dlswCircuitFCRecvGrantedUnits
DLSW-MIB ·
.1.3.6.1.2.1.46.1.5.2.1.21
Object
column
Integer32
The current number of paced SSP messages that this DLSw has
authorized the partner DLSw to send on this circuit before
the partner DLSw must stop and wait for an additional flow
control indication from this DLSw.
The value zero should be returned if this circuit is not
running the DLSw pacing protocol.
Context
- MIB
- DLSW-MIB
- OID
.1.3.6.1.2.1.46.1.5.2.1.21- Type
- column
- Access
- readonly
- Status
- current
- Parent
- dlswCircuitEntry
- Table
- dlswCircuitTable
- Siblings
- 30
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dlswCircuitS1Mac The MAC Address of End Station 1 (S1) used for this circuit. | column | MacAddressNC | .1.3.6.1.2.1.46.1.5.2.1.1 |
| dlswCircuitS2Location The location of End Station 2 (S2).
If the location of End Station 2 is local, the
interface information will be available in the
conceptual row whose S1 and S2 are the S2 and
the… | column | EndStationLocation | .1.3.6.1.2.1.46.1.5.2.1.10 |
| dlswCircuitS2TDomain If the location of End Station 2 is remote,
this value is the transport domain of the
transport protocol the circuit is running
over. Otherwise, the value is 0.0. | column | ObjectIdentifier | .1.3.6.1.2.1.46.1.5.2.1.11 |
| dlswCircuitS2TAddress If the location of End Station 2 is remote,
this object contains the address of the partner
DLSw, else it will be an OCTET STRING of zero length. | column | TAddress | .1.3.6.1.2.1.46.1.5.2.1.12 |
| dlswCircuitS2CircuitId The Circuit ID assigned to this circuit by the partner
DLSw node. The first four octets are the DLC port Id, and
the second four octets are the Data Link Correlator.
If the DLSw … | column | OctetString | .1.3.6.1.2.1.46.1.5.2.1.13 |
| dlswCircuitOrigin This object specifies which of the two end stations
initiated the establishment of this circuit. | column | Enumeration | .1.3.6.1.2.1.46.1.5.2.1.14 |
| dlswCircuitEntryTime The amount of time (in hundredths of a second) since this
circuit table conceptual row was created. | column | hundredths of a second SNMPv2-SMITimeTicks | .1.3.6.1.2.1.46.1.5.2.1.15 |
| dlswCircuitStateTime The amount of time (in hundredths of a second) since this
circuit entered the current state. | column | hundredths of a second SNMPv2-SMITimeTicks | .1.3.6.1.2.1.46.1.5.2.1.16 |
| dlswCircuitState The current state of this circuit. The agent, implementation
specific, may choose to keep entries for some period of time
after circuit disconnect, so the manager can gather the … | column | Enumeration | .1.3.6.1.2.1.46.1.5.2.1.17 |
| dlswCircuitPriority The transmission priority of this circuit as understood by
this DLSw node. This value is determined by the two DLSw
nodes at circuit startup time. If this DLSw node does not
sup… | column | Enumeration | .1.3.6.1.2.1.46.1.5.2.1.18 |
| dlswCircuitFCSendGrantedUnits The number of paced SSP messages that this DLSw is currently
authorized to send on this circuit before it must stop and
wait for an additional flow control indication from the
par… | column | Integer32 | .1.3.6.1.2.1.46.1.5.2.1.19 |
| dlswCircuitS1Sap The SAP at End Station 1 (S1) used for this circuit. | column | OctetString | .1.3.6.1.2.1.46.1.5.2.1.2 |
| dlswCircuitFCSendCurrentWndw The current window size that this DLSw is using in its role
as a data sender. This is the value by which this DLSw would
increase the number of messages it is authorized to send,… | column | Integer32 | .1.3.6.1.2.1.46.1.5.2.1.20 |
| dlswCircuitFCRecvCurrentWndw The current window size that this DLSw is using in its role
as a data receiver. This is the number of additional paced
SSP messages that this DLSw would be authorizing its DLSw
p… | column | Integer32 | .1.3.6.1.2.1.46.1.5.2.1.22 |
| dlswCircuitFCLargestRecvGranted The largest receive window size granted by this DLSw during
the current activation of this circuit. This is not the
largest number of messages granted at any time, but the
larges… | column | SNMPv2-SMIGauge32 | .1.3.6.1.2.1.46.1.5.2.1.23 |
| dlswCircuitFCLargestSendGranted The largest send (with respect to this DLSw) window size
granted by the partner DLSw during the current activation of
this circuit.
