dsVdslPortWanOperStatus
DASAN-SWITCH-MIB ·
.1.3.6.1.4.1.6296.9.1.1.2.8.1.62
Object
column
Enumeration
Operational status of WAN port
Context
- MIB
- DASAN-SWITCH-MIB
- OID
.1.3.6.1.4.1.6296.9.1.1.2.8.1.62- Type
- column
- Access
- readonly
- Status
- current
- Parent
- dsVdslPortEntry
- Table
- dsVdslPortTable
- Siblings
- 132
Syntax
Enumeration
Values & Constraints
Enumerated Values
-1 | other |
0 | down |
1 | up |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dsVdslModuleIndex A unique value, greater than zero, for each
module. It is recommended that values are assigned
contiguously starting from 1. The value for each
interface sub-layer must remain c… | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.1 |
| dsVdslPortDownSpeed Downstream speed of port. bits/second. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.10 |
| dsVdslPortErrorCountClear To initialize all error-count-value. | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.106 |
| dsVdslPortCpeErrorCRC . | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.108 |
| dsVdslPortServiceError The raw accumulating dsVdsl service Error count. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.11 |
| dsVdslPortCpePerfLOF . | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.110 |
| dsVdslPortCpePerfLos . | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.111 |
| dsVdslPortCpePerfLol . | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.113 |
| dsVdslPortCpePerfCountClear . | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.114 |
| dsVdslPortSuperFrameRxCount Rx SuperFrame Count. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.115 |
| dsVdslPortSuperFrameTxCount Tx SuperFrame Count. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.116 |
| dsVdslPortSuperFrameCountClear Rx SuperFrame Count Clear. | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.117 |
| dsVdslPortPerfRxCRC Rx CRC Count. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.119 |
| dsVdslPortErrorCRC The raw accumulating dsVdsl CRC Error count. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.12 |
| dsVdslPortPerfTxCRC Tx CRC Count. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.120 |
| dsVdslPortStandard VDSL Standard. | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.121 |
| dsVdslPortLineProfile sym25(1),
asym50-3b(2),
asym50-4b(3),
asym70(4),
asym100(5),
sym100(6),
8a(8),
8b(9),
8c(10),
8d(11),
12a(12),
12b(13),
17a(14),
30a(15),
12a997(16),
12b997(17),
v17a_8k(18) | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.122 |
| dsVdslPortMode normal(1),
isdn(2),
adsl(3),
adsl2(4),
t-lan(5),
adsl-safe(6) | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.123 |
| dsVdslPortProfileSet . | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.124 |
| dsVdslPortUpboEnable . | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.126 |
| dsVdslPortChannel . | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.127 |
| dsVdslPortTCMAdmin . | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.128 |
| dsVdslPortUpSNRMinMargin dsVdsl upstream Min SNR Margin(CO Min SNR Margin). | column | 0.25db Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.129 |
| dsVdslPortErrorSecond The raw accumulating dsVdsl Error Second. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.13 |
| dsVdslPortDownSNRMinMargin dsVdsl downstream Min SNR Margin(CPE Min SNR Margin). | column | 0.25db Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.130 |
| dsVdslPortUpINP dsVdsl upstream INP. | column | unit of 125usec Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.131 |
| dsVdslPortDownINP dsVdsl downstream INP . | column | unit of 125usec Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.132 |
| dsVdslPortMiiInBytes . | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.133 |
| dsVdslPortMiiInBPS . | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.134 |
| dsVdslPortMiiOutBytes . | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.135 |
| dsVdslPortMiiOutBPS . | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.136 |
| dsVdslPortHardwareAddress The Hardware Address of User. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.6296.9.1.1.2.8.1.137 |
| dsVdslPortRedundancySet Redundancy Port Set. | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.138 |
| dsVdslCpeNegoState The Nego mode of CPE Ethernet port. | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.139 |
| dsVdslPortErrorLOF The raw accumulating dsVdsl loss of frame. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.14 |
| dsVdslCpeDuplex The Duplex state of CPE Ethernet port. | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.140 |
| dsVdslPortLinkUpTime LinkUp duration time of port. | column | 1 minute Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.142 |
| dsVdslPortLastRetraingReason . | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.143 |
| dsVdslPortU0BandPBOLength dsVdsl U0 Band Power Back-Off Length.
