swL2IGMPQueryState
DES3552P-L2MGMT-MIB ·
.1.3.6.1.4.1.171.11.105.4.2.11.4.1.9
Object
column
r/w
Enumeration
This object decides if the IGMP query is enabled or disabled.
Context
- MIB
- DES3552P-L2MGMT-MIB
- OID
.1.3.6.1.4.1.171.11.105.4.2.11.4.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- swL2IGMPCtrlEntry
- Table
- swL2IGMPCtrlTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Object Constraints
range: 0-32
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| swL2IGMPCtrlVid This object indicates the IGMP control entry's VLAN ID. If the VLAN
is disabled, the VID is always 0 and cannot be changed by management users.
If the VLAN is in Port-Base mode, … | column | Integer32 | .1.3.6.1.4.1.171.11.105.4.2.11.4.1.1 |
| swL2IGMPCurrentState This object indicates the current IGMP query state. | column | Enumeration | .1.3.6.1.4.1.171.11.105.4.2.11.4.1.10 |
| swL2IGMPCtrlState This object indicates the status of this entry.
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from ea… | column | Enumeration | .1.3.6.1.4.1.171.11.105.4.2.11.4.1.11 |
| swL2IGMPFastLeaveState This object indicates the fast_leave status of this entry.
other(1) - this entry is currently in use but the conditions under
which it will remain so are differ… | column | Enumeration | .1.3.6.1.4.1.171.11.105.4.2.11.4.1.12 |
| swL2IGMPQueryInterval The frequency at which IGMP Host-Query packets are
transmitted on this switch. | column | Integer32 | .1.3.6.1.4.1.171.11.105.4.2.11.4.1.2 |
| swL2IGMPMaxResponseTime The maximum query response time on this switch. | column | Integer32 | .1.3.6.1.4.1.171.11.105.4.2.11.4.1.3 |
| swL2IGMPRobustness The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. IGMP is
robust to (R… | column | Integer32 | .1.3.6.1.4.1.171.11.105.4.2.11.4.1.4 |
| swL2IGMPLastMemberQueryInterval The Last Member Query Interval is the Max Response Time
inserted into Group-Specific Queries sent in response to
Leave Group messages, and is also the amount of time between
Group… | column | Integer32 | .1.3.6.1.4.1.171.11.105.4.2.11.4.1.5 |
| swL2IGMPHostTimeout The timer value for sending IGMP query packets when none were
sent by the host on the LAN. The timer works on a per-VLAN basis.
Our device will be activated to send the query me… | column | Integer32 | .1.3.6.1.4.1.171.11.105.4.2.11.4.1.6 |
| swL2IGMPRouteTimeout The Router Timeout is how long a host must wait after hearing
a Query before it may send any IGMPv2 messages. | column | Integer32 | .1.3.6.1.4.1.171.11.105.4.2.11.4.1.7 |
| swL2IGMPLeaveTimer When a querier receives a Leave Group message for a group that
has group members on the reception interface, it sends
Group-Specific Queries every swL2IGMPLeaveTimer to the group … | column | Integer32 | .1.3.6.1.4.1.171.11.105.4.2.11.4.1.8 |