myPimInterfaceCBSRPreference

DES7200-PIM-MIB · .1.3.6.1.4.1.171.10.97.2.27.1.1.2.1.8
MIB view Table view

Object

column r/w Integer32 
The preference value for the local interface as a candidate
bootstrap router.  The value of -1 is used to indicate that
the local interface is not a candidate BSR interface.

Context

MIB
DES7200-PIM-MIB
OID
.1.3.6.1.4.1.171.10.97.2.27.1.1.2.1.8
Type
column
Access
readwrite
Status
current
Parent
myPimInterfaceEntry
Table
myPimInterfaceTable
Siblings
25

Syntax

Integer32

Values & Constraints

Object Constraints
range: -1-255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
myPimInterfaceIfIndex
The ifIndex value of this PIM interface.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.171.10.97.2.27.1.1.2.1.1
myPimInterfaceHelloHoldtime
The value set in the Holdtime field of Hello messages transmitted on this interface. This should be 3.5 times the value of pimInterfaceHelloInterval.
columnseconds Integer32.1.3.6.1.4.1.171.10.97.2.27.1.1.2.1.10
myPimInterfacePropagationDelay
The value inserted into the LAN Prune Delay field of a LAN Prune Delay option on this interface.
columnmilliseconds Integer32.1.3.6.1.4.1.171.10.97.2.27.1.1.2.1.12
myPimInterfaceOverrideInterval
The value inserted into the Override Interval field of a LAN Prune Delay option on this interface.
columnInteger32.1.3.6.1.4.1.171.10.97.2.27.1.1.2.1.13
myPimInterfaceJoinPruneHoldtime
The value inserted into the Holdtime field of a Join/ Prune message sent on this interface. The value should be 3.5 times pimInterfaceJoinPruneInterval.
columnseconds Integer32.1.3.6.1.4.1.171.10.97.2.27.1.1.2.1.15
myPimInterfaceGraftRetryInterval
The interval a PIM router waits for a Graft Ack before resending a Graft on this interface.
columnseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.171.10.97.2.27.1.1.2.1.16
myPimInterfaceMaxGraftRetries
The maximum number of times this router will resend a Graft on this interface.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.171.10.97.2.27.1.1.2.1.17
myPimInterfaceSRTTLThreshold
The Time To Live in a PIM-DM Refresh message at which it is not forwarded on this interface.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.171.10.97.2.27.1.1.2.1.18
myPimInterfaceLanDelayEnabled
Evaluates to TRUE if all routers on this interface are using the LAN Prune Delay Option.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.171.10.97.2.27.1.1.2.1.19
myPimInterfaceAddress
The IP address of the PIM interface.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.171.10.97.2.27.1.1.2.1.2
myPimInterfaceSRCapable
Evaluates to TRUE if all routers on this interface are using the State Refresh Capable Option.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.171.10.97.2.27.1.1.2.1.20
myPimInterfaceDRPriority
The Designater Router Priority inserted into the DR priority option on this interface.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.171.10.97.2.27.1.1.2.1.21
myPimInterfaceNbrCounter
The number of interface's neighbour.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.171.10.97.2.27.1.1.2.1.22
myPimInterfaceBsrBorderEnabled
Enabled means Define a PIM bootstrap message boundary for the PIM domain,use disabled to remove the PIM border.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.171.10.97.2.27.1.1.2.1.23
myPimInterfaceCountIn
Number of packets into the interface since the router has been up.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.171.10.97.2.27.1.1.2.1.24
myPimInterfaceCountOut
Number of packets out of the interface since the router has been up.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.171.10.97.2.27.1.1.2.1.25
myPimInterfaceEnabled
use the ip pim command in interface configuration mode. To disable PIM on the interface, use the no form of this command.
columnP-BRIDGE-MIBEnabledStatus.1.3.6.1.4.1.171.10.97.2.27.1.1.2.1.26
myPimNeighborFilterAcl
The name of the neighbor filter address list,which limits the scope of the neighbor,The default value means all neighbors will be allowed.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.171.10.97.2.27.1.1.2.1.27
myPimDrSupportAddressBound
The name of the DR support address list,which limits the scope of the souce address ,this will be only used when the interface is DR, The default value means all souce address w…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.171.10.97.2.27.1.1.2.1.28
myPimInterfaceNetMask
The network mask for the IP address of the PIM interface.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.171.10.97.2.27.1.1.2.1.3
myPimInterfaceMode
The configured mode of this PIM interface. A value of sparseDense is only valid for PIMv1.
columnEnumeration.1.3.6.1.4.1.171.10.97.2.27.1.1.2.1.4
myPimInterfaceDR
The Designated Router on this PIM interface.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.171.10.97.2.27.1.1.2.1.5
myPimInterfaceHelloInterval
The frequency at which PIM Hello messages are transmitted on this interface.
columnseconds Integer32.1.3.6.1.4.1.171.10.97.2.27.1.1.2.1.6
myPimInterfaceJoinPruneInterval
The frequency at which PIM Join/Prune messages are transmitted on this PIM interface. The default value of this object is the pimJoinPruneInterval.
columnseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.171.10.97.2.27.1.1.2.1.7
myPimInterfaceTrigHelloInterval
The maximum time before a triggered PIM Hello message is transmitted on this interface.
columnseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.171.10.97.2.27.1.1.2.1.9