dsVdslLineConfProfileName
DASAN-SWITCH-MIB ·
.1.3.6.1.4.1.6296.9.1.1.2.25.1.1
Object
column
OctetString
This object identifies a row in this table.
A default profile with an index of 'DEFVAL', will
always exist and its parameters will be set to vendor
specific values, unless otherwise specified in this
document.
Context
- MIB
- DASAN-SWITCH-MIB
- OID
.1.3.6.1.4.1.6296.9.1.1.2.25.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- dsVdslLineConfProfileEntry
- Table
- dsVdslLineConfProfileTable
- Siblings
- 21
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-32
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dsVdslLineConfDownMaxDataRate Specifies the maximum downstream slow channel
data rate in steps of 1000 bits/second.
The maximum aggregate downstream transmit speed
of the line can be derived fro… | column | kbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6296.9.1.1.2.25.1.10 |
| dsVdslLineConfDownMinDataRate Specifies the minimum downstream slow channel
data rate in steps of 1000 bits/second.
The minimum aggregate downstream transmit speed
of the line can be derived fro… | column | kbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6296.9.1.1.2.25.1.11 |
| dsVdslLineConfUpMaxDataRate Specifies the maximum upstream slow channel
data rate in steps of 1000 bits/second. | column | kbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6296.9.1.1.2.25.1.12 |
| dsVdslLineConfUpMinDataRate Specifies the minimum upstream slow channel
data rate in steps of 1000 bits/second. | column | kbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.6296.9.1.1.2.25.1.13 |
| dsVdslLineConfDownMaxInterDelay Specifies the maximum interleave delay for the
downstream slow channel. | column | milliseconds Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.25.1.16 |
| dsVdslLineConfUpMaxInterDelay Specifies the maximum interleave delay for the
upstream slow channel. | column | milliseconds Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.25.1.17 |
| dsVdslLineConfHamband dsVdsl Amature Radio(HAM) band ID.
The value of Ham band is combination of the following value.
If you want to set band1 and band10, you should set value 257(band1 + band10)
to th… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6296.9.1.1.2.25.1.20 |
| dsVdslLineConfDownINP Vdsl downstream INP . | column | unit of 125usec Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.25.1.21 |
| dsVdslLineConfUpINP Vdsl upstream INP. | column | unit of 125usec Integer32 | .1.3.6.1.4.1.6296.9.1.1.2.25.1.22 |
| dsVdslLineConfPBOLength dsVdsl Power Back-Off Length.
100m(1)
200m(2)
300m(3)
400m(4)
500m(5)
600m(6)
700m(7)
800m(8)
900m(9)
1000m(10) | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.25.1.23 |
| dsVdslLineConfPSDMaskLevel dsVdsl PSD Mask Level.
notavailable(-1)
old gains(0)
ANSI M1(1)
ANSI M2(2)
ETSI M1(3)
ETSI M2(4)
ANNEX F 8.5(5)
ANSI M1 EX(6)
ANSI M2 EX(7)
ETSI M1 EX(8)
ETSI M2 EX(9)
ANNEX F 1… | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.25.1.24 |
| dsVdslLineConfTCMAdmin . | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.25.1.25 |
| dsVdslLineConfUpboEnable . | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.25.1.26 |
| dsVdslLineConfChannel . | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.25.1.27 |
| dsVdslLineConfProfRowStatus This object is used to create a new row or modify or
delete an existing row in this table.
A profile activated by setting this object to 'active'.
When 'active' i… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6296.9.1.1.2.25.1.28 |
| dsVdslLineConfDownMaxSnrMgn Specifies the maximum downstream Signal/Noise Margin
in units of 0.25 dB, for a range of 0 to 31.75 dB. | column | 0.25dBm Unsigned32 | .1.3.6.1.4.1.6296.9.1.1.2.25.1.4 |
| dsVdslLineConfDownMinSnrMgn Specifies the minimum downstream Signal/Noise Margin
in units of 0.25 dB, for a range of 0 to 31.75 dB. | column | 0.25dBm Unsigned32 | .1.3.6.1.4.1.6296.9.1.1.2.25.1.5 |
| dsVdslLineConfDownTargetSnrMgn Specifies the target downstream Signal/Noise Margin
in units of 0.25 dB, for a range of 0 to 31.75 dB.
This is the Noise Margin the transceivers must achieve
with a BER of 10^-7 … | column | 0.25dBm Unsigned32 | .1.3.6.1.4.1.6296.9.1.1.2.25.1.6 |
| dsVdslLineConfUpMaxSnrMgn Specifies the maximum upstream Signal/Noise Margin
in units of 0.25 dB, for a range of 0 to 31.75 dB. | column | 0.25dBm Unsigned32 | .1.3.6.1.4.1.6296.9.1.1.2.25.1.7 |
| dsVdslLineConfUpMinSnrMgn Specifies the minimum upstream Signal/Noise Margin
in units of 0.25 dB, for a range of 0 to 31.75 dB. | column | 0.25dBm Unsigned32 | .1.3.6.1.4.1.6296.9.1.1.2.25.1.8 |
| dsVdslLineConfUpTargetSnrMgn Specifies the target upstream Signal/Noise Margin in
units of 0.25 dB, for a range of 0 to 31.75 dB. This
is the Noise Margin the transceivers must achieve with
a BER of 10^-7… | column | 0.25dBm Unsigned32 | .1.3.6.1.4.1.6296.9.1.1.2.25.1.9 |