100m(1)
200m(2)
300m(3)
400m(4)
500m(5)
600m(6)
700m(7)
800m(8)
900m(9)
1000m(10) | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.145 |
| dsVdslPortU1BandPBOLength dsVdsl U1 Band Power Back-Off Length.
100m(1)
200m(2)
300m(3)
400m(4)
500m(5)
600m(6)
700m(7)
800m(8)
900m(9)
1000m(10) | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.146 |
| dsVdslPortU2BandPBOLength dsVdsl U2 Band Power Back-Off Length.
100m(1)
200m(2)
300m(3)
400m(4)
500m(5)
600m(6)
700m(7)
800m(8)
900m(9)
1000m(10) | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.147 |
| dsVdslPortU3BandPBOLength dsVdsl U3 Band Power Back-Off Length.
100m(1)
200m(2)
300m(3)
400m(4)
500m(5)
600m(6)
700m(7)
800m(8)
900m(9)
1000m(10) | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.148 |
| dsVdslPortDownCurrAttainableRate Indicates the maximum currently down attainable data rate
in steps of 1000 bits/second by the Vtu. This value
will be equal to or greater than vdslPhysCurrLineRate.
Note that fo… | column | kbps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.149 |
| dsVdslPortErrorLOS The raw accumulating dsVdsl loss of signal. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.15 |
| dsVdslPortUpCurrAttainableRate Indicates the maximum currently up attainable data rate
in steps of 1000 bits/second by the Vtu. This value
will be equal to or greater than vdslPhysCurrLineRate.
Note that for … | column | kbps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.150 |
| dsVdslPortErrorLPR The raw accumulating dsVdsl loss of power. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.16 |
| dsVdslPortErrorLOL The raw accumulating dsVdsl loss of link. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.17 |
| dsVdslPort15mElapsedTime The current elapsed time from reinitializing point per 15 minutes. | column | 1 minute Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.18 |
| dsVdslPort1dayElapsedTime The current elapsed time from reinitializing point per 1 day. | column | 1 minute Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.19 |
| dsVdslPortIndex A unique value, greater than zero, for each
port. It is recommended that values are assigned
contiguously starting from 1. The value for each
interface sub-layer must remain con… | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.2 |
| dsVdslPortServiceErrorPrev15m The accumulating Serivce-Error count of previous 15 minute. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.20 |
| dsVdslPortServiceErrorCurr15m The accumulating Service-Error count of current 15 minute. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.21 |
| dsVdslPortErrorCRCPrev15m The accumulating CRC-error count of previous 15 minute. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.22 |
| dsVdslPortErrorCRCCurr15m The accumulating CRC-error count of current 15 minute. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.23 |
| dsVdslPortErrorSecondPrev15m The accumulating errored-second count of previous 15 minute. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.24 |
| dsVdslPortErrorSecondCurr15m The accumulating errored-second count of current 15 minute. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.25 |
| dsVdslPortErrorLOFPrev15m The accumulating loss-of-frame count of previous 15 minute. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.26 |
| dsVdslPortErrorLOFCurr15m The accumulating loss-of-frame count of current 15 minute. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.27 |
| dsVdslPortErrorLOSPrev15m The accumulating loss-of-signal count of previous 15 minute. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.28 |
| dsVdslPortErrorLOSCurr15m The accumulating loss-of-signal count of current 15 minute. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.29 |
| dsVdslPortType The type of dsVdsl port. This string defines the type
of port. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.6296.9.1.1.2.8.1.3 |
| dsVdslPortErrorLPRPrev15m The accumulating loss-of-power count of previous 15 minute. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.30 |
| dsVdslPortErrorLPRCurr15m The accumulating loss-of-power count of current 15 minute. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.31 |
| dsVdslPortErrorLOLPrev15m The accumulating loss-of-link count of previous 15 minute. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.32 |
| dsVdslPortErrorLOLCurr15m The accumulating loss-of-link count of current 15 minute. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.33 |
| dsVdslPortServiceErrorPrev1day The accumulating Serivce-Error count of previous 1 day. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.34 |
| dsVdslPortServiceErrorCurr1day The accumulating Service-Error count of current 1 day. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.35 |
