aclL2RuleAction

DGS-1210-28XSME-BX · .1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.11

MIB view Table view

Object

column r/w Enumeration

Specifies the action to be taken on the packet if the filter
rule matches.
If the action is 'allow', the packet will be forwarded according
to the forwarding rules.
If the action is 'drop', the packet will be discarded.

Context

MIB: DGS-1210-28XSME-BX
OID: .1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.11
Type: column
Access: readwrite
Status: current
Parent: aclL2RuleEntry
Table: aclL2RuleTable
Siblings: 18

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	allow
`2`	drop
`3`	mirror
`4`	rateLimit
`5`	replaceDSCP
`6`	replace1P
`7`	replaceQueue

Related Objects

Sibling Objects

Object	Type	Syntax	OID
aclL2AccessID L2 Filter rule ID. 0 means auto assign.	column	Integer32	`.1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.1`
aclL2RuleRateLimit Rate limit for matched packet.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.12`
aclL2RuleReplaceDSCP Replace DSCP for matched packet.	column	Integer32	`.1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.13`
aclL2RuleReplace1P Replace DSCP for matched packet.	column	Integer32	`.1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.14`
aclL2RuleReplaceQueue ACL L2 Rule Replace Queue.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.15`
aclL2RuleFilterTimeRange ACL L2 Filter Time Range	column	OctetString	`.1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.16`
aclL2RuleVlanIdMask Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will be treated as customer Vlan Id. By Default, the value will be '-1', which means the rule don't care this co…	column	OctetString	`.1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.17`
aclL2ProfileID ACL Profile ID which this rule join.	column	Integer32	`.1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.2`
aclL2RuleEtherType The value in the Type/Len field of a frame that will be matched to trigger this filter. The default value of this object is '-1', which means the rule don't care this condition.	column	Integer32	`.1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.3`
aclL2RuleDstMacAddr Destination MAC address to be matched with the packet. By Default, the Destination Mac Address will be zero,which means the rule don't care this condition.	column	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.4`
aclL2RuleSrcMacAddr Source MAC address to be matched with the packet. By Default, the Source Mac Address will be zero, which means the rule don't care this condition.. address	column	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.5`
aclL2RuleInPortList Specifies the complete set of ports over which this filter is applied for packets ingress at ports in this list.	column	PortList	`.1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.51`
aclL2RuleInVlanList Specifies the complete set of Vlan over which this filter is applied for packets ingress at vlan . Notice : Only support one VLAN.	column	OctetString	`.1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.52`
aclL2RuleVlanId Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will be treated as customer Vlan Id. By Default, the value will be '-1', which means the rule don't care this co…	column	Integer32	`.1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.6`
aclL2Rule1pPriority 802.1p priority to be matched with the packet. By Default, the value will be '-1', which means the rule don't care this condition.	column	Integer32	`.1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.7`
aclL2RuleDstMacAddrMask The MAC address Mask work for Destination MAC address. This field is read-only and copy from it's Profile setting.	column	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.8`
aclL2RuleSrcMacAddrMask The MAC address Mask work for Source MAC address. This field is read-only and copy from it's Profile setting.	column	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.9`
aclL2RuleStatus This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of th…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.99`