polL2FilterOutPorts
CTRON-SSR-POLICY-MIB ·
.1.3.6.1.4.1.52.2501.1.16.3.1.9
Object
column
r/w
SSRPortList
The set of ports to which this filter applies on output.
This object may not be modified if the associated.
polL2FilterStatus object is equal to active(1).
Context
- MIB
- CTRON-SSR-POLICY-MIB
- OID
.1.3.6.1.4.1.52.2501.1.16.3.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- polL2FilterEntry
- Table
- polL2FilterTable
- Siblings
- 10
Syntax
SSRPortList
- Source
- SSRPortList
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| polL2FilterIndex A unique index into the table representing a single filter entry. This value
will remain unique and the relationship between the index and the underlying filter
is valid until th… | column | Integer32 | .1.3.6.1.4.1.52.2501.1.16.3.1.1 |
| polL2FilterCreationTime The value of sysUpTime when this filter was made active(1). | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.52.2501.1.16.3.1.10 |
| polL2FilterStatus SMIv2 RowStatus control for this table. Use createAndWait or createAndGo
to create a filter, use destroy to remove an entry or notInService to
disengage a filter without destroyi… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.52.2501.1.16.3.1.11 |
| polL2FilterDesc A string used to describe the filter. It should contain
the creator IP address, and other descriptive information about the filter.
It is recommended that names be unique within a… | column | OctetString | .1.3.6.1.4.1.52.2501.1.16.3.1.2 |
| polL2FilterType The types of filters, as explained below.
static-entry
Based on the restrictions and the presence of
source, destination MAC address they can… | column | Enumeration | .1.3.6.1.4.1.52.2501.1.16.3.1.3 |
| polL2FilterRestrictions The first 3 restrictions, allow, disallow, force apply when the filterType
is static-entry. When polL2FilterType is addressFilter or portAddressLock,
this object does not apply. … | column | Enumeration | .1.3.6.1.4.1.52.2501.1.16.3.1.4 |
| polL2FilterSrcMacAddr The source MAC address, which is present in case
of a Flow, that has been learned by the switch. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.52.2501.1.16.3.1.5 |
| polL2FilterDstMacAddr The destination MAC address which has been learned.
This object may not be modified if the associated.
polL2FilterStatus object is equal to active(1). | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.52.2501.1.16.3.1.6 |
| polL2FilterVlanId The VLAN the destination MAC address belongs to. The default VLAN
is id 1 on SSR.
This object may not be modified if the associated.
polL2FilterStatus object is eq… | column | SSRVlanIndex | .1.3.6.1.4.1.52.2501.1.16.3.1.7 |
| polL2FilterInPorts The set of Ports to which this filter applies on input.
This object may not be modified if the associated.
polL2FilterStatus object is equal to active(1). | column | SSRPortList | .1.3.6.1.4.1.52.2501.1.16.3.1.8 |