ctIGMPVlanQueryMaxResponseTime
CTRON-IGMP-MIB ·
.1.3.6.1.4.1.52.4.1.3.5.1.2.1.6
Object
column
r/w
seconds Integer32
The maximum query response time advertised in IGMPv2 queries on this Vlan.
Context
- MIB
- CTRON-IGMP-MIB
- OID
.1.3.6.1.4.1.52.4.1.3.5.1.2.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- ctIGMPVlanEntry
- Table
- ctIGMPVlanTable
- Siblings
- 10
Syntax
seconds Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ctIGMPVlanId The VlanId value of the Vlan for which IGMP is enabled. | column | Q-BRIDGE-MIBVlanId | .1.3.6.1.4.1.52.4.1.3.5.1.2.1.1 |
| ctIGMPVlanQuerierExpiryTime The number of seconds remaining before the Other Querier
Present Timer expires. If the local system is the querier,
the value of this object is zero. | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.52.4.1.3.5.1.2.1.10 |
| ctIGMPVlanQuerierIP The source IP address used by a switch when acting as IGMP
querier for a Vlan. The value chosen must be in the valid
IP address space for any attached routed interface(s) on
the V… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.52.4.1.3.5.1.2.1.11 |
| ctIGMPVlanQueryInterval The frequency at which IGMP Host-Query packets are
transmitted on this Vlan. | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.52.4.1.3.5.1.2.1.2 |
| ctIGMPVlanStatus The activation of a row enables IGMP on the Vlan. The
destruction of a row disables IGMP on the Vlan. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.52.4.1.3.5.1.2.1.3 |
| ctIGMPVlanVersion The version of IGMP which is running on this Vlan.
This object can be used to configure a switch capable of
either value. For IGMP to function correctly, all
and routers on a Vlan… | column | Enumeration | .1.3.6.1.4.1.52.4.1.3.5.1.2.1.4 |
| ctIGMPVlanQuerier The address of the IGMP Querier on the Vlan to which
this switch is attached. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.52.4.1.3.5.1.2.1.5 |
| ctIGMPVlanRobustness The Robustness Variable allows tuning for the expected
packet loss on a Vlan. If a Vlan is expected to be
lossy, the Robustness Variable may be increased. IGMP is
robust to (Robus… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.52.4.1.3.5.1.2.1.7 |
| ctIGMPVlanLastMembQueryIntvl The Last Member Query Interval is the Max Response Time
inserted into Group-Specific Queries sent in response to
Leave Group messages, and is also the amount of time between
Group… | column | tenths of seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.52.4.1.3.5.1.2.1.8 |
| ctIGMPVlanQuerierUpTime The number of seconds since ctIGMPVlanQuerier was last
changed. | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.52.4.1.3.5.1.2.1.9 |