aclL3RuleVlanList
DGS-1210-28XSME-BX ·
.1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.52
Object
column
r/w
OctetString
Specifies the complete set of vlan over which if the packet arrives this filter rule will be applicable. Notice : only support one vlan.
Context
- MIB
- DGS-1210-28XSME-BX
- OID
.1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.52- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- aclL3RuleEntry
- Table
- aclL3RuleTable
- Siblings
- 31
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aclL3RuleAccessID L3 Filter rule ID. 0 means auto assign. | column | Integer32 | .1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.1 |
| aclL3RuleSrcIpAddrMask The IP subnet mask for Source IP address.
This field is read-only and copy from it's Profile setting. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.10 |
| aclL3RuleTcpUdpDstPort The TCP / UDP destination port. The default value is -1,
which means the rule don't care this condition. | column | Integer32 | .1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.11 |
| aclL3RuleTcpUdpSrcPort The TCP / UDP source port. The default value is -1,
which means the rule don't care this condition. | column | Integer32 | .1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.12 |
| aclL3RuleTcpUdpDstPortMask The TCP / UDP Destination port Mask.
This field is read-only and copy from it's Profile setting. | column | OctetString | .1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.13 |
| aclL3RuleTcpUdpSrcPortMask The TCP / UDP Source port Mask.
This field is read-only and copy from it's Profile setting. | column | OctetString | .1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.14 |
| aclL3RuleTcpAckBit The TCP ACK bit to be checked against the packet. The default
value is 'dont_care'(-1), which means the rule don't care this
condition. | column | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.15 |
| aclL3RuleTcpRstBit The TCP RST bit to be checked against the packet. The default
value is 'dont_care'(-1), which means the rule don't care this
condition. | column | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.16 |
| aclL3RuleTcpUrgBit The TCP Urg bit to be checked against the packet. The default
value is 'dont_care'(-1), which means the rule don't care this
condition. | column | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.17 |
| aclL3RuleTcpPshBit The TCP Psh bit to be checked against the packet. The default
value is 'dont_care'(-1). which means the rule don't care this
condition. | column | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.18 |
| aclL3RuleTcpSynBit The TCP Syn bit to be checked against the packet. The default
value is 'dont_care'(-1), which means the rule don't care this condition. | column | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.19 |
| aclL3RuleProfileNo The Profile ID which this rule join. | column | Integer32 | .1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.2 |
| aclL3RuleTcpFinBit The TCP Fin bit to be checked against the packet. The default
value is 'dont_care'(-1), which means the rule don't care this
condition. | column | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.20 |
| aclL3RuleDscp The IP Dscp value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition. | column | Integer32 | .1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.21 |
| aclL3RuleTos The IP Dscp value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition. | column | Integer32 | .1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.22 |
| aclL3RuleIgmpType The IGMP Type to be checked against the packet.A default value is '-1',
which means the rule don't care this condition. | column | Integer32 | .1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.23 |
| aclL3RuleAction Specifies the action to be taken on the packet if the filter
rule matches. | column | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.25 |
| aclL3RuleRateLimit Rate limit for matched packet. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.26 |
| aclL3RuleReplaceDSCP ReplaceDSCP for matched packet. | column | Integer32 | .1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.27 |
| aclL3RuleReplace1P ReplaceDSCP for matched packet. | column | Integer32 | .1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.28 |
| aclL3RuleReplaceQueue Acl L3 Rule Replace Queue. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.29 |
| aclL3RuleProtocol The type of protocol to be checked against the packet. | column | Enumeration | .1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.3 |
| aclL3RuleFilterTimeRange ACL L3 Filter Time Range | column | OctetString | .1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.30 |
| aclL3RuleProtocolMask The IP protocol mask.
This field is read-only and copy from it's Profile setting.
It will work with the other field,aclL3RuleProtocol,
to caculate a range of IP protocol which is… | column | OctetString | .1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.4 |
| aclL3RuleICMPMessageType The message type to be checked against the packet. If the
message type matches with the packet, then the packet will be
dropped / allowed based on the action set in aclL3RuleActio… | column | Integer32 | .1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.5 |
| aclL3RulePortList Specifies the complete set of ports over which if the packet arrives
this filter rule will be applicable. | column | PortList | .1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.51 |
| aclL3RuleICMPMessageCode The message code to be checked against the packet. If the
packet matches with the message code, then the packet will
be dropped / allowed based on the action set in aclL3RuleActio… | column | Integer32 | .1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.6 |
| aclL3RuleDstIpAddr Destination IP address to be matched with the packet.
The default value will be zero, which means the rule
don't care this condition. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.7 |
| aclL3RuleSrcIpAddr Source IP address to be matched with the packet.
The default value will be zero, which means the
rule don't care this condition. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.8 |
| aclL3RuleDstIpAddrMask The IP subnet mask for Destination IP address.
This field is read-only and copy from it's Profile setting. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.9 |
| aclL3RuleStatus This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of th… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.99 |