unique per Service Flow. | column | Unsigned32 | .1.3.6.1.2.1.127.1.1.1.1 |
| docsIetfQosPktClassInetSourceMask This object specifies which bits of a packet's
IP Source Address are compared to match
this rule.
An IP packet matches the rule when the packet
source address bitwi… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.127.1.1.1.10 |
| docsIetfQosPktClassInetDestAddr This object specifies the value of the IP
Destination Address required for packets to match
this rule.
An IP packet matches the rule when the packet
IP Destination … | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.127.1.1.1.11 |
| docsIetfQosPktClassInetDestMask This object specifies which bits of a packet's
IP Destination Address are compared to
match this rule.
An IP packet matches the rule when the packet
destination add… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.127.1.1.1.12 |
| docsIetfQosPktClassSourcePortStart This object specifies the low-end inclusive
range of TCP/UDP source port numbers to which
a packet is compared. This object is irrelevant
for non-TCP/UDP IP packets.
… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.2.1.127.1.1.1.13 |
| docsIetfQosPktClassSourcePortEnd This object specifies the high-end inclusive
range of TCP/UDP source port numbers to which
a packet is compared. This object is irrelevant
for non-TCP/UDP IP packets.
… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.2.1.127.1.1.1.14 |
| docsIetfQosPktClassDestPortStart This object specifies the low-end inclusive
range of TCP/UDP destination port numbers to
which a packet is compared.
If the referenced parameter is not present
in a… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.2.1.127.1.1.1.15 |
| docsIetfQosPktClassDestPortEnd This object specifies the high-end inclusive
range of TCP/UDP destination port numbers to which
a packet is compared.
If the referenced parameter is not present
in … | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.2.1.127.1.1.1.16 |
| docsIetfQosPktClassDestMacAddr An Ethernet packet matches an entry when its
destination MAC address bitwise ANDed with
docsIetfQosPktClassDestMacMask equals the value of
docsIetfQosPktClassDestMacAddr.
… | column | SNMPv2-TCMacAddress | .1.3.6.1.2.1.127.1.1.1.17 |
| docsIetfQosPktClassDestMacMask An Ethernet packet matches an entry when its
destination MAC address bitwise ANDed with
docsIetfQosPktClassDestMacMask equals the value of
docsIetfQosPktClassDestMacAddr.
… | column | SNMPv2-TCMacAddress | .1.3.6.1.2.1.127.1.1.1.18 |
| docsIetfQosPktClassSourceMacAddr An Ethernet packet matches this entry when its
source MAC address equals the value of
this object.
If the referenced parameter is not present
in a classifier, this … | column | SNMPv2-TCMacAddress | .1.3.6.1.2.1.127.1.1.1.19 |
| docsIetfQosPktClassDirection Indicates the direction to which the classifier
is applied. | column | DocsIetfQosRfMacIfDirection | .1.3.6.1.2.1.127.1.1.1.2 |
| docsIetfQosPktClassEnetProtocolType This object indicates the format of the layer 3
protocol ID in the Ethernet packet. A value of
none(0) means that the rule does not use the
layer 3 protocol type as a matching cr… | column | Enumeration | .1.3.6.1.2.1.127.1.1.1.20 |
| docsIetfQosPktClassEnetProtocol If docsIetfQosEthPktClassProtocolType is none(0),
this object is ignored when considering whether
a packet matches the current rule.
If dosQosPktClassEnetProtocolTy… | column | Integer32 | .1.3.6.1.2.1.127.1.1.1.21 |
| docsIetfQosPktClassUserPriLow This object applies only to Ethernet frames
using the 802.1P/Q tag header (indicated with
EtherType 0x8100). Such frames include a 16-bit
Tag that contains a 3-bit Priority field… | column | Integer32 | .1.3.6.1.2.1.127.1.1.1.22 |
| docsIetfQosPktClassUserPriHigh This object applies only to Ethernet frames
using the 802.1P/Qtag header (indicated with
EtherType 0x8100). Such frames include a 16-bit
Tag that contains a 3-bit Priority field … | column | Integer32 | .1.3.6.1.2.1.127.1.1.1.23 |
| docsIetfQosPktClassVlanId This object applies only to Ethernet frames
using the 802.1P/Q tag header.
Tagged packets must have a VLAN Identifier that
matches the value in order to match the r… | column | Integer32 | .1.3.6.1.2.1.127.1.1.1.24 |
| docsIetfQosPktClassStateActive This object indicates whether or not the classifier
is enabled to classify packets to a Service Flow.
If the referenced parameter is not present in the
classifier, … | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.127.1.1.1.25 |
| docsIetfQosPktClassPkts This object counts the number of packets that have
been classified using this entry. This
includes all packets delivered to a Service Flow
maximum rate policing function, whether… | column | SNMPv2-SMICounter64 | .1.3.6.1.2.1.127.1.1.1.26 |
| docsIetfQosPktClassBitMap This object indicates which parameter encodings
were actually present in the DOCSIS packet
classifier encoding signaled in the DOCSIS message
that created or modified the classifi… | column | Bits | .1.3.6.1.2.1.127.1.1.1.27 |
| docsIetfQosPktClassPriority The value specifies the order of evaluation
of the classifiers.
The higher the value, the higher the priority.
The value of 0 is used as default in
provisioned Serv… | column | Integer32 | .1.3.6.1.2.1.127.1.1.1.3 |
| docsIetfQosPktClassIpTosLow The low value of a range of TOS byte values.
If the referenced parameter is not present
in a classifier, this object reports the value
of 0.
The IP TOS octet, as or… | column | OctetString | .1.3.6.1.2.1.127.1.1.1.4 |
| docsIetfQosPktClassIpTosHigh The 8-bit high value of a range of TOS byte
values.
If the referenced parameter is not present
in a classifier, this object reports the
value of 0.
T… | column | OctetString | .1.3.6.1.2.1.127.1.1.1.5 |
| docsIetfQosPktClassIpTosMask The mask value is bitwise ANDed with TOS byte
in an IP packet, and this value is used for
range checking of TosLow and TosHigh.
If the referenced parameter is not p… | column | OctetString | .1.3.6.1.2.1.127.1.1.1.6 |
| docsIetfQosPktClassIpProtocol This object indicates the value of the IP
Protocol field required for IP packets to match
this rule.
The value 256 matches traffic with any IP Protocol
value. The … | column | Integer32 | .1.3.6.1.2.1.127.1.1.1.7 |
| docsIetfQosPktClassInetSourceAddr This object specifies the value of the IP
Source Address required for packets to match
this rule.
An IP packet matches the rule when the packet
IP Source Address bi… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.127.1.1.1.9 |