| dsVdslPortErrorCRCPrev1day The accumulating CRC-error count of previous 1 day. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.36 |
| dsVdslPortErrorCRCCurr1day The accumulating CRC-error count of current 1 day. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.37 |
| dsVdslPortErrorSecondPrev1day The accumulating errored-second count of previous 1 day. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.38 |
| dsVdslPortErrorSecondCurr1day The accumulating errored-second count of current 1 day. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.39 |
| dsVdslPortIfIndex matching ifIndex oid which is defined in interface mib. | column | ObjectIdentifier | .1.3.6.1.4.1.6296.9.1.1.2.8.1.4 |
| dsVdslPortErrorLOFPrev1day The accumulating loss-of-frame count of previous 1 day. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.40 |
| dsVdslPortErrorLOFCurr1day The accumulating loss-of-frame count of current 1 day. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.41 |
| dsVdslPortErrorLOSPrev1day The accumulating loss-of-signal count of previous 1 day. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.42 |
| dsVdslPortErrorLOSCurr1day The accumulating loss-of-signal count of current 1 day. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.43 |
| dsVdslPortErrorLPRPrev1day The accumulating loss-of-power count of previous 1 day. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.44 |
| dsVdslPortErrorLPRCurr1day The accumulating loss-of-power count of current 1 day. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.45 |
| dsVdslPortErrorLOLPrev1day The accumulating loss-of-link count of previous 1 day. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.46 |
| dsVdslPortErrorLOLCurr1day The accumulating loss-of-link count of current 1 day | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.47 |
| dsVdslPortUpSNR dsVdsl upstream SNR * 1000. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.48 |
| dsVdslPortDownSNR dsVdsl downstream SNR * 1000. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.49 |
| dsVdslPortUpProfile dsVdsl Upstream profile ID.
sym11 (2) Symmetric 11/11
asym11 (1) Asymmetric 3/11
a-sym11 (0) ADSL friendly symmetric 11/11
a-asym11 (3) ADSL friendly asymmetric 3/11
a-s… | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.5 |
| dsVdslPortUpSNRMargin dsVdsl upstream SNR Margin(CO SNR Margin). | column | 0.1db Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.50 |
| dsVdslPortDownSNRMargin dsVdsl downstream SNR Margin(CPE SNR Margin). | column | 0.1db Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.51 |
| dsVdslPortUpAttenuation dsVdsl upstream port attenuation(CO Attenuation). | column | 0.1db Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.52 |
| dsVdslPortDownAttenuation dsVdsl downstream port attenuation(CPE Attenuation). | column | 0.1db Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.53 |
| dsVdslPortOutPower dsVdsl port Output Power. | column | 0.1db Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.54 |
| dsVdslPortWanInPkt dsVdsl WAN in-packet count. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.55 |
| dsVdslPortWanInErr dsVdsl WAN error packet count. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.56 |
| dsVdslPortWanOutPkt dsVdsl WAN out-packet count. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.57 |
| dsVdslPortWanReset Reaquire dsVdsl line SYNC. | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.58 |
| dsVdslPortWanLoopbackAction Perform remote loopback ping test. | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.59 |
| dsVdslPortDownProfile dsVdsl Downstream profile ID.
sym11 (2) Symmetric 11/11
asym11 (1) Asymmetric 3/11
a-sym11 (0) ADSL friendly symmetric 11/11
a-asym11 (3) ADSL friendly asymmetric 3/11
a… | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.6 |
| dsVdslPortWanLoopbackStatus Latest remote loopback test result. | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.60 |
| dsVdslPortWanAdminStatus Administrative status of WAN port | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.61 |
| dsVdslPortVOCLinkStatus PC Ethernet link status through VOC channel. | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.63 |
| dsVdslPortVOCLinkDuplex PC link duplex through VOC channel. | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.64 |
| dsVdslPortVOCLinkSpeed PC link speed through VOC channel. bits/second(bps). | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.65 |
| dsVdslPortOptionband dsVdsl Optional band ID.
Annex B 6-64 (1)
Annex A 6-32 (2)
Annex B 32-64 (3)
Exclude Option Band (4) | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.66 |
| dsVdslPortHamband dsVdsl Amature Radio(HAM) band ID.