The value zero should be returne… | column | SNMPv2-SMIGauge32 | .1.3.6.1.2.1.46.1.5.2.1.24 |
| dlswCircuitFCHalveWndwSents The number of Halve Window operations this DLSw has sent on
this circuit, in its role as a data receiver.
The value zero should be returned if this circuit is not
r… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.46.1.5.2.1.25 |
| dlswCircuitFCResetOpSents The number of Reset Window operations this DLSw has sent on
this circuit, in its role as a data receiver.
The value zero should be returned if this circuit is not
r… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.46.1.5.2.1.26 |
| dlswCircuitFCHalveWndwRcvds The number of Halve Window operations this DLSw has received on
this circuit, in its role as a data sender.
The value zero should be returned if this circuit is not… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.46.1.5.2.1.27 |
| dlswCircuitFCResetOpRcvds The number of Reset Window operations this DLSw has received on
this circuit, in its role as a data sender.
The value zero should be returned if this circuit is not
running the DL… | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.46.1.5.2.1.28 |
| dlswCircuitDiscReasonLocal The reason why this circuit was last disconnected, as seen
by this DLSw node.
This object is present only if the agent keeps circuit
table entries around for some p… | column | Enumeration | .1.3.6.1.2.1.46.1.5.2.1.29 |
| dlswCircuitS1IfIndex The ifEntry index of the local interface through which S1
can be reached. | column | Integer32 | .1.3.6.1.2.1.46.1.5.2.1.3 |
| dlswCircuitDiscReasonRemote The generic reason code why this circuit was last
disconnected, as reported by the DLSw partner in a HALT_DL
or HALT_DL_NOACK. If the partner does not send a reaso… | column | Enumeration | .1.3.6.1.2.1.46.1.5.2.1.30 |
| dlswCircuitDiscReasonRemoteData Implementation-specific data reported by the DLSw partner in
a HALT_DL or HALT_DL_NOACK, to help specify how and why this
circuit was last disconnected. If the partner does not s… | column | OctetString | .1.3.6.1.2.1.46.1.5.2.1.31 |
| dlswCircuitS1DlcType The DLC protocol in use between the DLSw node and S1. | column | DlcType | .1.3.6.1.2.1.46.1.5.2.1.4 |
| dlswCircuitS1RouteInfo If source-route bridging is in use between the DLSw
node and S1, this is the routing information field
describing the path between the two devices.
Otherwise the value will be an … | column | OctetString | .1.3.6.1.2.1.46.1.5.2.1.5 |
| dlswCircuitS1CircuitId The Circuit ID assigned by this DLSw node to this circuit.
The first four octets are the DLC port Id, and
the second four octets are the Data Link Correlator.
If the DLSw SSP was … | column | OctetString | .1.3.6.1.2.1.46.1.5.2.1.6 |
| dlswCircuitS1Dlc Points to a conceptual row of the underlying DLC MIB,
which could either be the standard MIBs (e.g., the SDLC),
or an enterprise-specific DLC MIB. | column | SNMPv2-TCRowPointer | .1.3.6.1.2.1.46.1.5.2.1.7 |
| dlswCircuitS2Mac The MAC Address of End Station 2 (S2) used for this circuit. | column | MacAddressNC | .1.3.6.1.2.1.46.1.5.2.1.8 |
| dlswCircuitS2Sap The SAP at End Station 2 (S2) used for this circuit. | column | OctetString | .1.3.6.1.2.1.46.1.5.2.1.9 |