rldot1dStpMibVersion

DLINK-3100-BRIDGEMIBOBJECTS-MIB · .1.3.6.1.4.1.171.10.94.89.89.57.2.1
MIB view Table view

Object

scalar Integer32 
MIB's version, the current version is 2.

Context

MIB
DLINK-3100-BRIDGEMIBOBJECTS-MIB
OID
.1.3.6.1.4.1.171.10.94.89.89.57.2.1
Type
scalar
Access
readonly
Status
current
Parent
rldot1dStp
Siblings
24

Syntax

Integer32
Source
COPS-PR-SPPIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rldot1dStpMonitorTime
Factor of hello-time during which a port is monotored to determine if it is stable.
scalarInteger32.1.3.6.1.4.1.171.10.94.89.89.57.2.10
rldot1dStpBpduCount
The number of bpdu that need to received for the link to be considered stable.
scalarInteger32.1.3.6.1.4.1.171.10.94.89.89.57.2.11
rldot1dStpLastChanged
The last time any object in this table was changed by SNMP or other local management means.
scalarRFC1155-SMITimeTicks.1.3.6.1.4.1.171.10.94.89.89.57.2.12
rldot1dStpPortTable
A table that contains extended pair port specific information.
table-.1.3.6.1.4.1.171.10.94.89.89.57.2.13
rldot1dStpPortsEnable
Enable / Disable spanning tree on ports by default .
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.171.10.94.89.89.57.2.14
rldot1dStpTaggedFlooding
flooding can be done in tagged bpdu .
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.171.10.94.89.89.57.2.15
rldot1dStpPortBelongToVlanDefault
The default value of rldot1dStpPortMustBelongToVlan .
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.171.10.94.89.89.57.2.16
rldot1dStpEnableByDefault
The default value of rldot1dStpEnable .
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.171.10.94.89.89.57.2.17
rldot1dStpPortToDefault
To order port/s to revert to default setings .
scalarInteger32.1.3.6.1.4.1.171.10.94.89.89.57.2.18
rldot1dStpSupportedType
The type of stp supported by the device.
scalarEnumeration.1.3.6.1.4.1.171.10.94.89.89.57.2.19
rldot1dStpType
Specifies whether the device supports Spanning Tree per device, or per group.
scalarEnumeration.1.3.6.1.4.1.171.10.94.89.89.57.2.2
rldot1dStpEdgeportSupportInStp
If EdgePort is supported in stpCompatible mode .
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.171.10.94.89.89.57.2.20
rldot1dStpFilterBpdu
Specified if the device should filter BPDUs when STP is disabled.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.171.10.94.89.89.57.2.21
rldot1dStpFloodBpduMethod
Specified flooding method: 1 - classic - untagged to all stp disabled ports 2 - bridging -normal bridging.
scalarEnumeration.1.3.6.1.4.1.171.10.94.89.89.57.2.22
rldot1dStpSeparatedBridgesnode-.1.3.6.1.4.1.171.10.94.89.89.57.2.23
rldot1dStpPortBpduGuardTable
A table that contains for each port whether it is bpdu guard .
table-.1.3.6.1.4.1.171.10.94.89.89.57.2.24
rldot1dStpLoopbackGuardEnable
Define if STP loopback guard feature is globally enabled.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.171.10.94.89.89.57.2.25
rldot1dStpEnable
Enable / Disable spanning tree. When working in per vlan mode enable / disable STP per all vlans.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.171.10.94.89.89.57.2.3
rldot1dStpPortMustBelongToVlan
Specifies whether a port must belong to a VLAN in order to participate in the STP.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.171.10.94.89.89.57.2.4
rldot1dStpExtendedPortNumberFormat
Specifies whether the STP uses the extended port fnumber format.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.171.10.94.89.89.57.2.5
rldot1dStpVlanTable
A table that contains vlan-specific information for the Spanning Tree Protocol.
table-.1.3.6.1.4.1.171.10.94.89.89.57.2.6
rldot1dStpVlanPortTable
A table that contains pair <vlan, port> specific information for the Spanning Tree Protocol.
table-.1.3.6.1.4.1.171.10.94.89.89.57.2.7
rldot1dStpTrapVariablenode-.1.3.6.1.4.1.171.10.94.89.89.57.2.8
rldot1dStpTypeAfterReset
New mode of spaning tree supported by the device after the next reset.
scalarEnumeration.1.3.6.1.4.1.171.10.94.89.89.57.2.9