The value of Ham band is combination of the following value.
If you want to set band1 and band10, you should set value 257(band1 + band10)
to th… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.67 |
| dsVdslPortUpInterleave dsVdslPort Upstream Interleave delay. | column | 1 ms Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.68 |
| dsVdslPortDownInterleave dsVdslPort Downstream Interleave delay. | column | 1 ms Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.69 |
| dsVdslPortUpPhysicalSpeed Upstream attainable speed of port. bits/second. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.7 |
| dsVdslPortTargetUpSNRMargin dsVdsl Target upstream SNR Margin(CO SNR Margin). | column | 1db Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.70 |
| dsVdslPortTargetDownSNRMargin dsVdsl Target downstream SNR Margin(CPE SNR Margin). | column | 1db Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.71 |
| dsVdslPortPSDMaskLevel dsVdsl PSD Mask Level.
notavailable(-1)
old gains(0)
ANSI M1(1)
ANSI M2(2)
ETSI M1(3)
ETSI M2(4)
ANNEX F 8.5(5)
ANSI M1 EX(6)
ANSI M2 EX(7)
ETSI M1 EX(8)
ETSI M2 EX(9)
ANNEX F 1… | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.72 |
| dsVdslPortPBOLength dsVdsl Power Back-Off Length.
100m(1)
200m(2)
300m(3)
400m(4)
500m(5)
600m(6)
700m(7)
800m(8)
900m(9)
1000m(10) | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.73 |
| dsVdslPort15mElapsedTimeSeconds The current elapsed time from reinitializing point per 15 minutes in seconds. | column | 1 second Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.74 |
| dsVdslPort1dayElapsedTimeSeconds The current elapsed time from reinitializing point per 1 day in seconds. | column | 1 second Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.75 |
| dsVdslPortUpServiceProfile dsVdslPort upstream service profile. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.76 |
| dsVdslPortDownServiceProfile dsVdslPort downstream service profile. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.77 |
| dsVdslPortModemReset Reset the Modem. | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.78 |
| dsVdslPortCPEVersion dsVdslPort CPE NOS informations.
The format of value is 'OS1/OS2/ActiveOS'. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.6296.9.1.1.2.8.1.79 |
| dsVdslPortDownPhysicalSpeed Downstream attainable speed of port. bits/second. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.8 |
| dsVdslPortCPEDownload Download the CPE NOS.
no(0) : No CPE NOS download.
yes(1) : Now downloading.
done(2) : Download completed.
fail(3) : Download fail. | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.80 |
| dsVdslPortLineActiveTimePrev1Day The accumulating Line Active time of previous 1 day. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.81 |
| dsVdslPortLineActiveTimeCurr1Day The accumulating Line Active time of current 1 day. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.82 |
| dsVdslPortLineConfProfileClear To remove the line configure profile assigned to
a physical port for a particular feature. This value
should have 1 that means clear | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.83 |
| dsVdslPortAlarmConfProfileClear To remove the alarm configure profile assigned to
a physical port for a particular feature. This value
should have 1 that means clear | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.84 |
| dsVdslPortEwl Vdsl Port wire length. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.86 |
| dsVdslPortGhsNearEndEwl Vdsl Port Near End wire length. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.87 |
| dsVdslPortGhsFarEndEwl Vdsl Port Far End wire length. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.88 |
| dsVdslPortLineActiveTimeClear To initialize Line Active time. | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.89 |
| dsVdslPortUpSpeed Upstream speed of port. bits/second. | column | Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.8.1.9 |
| dsVdslPortServiceErrorClear To initialize . | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.90 |
| dsVdslPortErrorCRCClear To initialize . | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.91 |
| dsVdslPortErrorSecondClear To initialize Count of ErrorSecond . | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.92 |
| dsVdslPortErrorLOFClear To initialize Count of the number of LOF . | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.93 |
| dsVdslPortErrorLOSClear To initialize Count of the number of LOS . | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.94 |
| dsVdslPortErrorLPRClear To initialize Count of the number of LPR . | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.95 |
| dsVdslPortErrorLOLClear To initialize Count of the number of LOL . | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.8.1.96 |