ctIGMPVlanQuerierExpiryTime

CTRON-IGMP-MIB · .1.3.6.1.4.1.52.4.1.3.5.1.2.1.10

MIB view Table view

Object

column seconds SNMPv2-SMIInteger32

The number of seconds remaining before the Other Querier
Present Timer expires. If the local system is the querier,
the value of this object is zero.

Context

MIB: CTRON-IGMP-MIB
OID: .1.3.6.1.4.1.52.4.1.3.5.1.2.1.10
Type: column
Access: readonly
Status: current
Units: seconds
Parent: ctIGMPVlanEntry
Table: ctIGMPVlanTable
Siblings: 10

Syntax

seconds SNMPv2-SMIInteger32

Source: SNMPv2-SMIInteger32
Base type: Integer32

Values & Constraints

Type Constraints

range: -2147483648..2147483647

Related Objects

Sibling Objects

Object	Type	Syntax	OID
ctIGMPVlanId The VlanId value of the Vlan for which IGMP is enabled.	column	Q-BRIDGE-MIBVlanId	`.1.3.6.1.4.1.52.4.1.3.5.1.2.1.1`
ctIGMPVlanQuerierIP The source IP address used by a switch when acting as IGMP querier for a Vlan. The value chosen must be in the valid IP address space for any attached routed interface(s) on the V…	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.52.4.1.3.5.1.2.1.11`
ctIGMPVlanQueryInterval The frequency at which IGMP Host-Query packets are transmitted on this Vlan.	column	seconds SNMPv2-SMIInteger32	`.1.3.6.1.4.1.52.4.1.3.5.1.2.1.2`
ctIGMPVlanStatus The activation of a row enables IGMP on the Vlan. The destruction of a row disables IGMP on the Vlan.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.52.4.1.3.5.1.2.1.3`
ctIGMPVlanVersion The version of IGMP which is running on this Vlan. This object can be used to configure a switch capable of either value. For IGMP to function correctly, all and routers on a Vlan…	column	Enumeration	`.1.3.6.1.4.1.52.4.1.3.5.1.2.1.4`
ctIGMPVlanQuerier The address of the IGMP Querier on the Vlan to which this switch is attached.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.52.4.1.3.5.1.2.1.5`
ctIGMPVlanQueryMaxResponseTime The maximum query response time advertised in IGMPv2 queries on this Vlan.	column	seconds Integer32	`.1.3.6.1.4.1.52.4.1.3.5.1.2.1.6`
ctIGMPVlanRobustness The Robustness Variable allows tuning for the expected packet loss on a Vlan. If a Vlan is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robus…	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.52.4.1.3.5.1.2.1.7`
ctIGMPVlanLastMembQueryIntvl The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group…	column	tenths of seconds SNMPv2-SMIInteger32	`.1.3.6.1.4.1.52.4.1.3.5.1.2.1.8`
ctIGMPVlanQuerierUpTime The number of seconds since ctIGMPVlanQuerier was last changed.	column	seconds SNMPv2-SMIInteger32	`.1.3.6.1.4.1.52.4.1.3.5.1.2.1.9`