bgpPeerAfiSafiReflectorClient

Gives finer control of the configuration provided by
bgpPeerReflectorClient.
              
This value indicates whether the given peer is a reflector
client of this router for this AFI/SAFI, or not.  A value
of nonClient(0) indicates that this peer is not a
reflector client for this AFI/SAFI.  A value of client(1)
indicates that this peer is a reflector client for this
AFI/SAFI that is not fully meshed with other reflector
clients.  A value of meshedClient(2) indicates that the
peer is a reflector client for this AFI/SAFI and is fully
meshed with all other reflector clients.
              
The peer's reflector-client setting for this AFI/SAFI is
chosen as follows.
              
-  If the peer is not a member of a peer group OR the
   peer group is not used.
   o  If bgpPeerReflectorClient is NOT non-client then use
      that
   o  Otherwise use bgpPeerAfiSafiReflectorClient.
              
-  If the peer is a member of a peer group AND the
   peer group is used.
   o  If bgpPeergrReflectorClient is NOT non-client then
      use that.
   o  Otherwise use bgpPeergrAfiSafiReflectorClient.
              
This field can be changed at any time.  However, if the
field is changed while the peer is admin_status UP, the
change will only take effect after the peer has been
cycled admin_status DOWN and then UP, thus forcing the
peer session to be restarted.  In this case, until the
peer is set admin_status DOWN, the peer will be marked as
out of date (as reported by the config_state field in the
AMB_BGP_PEER_STATUS row for the peer).
              
The peer may be configured to ignore this field and
instead obtain the value from a peer-group as explained in
the table description.

MIB

DC-BGP-MIB

OID

.1.2.826.42.1.1578918.5.65.1.3.1.2.1.34

Type

column

Access

readwrite

Status

current

Parent

bgpPeerAfiSafiEntry