myStpPortBpduGuard
DES7200-RSTP-MSTP-MIB ·
.1.3.6.1.4.1.171.10.97.2.16.2.4.1.7
Object
The BPDU guard feature provides a secure response to invalid configurations because
you must manually put the port back in service. Use the BPDU guard feature in a
service-provider network to prevent an access port from participating in the
spanning tree.
When the port receives a BPDU, it is put in the error-disabled state if you enable
BPDU guard feature of this port.
Context
- MIB
- DES7200-RSTP-MSTP-MIB
- OID
.1.3.6.1.4.1.171.10.97.2.16.2.4.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- myRstpExtPortEntry
- Table
- myRstpExtPortTable
- Siblings
- 7
Syntax
P-BRIDGE-MIBEnabledStatus
- Source
- P-BRIDGE-MIBEnabledStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| myRstpExtPortIfIndex include only physical port and trunk port | column | DES7200-TCIfIndex | .1.3.6.1.4.1.171.10.97.2.16.2.4.1.1 |
| myStpPortProtocolMigration When operating in RSTP (version 2) mode, writing TRUE(1)
to this object forces this port to transmit RSTP BPDUs.
Any other operation on this object has no effect and
it always ret… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.10.97.2.16.2.4.1.2 |
| myStpPortAdminEdgePort The administrative value of the Edge Port parameter. A
value of TRUE(1) indicates that this port should be
assumed as an edge-port and a value of FALSE(2) indicates
that this por… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.10.97.2.16.2.4.1.3 |
| myStpPortOperEdgePort The operational value of the Edge Port parameter. The
object is initialized to the value of
myStpPortAdminEdgePort and is set FALSE on reception of
a BPDU. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.10.97.2.16.2.4.1.4 |
| myStpPortAdminPointToPoint The administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected… | column | Enumeration | .1.3.6.1.4.1.171.10.97.2.16.2.4.1.5 |
| myStpPortOperPointToPoint The operational point-to-point status of the LAN segment
attached to this port. It indicates whether a port is
considered to have a point-to-point connection or not.
The value is… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.10.97.2.16.2.4.1.6 |
| myStpPortBpduFilter It will prevent the port from sending or receiving BPDUs if you enable
BPDU filter feature of this port. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.171.10.97.2.16.2.4.1.8 |