copyDestFileLocation
DELL-NETWORKING-COPY-CONFIG-MIB ·
.1.3.6.1.4.1.6027.3.5.1.1.1.1.6
Object
column
r/w
DellNetConfigFileLocation
Specifies the location of destination file.
If the copyDestFileType has the value of
dellNetFile(1), it is expected that the copyDestFileType
and copyDestFileName must also be spcified. The three
objects together will uniquely identify the destination file.
If the copyDestFileLocation has the value of
ftp(4) or scp(5), it is expected the login information liked
copyServerAddress, copyUserName, and copyUserPassword
also be spcified.
Context
- MIB
- DELL-NETWORKING-COPY-CONFIG-MIB
- OID
.1.3.6.1.4.1.6027.3.5.1.1.1.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- dellNetCopyEntry
- Table
- dellNetCopyTable
- Siblings
- 16
Syntax
DellNetConfigFileLocation
- Source
- DellNetConfigFileLocation
- Base type
Enumeration
Values & Constraints
Type Values
1 | flash |
2 | slot0 |
3 | tftp |
4 | ftp |
5 | scp |
6 | usbflash |
7 | nfsmount |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| copyConfigIndex To initiate a config copy request, user should
assign a positive random value as an index. | column | Integer32 | .1.3.6.1.4.1.6027.3.5.1.1.1.1.1 |
| copyUserPassword Password used by ftp, scp for copying a
file to an ftp/scp server.
If the copyDestFileLocation has the value of
ftp(4) or scp(5), it is expected the login informa… | column | OctetString | .1.3.6.1.4.1.6027.3.5.1.1.1.1.10 |
| copyState The state of config-copy operation. | column | DellNetConfigCopyState | .1.3.6.1.4.1.6027.3.5.1.1.1.1.11 |
| copyTimeStarted The timetick when the copy started. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.6027.3.5.1.1.1.1.12 |
| copyTimeCompleted The timetick when the copy completed. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.6027.3.5.1.1.1.1.13 |
| copyFailCause The reason a config-copy request failed. | column | DellNetConfigCopyFailCause | .1.3.6.1.4.1.6027.3.5.1.1.1.1.14 |
| copyEntryRowStatus The state of the copy operation.
Uses CreateAndGo when you are performing the copy.
The state is set to active when the copy is completed. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6027.3.5.1.1.1.1.15 |
| copyServerInetAddressType The address type of copyServerInetAddress.
Only ipv4 (1), ipv6 (2) and dns (16) types
are supported. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6027.3.5.1.1.1.1.16 |
| copyServerInetAddress The IP address of the address ftp/tftp/scp server
from or to which to copy the configuration file.
If the copyDestFileLocation has the value of
ftp(4) or scp(5), i… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.6027.3.5.1.1.1.1.17 |
| copySrcFileType Specifies the type of file to copy from.
if the copySrcFileType is runningConfig(2) or
startupConfig(3), the default DellNetConfigFileLocation is
flash(1).
… | column | DellNetConfigFileType | .1.3.6.1.4.1.6027.3.5.1.1.1.1.2 |
| copySrcFileLocation Specifies the location of source file.
If the copySrcFileType has the value of
dellNetFile(1), it is expected that the copySrcFileType
and copySrcFileName must als… | column | DellNetConfigFileLocation | .1.3.6.1.4.1.6027.3.5.1.1.1.1.3 |
| copySrcFileName The file name (including the path, if applicable) of
the file. If copySourceFileType is set to runningConfig or
startupConfig, copySrcFileName is not needed. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.6027.3.5.1.1.1.1.4 |
| copyDestFileType Specifies the type of file to copy to.
if the copyDestFileType is runningConfig(2) or
startupConfig(3), the default dellNetDestFileLocation is
flash(1).
… | column | DellNetConfigFileType | .1.3.6.1.4.1.6027.3.5.1.1.1.1.5 |
| copyDestFileName Specifies the location of destination file.
If the copyDestFileType has the value of
dellNetFile(1), it is expected that the dellNetCopyDestFileTyp
and copyDestFile… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.6027.3.5.1.1.1.1.7 |
| copyServerAddress deprecated The ip address of the tftp server from (or to)
which to copy the configuration file.
Values of 0.0.0.0 or FF.FF.FF.FF for
copyServerAddress are not allowed.
… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6027.3.5.1.1.1.1.8 |
| copyUserName Remote user name for copy via ftp, or scp.
If the copyDestFileLocation has the value of
ftp(4) or scp(5), it is expected the login information liked
copyServerAdd… | column | OctetString | .1.3.6.1.4.1.6027.3.5.1.1.1.1.9 |