stpBridgeMaxAge
DGS-1210-28XSME-BX ·
.1.3.6.1.4.1.171.10.76.39.1.6.1.5
Object
scalar
r/w
Integer32
The value that all bridges use for MaxAge when this bridge is acting as the root. The granularity of this timer is specified to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
Context
- MIB
- DGS-1210-28XSME-BX
- OID
.1.3.6.1.4.1.171.10.76.39.1.6.1.5- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- stpBridgeGlobal
- Siblings
- 15
Syntax
Integer32
Values & Constraints
Object Constraints
range: 600-4000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| stpModuleStatus The administrative status requested by management for the MST
feature. The value enabled(1) indicates that Mst should be enabled
in the device on all ports. The value disabled… | scalar | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.6.1.1 |
| stpRootCost The Cost of the path to the CIST Root as seen
from this bridge. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.171.10.76.39.1.6.1.10 |
| stpMaxAge The maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value th… | scalar | Timeout | .1.3.6.1.4.1.171.10.76.39.1.6.1.11 |
| stpForwardDelay This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines h… | scalar | Timeout | .1.3.6.1.4.1.171.10.76.39.1.6.1.12 |
| stpRootPort The Port Number of the Port which offers the lowest
path cost from this bridge to the CIST Root Bridge. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.171.10.76.39.1.6.1.13 |
| stpTopologyChangeTrapStatus This object is for enabling or disabling topology change event
trap in the system. | scalar | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.6.1.14 |
| stpNewRootTrapStatus This object is for enabling or disabling new root event
trap in the system. | scalar | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.6.1.15 |
| stpNewRootTraps | node | - | .1.3.6.1.4.1.171.10.76.39.1.6.1.16 |
| stpProtocolVersion The version of Spanning Tree Protocol the bridge is
currently running. The value 'stpCompatible(0)'
indicates the Spanning Tree Protocol specified in
IEEE 802.1D and 'rstp(2)' in… | scalar | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.6.1.2 |
| stpBridgePriority The Value of the writable portion of the Bridge
Identifier comprising of the first two octets.
The values that are set for Bridge Priority must be
in steps of 4096. | scalar | Integer32 | .1.3.6.1.4.1.171.10.76.39.1.6.1.3 |
| stpTxHoldCount The value used by the Port Transmit state machine to limit
the maximum transmission rate. | scalar | Integer32 | .1.3.6.1.4.1.171.10.76.39.1.6.1.4 |
| stpBridgeHelloTime The amount of time between the transmission of
Configuration bridge PDUs by this node in units
of hundredths of a second. | scalar | Integer32 | .1.3.6.1.4.1.171.10.76.39.1.6.1.6 |
| stpBridgeForwardDelay The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D specifies that the range for this
parameter is related to the value of
Br… | scalar | Integer32 | .1.3.6.1.4.1.171.10.76.39.1.6.1.7 |
| stpFowardBPDU This object is for enabling or disabling forward BPDU. | scalar | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.6.1.8 |
| stpRootBridge The bridge identifier of the Root of the common spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the CIST Root Identifier… | scalar | BridgeId | .1.3.6.1.4.1.171.10.76.39.1.6.1.9 |