swDevInfoFrontPanelLedStatus

DGS3426P-L2MGMT-MIB · .1.3.6.1.4.1.171.11.70.7.2.1.1.6
MIB view Table view

Object

scalar OctetString 
This object is a set of system LED indications. The first two 
octets is defined as system LED. The first LED is power LED. The
second LED is console LED. The third LED is RPS (Redundancy 
Power Supply) LED. The fourth LED is Link/ACT/Speed LED. The fifth
LED is POE LED. The other octets following the second
octets are the logical port LED (following dot1dBasePort 
ordering). Every two bytes are presented to a port. The first 
byte is presentd to the Link/Activity LED. The second byte is 
presented to the Speed LED.
            
Link/Activity LED :
 The most significant bit is used for blink/solid:
    8 = The LED blinks.
              
 The second significant bit is used for link status:
 	1 = link fail.
 	2 = link pass.
          
		Speed LED :
 	01 = 10Mbps.
 	02 = 100Mbps.
 	03 = 1000Mbps.
 	04 = 10Gbps.
          
The four remaining bits are currently unused and must be 0.

Context

MIB
DGS3426P-L2MGMT-MIB
OID
.1.3.6.1.4.1.171.11.70.7.2.1.1.6
Type
scalar
Access
readonly
Status
current
Parent
swL2DevInfo
Siblings
5

Syntax

OctetString

Values & Constraints

Object Constraints
range: 0-255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
swDevInfoTotalNumOfPort
The number of ports within this switch. This value is the sum of the ports within this switch.
scalarInteger32.1.3.6.1.4.1.171.11.70.7.2.1.1.1
swDevInfoNumOfPortInUse
The number of ports in this switch connected to the segment or the end stations.
scalarInteger32.1.3.6.1.4.1.171.11.70.7.2.1.1.2
swDevModuleInfoTable
This table contains the module information.
table-.1.3.6.1.4.1.171.11.70.7.2.1.1.3
swDevInfoBootPromVersion
Boot Prom Version.
scalarOctetString.1.3.6.1.4.1.171.11.70.7.2.1.1.4
swDevInfoFirmwareVersion
Firmware Version.
scalarOctetString.1.3.6.1.4.1.171.11.70.7.2.1.1.5