copyConfigIndex
DELL-NETWORKING-COPY-CONFIG-MIB ·
.1.3.6.1.4.1.6027.3.5.1.1.1.1.1
Object
column
Integer32
To initiate a config copy request, user should assign a positive random value as an index.
Context
- MIB
- DELL-NETWORKING-COPY-CONFIG-MIB
- OID
.1.3.6.1.4.1.6027.3.5.1.1.1.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- dellNetCopyEntry
- Table
- dellNetCopyTable
- Siblings
- 16
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| copyUserPassword Password used by ftp, scp for copying a
file to an ftp/scp server.
If the copyDestFileLocation has the value of
ftp(4) or scp(5), it is expected the login informa… | column | OctetString | .1.3.6.1.4.1.6027.3.5.1.1.1.1.10 |
| copyState The state of config-copy operation. | column | DellNetConfigCopyState | .1.3.6.1.4.1.6027.3.5.1.1.1.1.11 |
| copyTimeStarted The timetick when the copy started. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.6027.3.5.1.1.1.1.12 |
| copyTimeCompleted The timetick when the copy completed. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.6027.3.5.1.1.1.1.13 |
| copyFailCause The reason a config-copy request failed. | column | DellNetConfigCopyFailCause | .1.3.6.1.4.1.6027.3.5.1.1.1.1.14 |
| copyEntryRowStatus The state of the copy operation.
Uses CreateAndGo when you are performing the copy.
The state is set to active when the copy is completed. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6027.3.5.1.1.1.1.15 |
| copyServerInetAddressType The address type of copyServerInetAddress.
Only ipv4 (1), ipv6 (2) and dns (16) types
are supported. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.6027.3.5.1.1.1.1.16 |
| copyServerInetAddress The IP address of the address ftp/tftp/scp server
from or to which to copy the configuration file.
If the copyDestFileLocation has the value of
ftp(4) or scp(5), i… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.6027.3.5.1.1.1.1.17 |
| copySrcFileType Specifies the type of file to copy from.
if the copySrcFileType is runningConfig(2) or
startupConfig(3), the default DellNetConfigFileLocation is
flash(1).
… | column | DellNetConfigFileType | .1.3.6.1.4.1.6027.3.5.1.1.1.1.2 |
| copySrcFileLocation Specifies the location of source file.
If the copySrcFileType has the value of
dellNetFile(1), it is expected that the copySrcFileType
and copySrcFileName must als… | column | DellNetConfigFileLocation | .1.3.6.1.4.1.6027.3.5.1.1.1.1.3 |
| copySrcFileName The file name (including the path, if applicable) of
the file. If copySourceFileType is set to runningConfig or
startupConfig, copySrcFileName is not needed. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.6027.3.5.1.1.1.1.4 |
| copyDestFileType Specifies the type of file to copy to.
if the copyDestFileType is runningConfig(2) or
startupConfig(3), the default dellNetDestFileLocation is
flash(1).
… | column | DellNetConfigFileType | .1.3.6.1.4.1.6027.3.5.1.1.1.1.5 |
| copyDestFileLocation Specifies the location of destination file.
If the copyDestFileType has the value of
dellNetFile(1), it is expected that the copyDestFileType
and copyDestFileName … | column | DellNetConfigFileLocation | .1.3.6.1.4.1.6027.3.5.1.1.1.1.6 |
| copyDestFileName Specifies the location of destination file.
If the copyDestFileType has the value of
dellNetFile(1), it is expected that the dellNetCopyDestFileTyp
and copyDestFile… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.6027.3.5.1.1.1.1.7 |
| copyServerAddress deprecated The ip address of the tftp server from (or to)
which to copy the configuration file.
Values of 0.0.0.0 or FF.FF.FF.FF for
copyServerAddress are not allowed.
… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6027.3.5.1.1.1.1.8 |
| copyUserName Remote user name for copy via ftp, or scp.
If the copyDestFileLocation has the value of
ftp(4) or scp(5), it is expected the login information liked
copyServerAdd… | column | OctetString | .1.3.6.1.4.1.6027.3.5.1.1.1.1.9 |