lldpXdot3PortConfigTLVsTxEnable

The lldpXdot3PortConfigTLVsTxEnable, defined as a bitmap,
includes the IEEE 802.3 organizationally defined set of LLDP
TLVs whose transmission is allowed on the local LLDP agent by
the network management.  Each bit in the bitmap corresponds
to an IEEE 802.3 subtype associated with a specific IEEE
802.3 optional TLV.  The bit 0 is not used since there is
no corresponding subtype.
              
The bit 'macPhyConfigStatus(0)' indicates that LLDP agent
should transmit 'MAC/PHY configuration/status TLV'.
              
The bit 'powerViaMDI(1)' indicates that LLDP agent should
transmit 'Power via MDI TLV'.
              
The bit 'linkAggregation(2)' indicates that LLDP agent should
transmit 'Link Aggregation TLV'.
              
The bit 'maxFrameSize(3)' indicates that LLDP agent should
transmit 'Maximum-frame-size TLV'.
              
The default value for lldpXdot3PortConfigTLVsTxEnable object
is an empty set, which means no enumerated values are set.
              
The value of this object must be restored from non-volatile
storage after a re-initialization of the management system.

MIB

DGS-1210-28XSME-BX

OID

.1.3.6.1.4.1.171.10.76.39.1.32.12.1.1.1.1

Type

column

Access

readwrite

Status

current

Parent

lldpXdot3PortConfigEntry

Table

lldpXdot3PortConfigTable