swL2DevInfoFrontPanelLedStatus

This object is a set of system LED indications.
          
When log in system DES3028/DES3052 which do not support POE, the first
two octets is defined as system LED. The first LED is power LED. The
 second LED is console LED. 
           
 When log in system DES3028p/DES3052p which support POE, the first 
 four octets are defined as system LED. The first octet is 0x02 and the
 second octet is 0x01 when in normal mode. Contrarily, the first octet
 is 0x01 and the second octet is 0x02 when in poe mode. The third octet
 indicates the power LED. The fourth octet indicates the console LED.
           
 The other octets are defined as follow:
          
 start on the third or fifth octets separately correspond to system support
 poe or system which does not support poe indicate the logical port LED 
 (following swL2BasePort ordering). Every two bytes are presented to a port. 
 The first byte is presentd to the Link/Activity LED. The second byte is 
 presented to the Speed LED.
          
 Link/Activity LED :
          
 The most significant bit is used for blink/solid:
 8 = The LED blinks.
           
 The second significant bit is used for link status:
          
 1 = link fail.
          
 2 = link pass.
          
 Speed LED :
          
 01 = 10Mbps.
          
 02 = 100Mbps.
          
 03 = 1000Mbps.
          
 The four remaining bits are currently unused and must be 0.

MIB

DES3028G-L2MGMT-MIB

OID

.1.3.6.1.4.1.171.11.63.11.2.1.1.5

Type

scalar

Access

readonly

Status

current

Parent

swL2DevInfo