ospfPmVirtIfInterfaceName

DC-OSPF-MIB · .1.2.826.0.1.1578918.5.62.1.1.9.1.21
Commands MIB view Table view

Object

column r/w SNMPv2-TCDisplayString 
The textual name of the interface.  The value of this
object should be the name of the interface as assigned by
the local device and should be suitable for use in
commands entered at the device's 'console'.  This might be
a text name, such as 'le0' or a simple port number, such
as '1', depending on the interface naming syntax of the
device.  It should be unique per logical interface.  Set
to null if not known.
              
This field cannot be changed if the row is admin status up
and row status active.

Context

MIB
DC-OSPF-MIB
OID
.1.2.826.0.1.1578918.5.62.1.1.9.1.21
Type
column
Access
readwrite
Status
current
Parent
ospfPmVirtIfEntry
Groups
1

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DC-OSPF-MIB' -M '/opt/observium/mibs/versa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DC-OSPF-MIB::ospfPmVirtIfInterfaceName'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'DC-OSPF-MIB' -M '/opt/observium/mibs/versa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DC-OSPF-MIB::ospfPmVirtIfInterfaceName.<ospfPmVirtIfApplIndex>.<ospfPmVirtIfAreaId>.<ospfPmVirtIfNeighbor>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'DC-OSPF-MIB' -M '/opt/observium/mibs/versa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'DC-OSPF-MIB::ospfPmVirtIfInterfaceName'

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString
Display format
255a
Type Description
Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Type Constraints
range: 0..255

Conformance

Member of
ospfPropVirtIfGroup