rldot1dStpVlanTable

DLINK-3100-BRIDGEMIBOBJECTS-MIB · .1.3.6.1.4.1.171.10.94.89.89.57.2.6

Object

table

A table that contains vlan-specific information
for the Spanning Tree Protocol.

Context

MIB: DLINK-3100-BRIDGEMIBOBJECTS-MIB
OID: .1.3.6.1.4.1.171.10.94.89.89.57.2.6
Type: table
Status: current
Parent: rldot1dStp
Siblings: 24
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
rldot1dStpMibVersion MIB's version, the current version is 2.	scalar	Integer32	`.1.3.6.1.4.1.171.10.94.89.89.57.2.1`
rldot1dStpMonitorTime Factor of hello-time during which a port is monotored to determine if it is stable.	scalar	Integer32	`.1.3.6.1.4.1.171.10.94.89.89.57.2.10`
rldot1dStpBpduCount The number of bpdu that need to received for the link to be considered stable.	scalar	Integer32	`.1.3.6.1.4.1.171.10.94.89.89.57.2.11`
rldot1dStpLastChanged The last time any object in this table was changed by SNMP or other local management means.	scalar	RFC1155-SMITimeTicks	`.1.3.6.1.4.1.171.10.94.89.89.57.2.12`
rldot1dStpPortTable A table that contains extended pair port specific information.	table	-	`.1.3.6.1.4.1.171.10.94.89.89.57.2.13`
rldot1dStpPortsEnable Enable / Disable spanning tree on ports by default .	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.171.10.94.89.89.57.2.14`
rldot1dStpTaggedFlooding flooding can be done in tagged bpdu .	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.171.10.94.89.89.57.2.15`
rldot1dStpPortBelongToVlanDefault The default value of rldot1dStpPortMustBelongToVlan .	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.171.10.94.89.89.57.2.16`
rldot1dStpEnableByDefault The default value of rldot1dStpEnable .	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.171.10.94.89.89.57.2.17`
rldot1dStpPortToDefault To order port/s to revert to default setings .	scalar	Integer32	`.1.3.6.1.4.1.171.10.94.89.89.57.2.18`
rldot1dStpSupportedType The type of stp supported by the device.	scalar	Enumeration	`.1.3.6.1.4.1.171.10.94.89.89.57.2.19`
rldot1dStpType Specifies whether the device supports Spanning Tree per device, or per group.	scalar	Enumeration	`.1.3.6.1.4.1.171.10.94.89.89.57.2.2`
rldot1dStpEdgeportSupportInStp If EdgePort is supported in stpCompatible mode .	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.171.10.94.89.89.57.2.20`
rldot1dStpFilterBpdu Specified if the device should filter BPDUs when STP is disabled.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.171.10.94.89.89.57.2.21`
rldot1dStpFloodBpduMethod Specified flooding method: 1 - classic - untagged to all stp disabled ports 2 - bridging -normal bridging.	scalar	Enumeration	`.1.3.6.1.4.1.171.10.94.89.89.57.2.22`
rldot1dStpSeparatedBridges	node	-	`.1.3.6.1.4.1.171.10.94.89.89.57.2.23`
rldot1dStpPortBpduGuardTable A table that contains for each port whether it is bpdu guard .	table	-	`.1.3.6.1.4.1.171.10.94.89.89.57.2.24`
rldot1dStpLoopbackGuardEnable Define if STP loopback guard feature is globally enabled.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.171.10.94.89.89.57.2.25`
rldot1dStpEnable Enable / Disable spanning tree. When working in per vlan mode enable / disable STP per all vlans.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.171.10.94.89.89.57.2.3`
rldot1dStpPortMustBelongToVlan Specifies whether a port must belong to a VLAN in order to participate in the STP.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.171.10.94.89.89.57.2.4`
rldot1dStpExtendedPortNumberFormat Specifies whether the STP uses the extended port fnumber format.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.171.10.94.89.89.57.2.5`
rldot1dStpVlanPortTable A table that contains pair <vlan, port> specific information for the Spanning Tree Protocol.	table	-	`.1.3.6.1.4.1.171.10.94.89.89.57.2.7`
rldot1dStpTrapVariable	node	-	`.1.3.6.1.4.1.171.10.94.89.89.57.2.8`
rldot1dStpTypeAfterReset New mode of spaning tree supported by the device after the next reset.	scalar	Enumeration	`.1.3.6.1.4.1.171.10.94.89.89.57.2.9`

Child Objects