dsQosRuleIpBasedProtocol
DASAN-QOS-MIB ·
.1.3.6.1.4.1.6296.9.1.1.2.21.1.1.10
Object
The protocol type of rule. It is 1 octet length value. For example, 1 for ICMP, 6 for TCP, 17 for UDP.
Context
- MIB
- DASAN-QOS-MIB
- OID
.1.3.6.1.4.1.6296.9.1.1.2.21.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- dsQosRuleEntry
- Table
- dsQosRuleTable
- Siblings
- 14
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dsQosRuleName A unique string for each rule up to 255 characters.
This string is a index of rule table. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.6296.9.1.1.2.21.1.1.1 |
| dsQosRuleIpBasedTCPorUDPSrcPort The source port of rule. It is 2 octet length value. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.9.1.1.2.21.1.1.11 |
| dsQosRuleIpBasedTCPorUDPDesPort The destination port of rule. It is 2 octet length value. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.9.1.1.2.21.1.1.12 |
| dsQosRuleRowStatus This object is used to create a new row or modify or delete an existing row in this table.
A rule activated by being set this object to 'active'.
When 'active' is set, the syste… | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.21.1.1.13 |
| dsQoSRuleIpBasedPriorityType | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.21.1.1.14 |
| dsQoSRuleIpBasedPriorityValue The Priority value in incoming IP packet.
If PriorityType is 1, this value's range is 0-7.
If PriorityType is 2, this value's range is 0-63.
If PriorityType is 3, this value's ran… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.9.1.1.2.21.1.1.15 |
| dsQosRulePriority The priority of rule.
There are three priority levels, high, medium, low.
It can be used when multi-ruled filetering policy with priority is needed.
For example, If you want to… | column | Enumeration | .1.3.6.1.4.1.6296.9.1.1.2.21.1.1.2 |
| dsQosRuleIngressPort The logical ingress port number of rule. It can be from 0 to 26, 0 means 'any port'. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.9.1.1.2.21.1.1.3 |
| dsQosRuleEgressPort The logical egress port number of rule. It can be from 0 to 26, 0 means 'any port'. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.9.1.1.2.21.1.1.4 |
| dsQosRuleEthertype The ethernet type of rule. It is 2 octet length value.
For example, 0x0800 for IPv4, 0x0806 for ARP. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.9.1.1.2.21.1.1.5 |
| dsQosRuleIpBasedSrcIpAddress The source IP Address of rule. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6296.9.1.1.2.21.1.1.6 |
| dsQosRuleIpBasedSrcNetmask The source netmask of rule. | column | - | .1.3.6.1.4.1.6296.9.1.1.2.21.1.1.7 |
| dsQosRuleIpBasedDesIpAddress The destination IP Address of rule. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6296.9.1.1.2.21.1.1.8 |
| dsQosRuleIpBasedDesNetmask The destination netmask of rule. | column | - | .1.3.6.1.4.1.6296.9.1.1.2.21.1.1.9 |