igsVlanCfgQuerier
DGS-1210-28XSME-BX ·
.1.3.6.1.4.1.171.10.76.39.1.10.3.4.1.4
Object
column
r/w
Enumeration
The snooping switch can be configured as a querier via this object to send out IGMP general queries when IGMP routers are not present in the VLAN. When set to 'enabled', the switch will generate general queries.
Context
- MIB
- DGS-1210-28XSME-BX
- OID
.1.3.6.1.4.1.171.10.76.39.1.10.3.4.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- igsVlanFilterEntry
- Table
- igsVlanFilterTable
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| igsVlanFilterVlanId Index of IgsVlanFilterEntry. This object indicates the VLAN ID for which
the snooping configurations in IgsVlanFilterEntry is to be done. | column | Integer32 | .1.3.6.1.4.1.171.10.76.39.1.10.3.4.1.1 |
| igsVlanQuerierVersionStatus This object allows you to enable/disable
Querier Version function on a specific VLAN. | column | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.10.3.4.1.10 |
| igsVlanDataDrivenLearningAgeOutStatus This object allows you to enable/disable
Data Driven Learning Age Out State on a specific VLAN. | column | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.10.3.4.1.11 |
| igsVlanReportSuppression Enables or disables Report suppression in the system. | column | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.10.3.4.1.12 |
| igsVlanRobustnessValue When the switch receives leave message on a port, it
sends group specific query to check if there are any other
interested receivers for the group. This attribute defines
the ma… | column | Integer32 | .1.3.6.1.4.1.171.10.76.39.1.10.3.4.1.13 |
| igsVlanGrpQueryInterval The value of this attribute defines the time period with which
the switch will send group specific queries on a port to check
if there is any intersted receivers. The switch wil… | column | Integer32 | .1.3.6.1.4.1.171.10.76.39.1.10.3.4.1.14 |
| igsVlanQueryMaxResponseTime The maximum query response time advertised in IGMPv2 general
queries on this interface. | column | Integer32 | .1.3.6.1.4.1.171.10.76.39.1.10.3.4.1.15 |
| igsVlanSnoopStatus This object allows you to enable/disable IGS function on a specific VLAN. | column | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.10.3.4.1.2 |
| igsVlanQuerier Indicates whether the switch is configured as a querier in the VLAN | column | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.10.3.4.1.3 |
| igsVlanQueryInterval This is the interval (in seconds) for which the switch
sends general queries when it is configured as a querier for
the VLAN. A switch should be configured as a querier for a VL… | column | Integer32 | .1.3.6.1.4.1.171.10.76.39.1.10.3.4.1.5 |
| igsVlanRtrPortList List of ports which are configured statically as router ports | column | PortList | .1.3.6.1.4.1.171.10.76.39.1.10.3.4.1.6 |
| igsVlanFbdRtrPortList List of ports which can be configured statically as forbidden router ports. | column | PortList | .1.3.6.1.4.1.171.10.76.39.1.10.3.4.1.7 |
| igsVlanFastLeave Enables or disables fast leave for the VLAN. When it is
'disabled',on reception of a leave message, the switch checks
if they are any interested receivers for the group by sendin… | column | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.10.3.4.1.8 |
| igsVlanDataDrivenLearningStatus This object allows you to enable/disable
Data Driven Learning function on a specific VLAN. | column | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.10.3.4.1.9 |