swL3ospfIfAuthKeyID
DGS3650-SWL3MGMT-MIB ·
.1.3.6.1.4.1.171.11.70.5.3.8.1.20
Object
column
r/w
Integer32
The MD5 key ID.
Context
- MIB
- DGS3650-SWL3MGMT-MIB
- OID
.1.3.6.1.4.1.171.11.70.5.3.8.1.20- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- swL3ospfIfEntry
- Table
- swL3ospfIfTable
- Siblings
- 23
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| swL3ospfIfIpAddress The IP address of this OSPF interface. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.171.11.70.5.3.8.1.1 |
| swL3ospfIfRtrDeadInterval The number of seconds that a router's Hello
packets have not been seen before it's neigh-
bors declare the router down. This should be
some multiple of the Hello inte… | column | OSPF-MIBPositiveInteger | .1.3.6.1.4.1.171.11.70.5.3.8.1.10 |
| swL3ospfIfPollInterval The larger time interval, in seconds, between
the Hello packets sent to an inactive non-
broadcast multi- access neighbor. | column | OSPF-MIBPositiveInteger | .1.3.6.1.4.1.171.11.70.5.3.8.1.11 |
| swL3ospfIfState The OSPF Interface State. | column | Enumeration | .1.3.6.1.4.1.171.11.70.5.3.8.1.12 |
| swL3ospfIfDesignatedRouter The IP Address of the Designated Router. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.171.11.70.5.3.8.1.13 |
| swL3ospfIfBackupDesignatedRouter The IP Address of the Backup Designated
Router. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.171.11.70.5.3.8.1.14 |
| swL3ospfIfEvents The number of times this OSPF interface has
changed its state, or an error has occurred. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.171.11.70.5.3.8.1.15 |
| swL3ospfIfMulticastForwarding The way multicasts should forwarded on this
interface; not forwarded, forwarded as data
link multicasts, or forwarded as data link uni-
casts. Data link multicasting is n… | column | Enumeration | .1.3.6.1.4.1.171.11.70.5.3.8.1.16 |
| swL3ospfIfDemand Indicates whether Demand OSPF procedures (hel-
lo supression to FULL neighbors and setting the
DoNotAge flag on proogated LSAs) should be per-
formed on this interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.11.70.5.3.8.1.17 |
| swL3ospfIfAuthType The authentication type specified for an in-
terface. Additional authentication types may
be assigned locally. | column | Integer32 | .1.3.6.1.4.1.171.11.70.5.3.8.1.18 |
| swL3ospfIfAuthKey The Authentication Key. If the Area's Author-
ization Type is simplePassword, and the key
length is shorter than 8 octets, the agent will
left adjust and zero fill to 8 octet… | column | OctetString | .1.3.6.1.4.1.171.11.70.5.3.8.1.19 |
| swL3ospfAddressLessIf For the purpose of easing the instancing of
addressed and addressless interfaces; This
variable takes the value 0 on interfaces with
IP Addresses, and the correspondi… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.171.11.70.5.3.8.1.2 |
| swL3ospfIfPassiveMode Assign the designated entry to be a passive interface. | column | Enumeration | .1.3.6.1.4.1.171.11.70.5.3.8.1.21 |
| swL3ospfIfMetric The Metric to be advertised. | column | OSPF-MIBMetric | .1.3.6.1.4.1.171.11.70.5.3.8.1.23 |
| swL3ospfIfDistributeListInType The type of route filter for distribute list in. | column | Enumeration | .1.3.6.1.4.1.171.11.70.5.3.8.1.24 |
| swL3ospfIfDistributeListInName The name of route filter for distribute list in. | column | OctetString | .1.3.6.1.4.1.171.11.70.5.3.8.1.25 |
| swL3ospfIfAreaId A 32-bit integer uniquely identifying the area
to which the interface connects. Area ID
0.0.0.0 is used for the OSPF backbone. | column | OSPF-MIBAreaID | .1.3.6.1.4.1.171.11.70.5.3.8.1.3 |
| swL3ospfIfType The OSPF interface type.
By way of a default, this field may be intuited
from the corresponding value of ifType. Broad-
cast LANs, such as Ethernet and IEEE 80… | column | Enumeration | .1.3.6.1.4.1.171.11.70.5.3.8.1.4 |
| swL3ospfIfAdminStat The OSPF interface's administrative status.
The value formed on the interface, and the in-
terface will be advertised as an internal route
to some area. The value 'disabl… | column | OSPF-MIBStatus | .1.3.6.1.4.1.171.11.70.5.3.8.1.5 |
| swL3ospfIfRtrPriority The priority of this interface. Used in
multi-access networks, this field is used in
the designated router election algorithm. The
value 0 signifies that the router is… | column | OSPF-MIBDesignatedRouterPriority | .1.3.6.1.4.1.171.11.70.5.3.8.1.6 |
| swL3ospfIfTransitDelay The estimated number of seconds it takes to
transmit a link state update packet over this
interface. | column | OSPF-MIBUpToMaxAge | .1.3.6.1.4.1.171.11.70.5.3.8.1.7 |
| swL3ospfIfRetransInterval The number of seconds between link-state ad-
vertisement retransmissions, for adjacencies
belonging to this interface. This value is
also used when retransmitting databa… | column | OSPF-MIBUpToMaxAge | .1.3.6.1.4.1.171.11.70.5.3.8.1.8 |
| swL3ospfIfHelloInterval The length of time, in seconds, between the
Hello packets that the router sends on the in-
terface. This value must be the same for all
routers attached to a common network. | column | OSPF-MIBHelloRange | .1.3.6.1.4.1.171.11.70.5.3.8.1.9 |