smScriptSource

DISMAN-SCRIPT-MIB · .1.3.6.1.2.1.64.1.3.1.1.5
Commands MIB view Table view

Object

column r/w SNMPv2-TCDisplayString 
This object either contains a reference to the script
source or an empty string. A reference must be given
in the form of a Uniform Resource Locator (URL) as
defined in RFC 2396. The allowed character sets and the
encoding rules defined in RFC 2396 section 2 apply.
              
When the smScriptAdminStatus object is set to `enabled',
the Script MIB implementation will `pull' the script
source from the URL contained in this object if the URL
is not empty.
              
An empty URL indicates that the script source is loaded
from local storage. The script is read from the smCodeTable
if the value of smScriptStorageType is volatile. Otherwise,
the script is read from non-volatile storage.
              
Note: This document does not mandate implementation of any
specific URL scheme. An attempt to load a script from a
nonsupported URL scheme will cause the smScriptOperStatus
to report an `unknownProtocol' error.
              
Set requests to change this object are invalid if the
value of smScriptOperStatus is `enabled', `editing',
`retrieving' or `compiling' and will result in an
inconsistentValue error.

Context

MIB
DISMAN-SCRIPT-MIB
OID
.1.3.6.1.2.1.64.1.3.1.1.5
Type
column
Access
readwrite
Status
current
Parent
smScriptEntry
Groups
2

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DISMAN-SCRIPT-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DISMAN-SCRIPT-MIB::smScriptSource'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'DISMAN-SCRIPT-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DISMAN-SCRIPT-MIB::smScriptSource.<smScriptOwner>.<smScriptName>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'DISMAN-SCRIPT-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'DISMAN-SCRIPT-MIB::smScriptSource'

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString
Display format
255a
Type Description
Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Type Constraints
range: 0..255

Conformance

Member of
smScriptGroup smScriptGroup2
Compliance refinements
smCompliance readonly
The smScriptSource object is read-only for implementations
that are not able to download script code from a URL.
smCompliance2 readonly
The smScriptSource object is read-only for implementations
that are not able to download script code from a URL.