dlswTConnConfigSapList
DLSW-MIB ·
.1.3.6.1.2.1.46.1.2.2.1.9
Object
column
r/w
OctetString
The SAP list indicates which SAPs are advertised to
the transport connection defined by this conceptual
row. Only SAPs with even numbers are represented,
in the form of the most significant bit of the first
octet representing the SAP 0, the next most significant
bit representing the SAP 2, to the least significant
bit of the last octet representing the SAP 254. Data
link switching is allowed for those SAPs which have
one in its corresponding bit, not allowed otherwise.
The whole SAP list has to be changed together. Changing
the SAP list affects only new circuit establishments
and has no effect on established circuits.
This list can be used to restrict specific partners
from knowing about all the SAPs used by DLSw on all its
interfaces (these are represented in dlswIfSapList for
each interface). For instance, one may want to run NetBIOS
with some partners but not others.
If a node supports sending run-time capabilities exchange
messages, changes to this object should cause that action.
When to start the run-time capabilities exchange is
implementation-specific.
The DEFVAL below indicates support for SAPs 0, 4, 8, and C.
Context
- MIB
- DLSW-MIB
- OID
.1.3.6.1.2.1.46.1.2.2.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- dlswTConnConfigEntry
- Table
- dlswTConnConfigTable
- Siblings
- 12
Syntax
OctetString
Values & Constraints
Object Constraints
range: 16-16
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dlswTConnConfigIndex The index to the conceptual row of the table.
Negative numbers are not allowed. There
are objects defined that point to conceptual
rows of this table with this index value.
Zero … | column | Integer32 | .1.3.6.1.2.1.46.1.2.2.1.1 |
| dlswTConnConfigAdvertiseMacNB The value of true indicates that any defined local MAC
addresses and NetBIOS names will be advertised to a
partner node via initial and (if supported) run-time
capabilities exchan… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.46.1.2.2.1.10 |
| dlswTConnConfigInitCirRecvWndw The initial circuit receive pacing window size, in the unit
of SSP messages, to be used for future transport connections
activated using this table row. The managed node sends th… | column | SSP messages Integer32 | .1.3.6.1.2.1.46.1.2.2.1.11 |
| dlswTConnConfigOpens Number of times transport connections entered
connected state according to the definition of
this conceptual row. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.46.1.2.2.1.12 |
| dlswTConnConfigRowStatus This object is used by the manager to create
or delete the row entry in the dlswTConnConfigTable
following the RowStatus textual convention. The value
of notInService will be use… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.46.1.2.2.1.13 |
| dlswTConnConfigTDomain The object identifier which indicates the transport
domain of this conceptual row. | column | ObjectIdentifier | .1.3.6.1.2.1.46.1.2.2.1.2 |
| dlswTConnConfigLocalTAddr The local transport address for this conceptual row
of the transport connection definition. | column | TAddress | .1.3.6.1.2.1.46.1.2.2.1.3 |
| dlswTConnConfigRemoteTAddr The remote transport address. Together with
dlswTConnConfigEntryType and dlswTConnConfigGroupDefinition,
the object instance of this conceptual row identifies a
collection of the… | column | TAddress | .1.3.6.1.2.1.46.1.2.2.1.4 |
| dlswTConnConfigLastModifyTime The time (in hundredths of a second) since the value of
any object in this conceptual row except for
dlswTConnConfigOpens was last changed. This value
may be compared to dlswTCon… | column | hundredths of a second SNMPv2-SMITimeTicks | .1.3.6.1.2.1.46.1.2.2.1.5 |
| dlswTConnConfigEntryType The object instance signifies the type of entry in the
associated conceptual row. The value of `individual'
means that the entry applies to a specific partner DLSw
node as identi… | column | Enumeration | .1.3.6.1.2.1.46.1.2.2.1.6 |
| dlswTConnConfigGroupDefinition For conceptual rows of `individual' and `global' as
specified in dlswTConnConfigEntryType, the instance
of this object is `0.0'. For conceptual rows of
`group', the instance poi… | column | SNMPv2-TCRowPointer | .1.3.6.1.2.1.46.1.2.2.1.7 |
| dlswTConnConfigSetupType This value of the instance of a conceptual row
identifies the behavior of the collection of
transport connections that this conceptual row
defines. The value of ac… | column | Enumeration | .1.3.6.1.2.1.46.1.2.2.1.8 |