baudRateConfiguration
DGS-1210-28XSME-BX ·
.1.3.6.1.4.1.171.10.76.39.1.1.21
Object
scalar
r/w
Enumeration
To set SerialPort baud-rate configuration.
Context
- MIB
- DGS-1210-28XSME-BX
- OID
.1.3.6.1.4.1.171.10.76.39.1.1.21- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- companySystem
- Siblings
- 36
Syntax
Enumeration
Values & Constraints
Enumerated Values
9600 | baudrate9600 |
19200 | baudrate19200 |
38400 | baudrate38400 |
115200 | baudrate115200 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sysSwitchName System name used for identification of the device.
The following characters are allowed to input.
0 ~ 9 / a ~ z / A ~ Z
Special character: ( ) V + _ = . | scalar | OctetString | .1.3.6.1.4.1.171.10.76.39.1.1.1 |
| sysSave This object is used to save Configuration , value 1 save config_1 ,
value 2 is not in process , value 3 is save config_1 and value 4 is save config_2. | scalar | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.1.10 |
| sysPowerSavingEnable The Power Saving mode is capable of reducing power consumption automatically
when connected devices are switched off or cable length less than 20meters.
By reducing power consumpt… | scalar | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.1.11 |
| sysJumboFrameEnable Gigabit Web Smart Switches support jumbo frames (frames larger than
the Ethernet frame size of 1522 bytes) of up to 10,000 bytes (tagged).
Default jumbo frame is disabled. | scalar | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.1.12 |
| sysPortCtrlTable A table to control the port specific parameters of the device like speed,
duplex mode, etc. | table | - | .1.3.6.1.4.1.171.10.76.39.1.1.13 |
| sysPortDescriptionTable The port description table. | table | - | .1.3.6.1.4.1.171.10.76.39.1.1.14 |
| sysPortErrTable The port error table. | table | - | .1.3.6.1.4.1.171.10.76.39.1.1.15 |
| sysDhcpAutoConfiguration This object indicates auto config is enabled or disabled. | scalar | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.1.16 |
| sysWebState This object is for Enabled(1) or Disabled(2) Web state in the system. | scalar | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.1.17 |
| sysWebPortNumber Web Server Port Number. | scalar | Integer32 | .1.3.6.1.4.1.171.10.76.39.1.1.18 |
| sysARPAgingTime This object is for ARP aging time. | scalar | Integer32 | .1.3.6.1.4.1.171.10.76.39.1.1.19 |
| sysHardwareVersion Version number of the Hardware. | scalar | OctetString | .1.3.6.1.4.1.171.10.76.39.1.1.2 |
| sysMACAgingTime This object is for MAC aging time. | scalar | Integer32 | .1.3.6.1.4.1.171.10.76.39.1.1.20 |
| autologoutConfiguration To set SerialPort auto-logout-time configuration. | scalar | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.1.22 |
| telnetsettingManagementOnOff Enable/Disable management Telnetsetting mechanism. | scalar | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.1.23 |
| telnetUDPPort The value is for setting telnet's UDP Port. | scalar | Integer32 | .1.3.6.1.4.1.171.10.76.39.1.1.24 |
| autoRefreshConfiguration To set the WEB panel auto refresh timer. | scalar | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.1.25 |
| floodfdbOnOff To set enable status for flood fdb. | scalar | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.1.26 |
| sysContactName To set system contact name. | scalar | OctetString | .1.3.6.1.4.1.171.10.76.39.1.1.27 |
| sysDhcpAutoConfigTimeout To set dhcp auto config timeout. | scalar | Integer32 | .1.3.6.1.4.1.171.10.76.39.1.1.28 |
| sysCommandLogging To set enable status for CommandLogging. | scalar | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.1.29 |
| sysFirmwareVersion Version number of the Firmware. | scalar | OctetString | .1.3.6.1.4.1.171.10.76.39.1.1.3 |
| sysSerialNumber To get the serial number. | scalar | OctetString | .1.3.6.1.4.1.171.10.76.39.1.1.30 |
| sysFirmwareInfomation | node | - | .1.3.6.1.4.1.171.10.76.39.1.1.31 |
| sysDdp | node | - | .1.3.6.1.4.1.171.10.76.39.1.1.32 |
| sysSmartFan | node | - | .1.3.6.1.4.1.171.10.76.39.1.1.33 |
| sysDhcpAutoImage This object indicates auto image is enabled or disabled. | scalar | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.1.34 |
| sysBootupConfigID To get/set bootup config ID. | scalar | Integer32 | .1.3.6.1.4.1.171.10.76.39.1.1.35 |
| sysBootupImage To get/set bootup Image. | scalar | Integer32 | .1.3.6.1.4.1.171.10.76.39.1.1.36 |
| sysPortMediaTypeTable A table to control the port specific parameters of the device like speed,
Vendor name, etc. | table | - | .1.3.6.1.4.1.171.10.76.39.1.1.37 |
| sysLoginTimeoutInterval This time interval is used to count the time and
logout web interface automatically. | scalar | Integer32 | .1.3.6.1.4.1.171.10.76.39.1.1.4 |
| sysLocationName The location name of this node (e.g., `telephone closet,
3rd floor'). If the location is unknown, the value is
the zero-length string. | scalar | OctetString | .1.3.6.1.4.1.171.10.76.39.1.1.5 |
| sysGroupInterval Group Interval is used to send D-link Discover packet to D-link
SmartConsole Utility frequency.
The timer in units of seconds.
Set value 0 to disable group I… | scalar | Integer32 | .1.3.6.1.4.1.171.10.76.39.1.1.6 |
| sysSystemPassword This object is used to set System Password,
The following characters are allowed to input:
semicolon, question mark, space, and double quotation mark. | scalar | OctetString | .1.3.6.1.4.1.171.10.76.39.1.1.7 |
| sysSafeGuardEnable This object is used to set Safeguard Enable\Disable. | scalar | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.1.8 |
| sysRestart This object allows the user to restart the Switch
(i.e)the entire switch will operationally go down and
start again. Setting a value of 'true' causes the switch
to be restarte… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.10.76.39.1.1.9 |