swL3ospfIfAdminStat

DES3200-52P-L3MGMT-MIB · .1.3.6.1.4.1.171.11.113.10.1.3.8.1.5
MIB view Table view

Object

column r/w OSPF-MIBStatus 
The OSPF  interface's  administrative  status.
The  value formed on the interface, and the in-
terface will be advertised as an internal route
to  some  area.   The  value 'disabled' denotes
that the interface is external to OSPF.

Context

MIB
DES3200-52P-L3MGMT-MIB
OID
.1.3.6.1.4.1.171.11.113.10.1.3.8.1.5
Type
column
Access
readwrite
Status
current
Parent
swL3ospfIfEntry
Table
swL3ospfIfTable
Siblings
21

Syntax

OSPF-MIBStatus
Source
OSPF-MIBStatus
Base type
Enumeration

Values & Constraints

Type Values
1enabled
2disabled

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
swL3ospfIfIpAddress
The IP address of this OSPF interface.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.171.11.113.10.1.3.8.1.1
swL3ospfIfRtrDeadInterval
The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello inte…
columnOSPF-MIBPositiveInteger.1.3.6.1.4.1.171.11.113.10.1.3.8.1.10
swL3ospfIfPollInterval
The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor.
columnOSPF-MIBPositiveInteger.1.3.6.1.4.1.171.11.113.10.1.3.8.1.11
swL3ospfIfState
The OSPF Interface State.
columnEnumeration.1.3.6.1.4.1.171.11.113.10.1.3.8.1.12
swL3ospfIfDesignatedRouter
The IP Address of the Designated Router.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.171.11.113.10.1.3.8.1.13
swL3ospfIfBackupDesignatedRouter
The IP Address of the Backup Designated Router.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.171.11.113.10.1.3.8.1.14
swL3ospfIfEvents
The number of times this OSPF interface has changed its state, or an error has occurred.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.171.11.113.10.1.3.8.1.15
swL3ospfIfMulticastForwarding
The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multicasting is n…
columnEnumeration.1.3.6.1.4.1.171.11.113.10.1.3.8.1.16
swL3ospfIfDemand
Indicates whether Demand OSPF procedures (hel- lo supression to FULL neighbors and setting the DoNotAge flag on proogated LSAs) should be per- formed on this interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.171.11.113.10.1.3.8.1.17
swL3ospfIfAuthType
The authentication type specified for an in- terface. Additional authentication types may be assigned locally.
columnInteger32.1.3.6.1.4.1.171.11.113.10.1.3.8.1.18
swL3ospfIfAuthKey
The Authentication Key. If the Area's Author- ization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octet…
columnOctetString.1.3.6.1.4.1.171.11.113.10.1.3.8.1.19
swL3ospfAddressLessIf
For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the correspondi…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.171.11.113.10.1.3.8.1.2
swL3ospfIfAuthKeyID
The MD5 key ID.
columnInteger32.1.3.6.1.4.1.171.11.113.10.1.3.8.1.20
swL3ospfIfPassiveMode
Assign the designated entry to be a passive interface.
columnEnumeration.1.3.6.1.4.1.171.11.113.10.1.3.8.1.21
swL3ospfIfMetric
The Metric to be advertised.
columnOSPF-MIBMetric.1.3.6.1.4.1.171.11.113.10.1.3.8.1.23
swL3ospfIfAreaId
A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.
columnOSPF-MIBAreaID.1.3.6.1.4.1.171.11.113.10.1.3.8.1.3
swL3ospfIfType
The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broad- cast LANs, such as Ethernet and IEEE 80…
columnEnumeration.1.3.6.1.4.1.171.11.113.10.1.3.8.1.4
swL3ospfIfRtrPriority
The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is…
columnOSPF-MIBDesignatedRouterPriority.1.3.6.1.4.1.171.11.113.10.1.3.8.1.6
swL3ospfIfTransitDelay
The estimated number of seconds it takes to transmit a link state update packet over this interface.
columnOSPF-MIBUpToMaxAge.1.3.6.1.4.1.171.11.113.10.1.3.8.1.7
swL3ospfIfRetransInterval
The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting databa…
columnOSPF-MIBUpToMaxAge.1.3.6.1.4.1.171.11.113.10.1.3.8.1.8
swL3ospfIfHelloInterval
The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common network.
columnOSPF-MIBHelloRange.1.3.6.1.4.1.171.11.113.10.1.3.8.1.9