secondaryVlanPorts

DGS-1210-28XME-BX · .1.3.6.1.4.1.171.10.76.43.1.124.3.2.1.3
Commands MIB view Table view

Object

column r/w PortList 
If SecondaryVlanType is isolated, the ports in the isolated VLAN of the private VLAN have complete Layer 2 separation from other ports within the same private 
VLAN, except for the promiscuous and trunk ports.
              
If SecondaryVlanType is community, the ports can communicate with other ports 
in the same Secondary VLAN and with promiscuous ports.

Context

MIB
DGS-1210-28XME-BX
OID
.1.3.6.1.4.1.171.10.76.43.1.124.3.2.1.3
Type
column
Access
readwrite
Status
current
Parent
secondaryVlanEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DGS-1210-28XME-BX' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-1210-28XME-BX::secondaryVlanPorts'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'DGS-1210-28XME-BX' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DGS-1210-28XME-BX::secondaryVlanPorts.<privateVlanId>.<secondaryVlanId>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'DGS-1210-28XME-BX' -M '/opt/observium/mibs/d-link:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'DGS-1210-28XME-BX::secondaryVlanPorts'

Syntax

PortList
Source
PortList
Base type
OctetString
Type Description
Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered port, and the least significant bit
represents the highest numbered port.  Thus, each port
of the bridge is represented by a single bit within the
value of this object.  If that bit has a value of '1'
then that port is included in the set of ports; the port
is not included if its bit has a value of '0'.

Values & Constraints

No enumerated values or constraints recorded.