cpqSeCellCLMRequestSize

CPQSTDEQ-MIB · .1.3.6.1.4.1.232.1.2.16.1.1.18
MIB view Table view

Object

column optional Integer32 
The size of requested CLM memory in the cell in kilobytes.

Context

MIB
CPQSTDEQ-MIB
OID
.1.3.6.1.4.1.232.1.2.16.1.1.18
Type
column
Access
readonly
Status
optional
Parent
cpqSeCellEntry
Table
cpqSeCellTable
Siblings
22

Syntax

Integer32
Source
COPS-PR-SPPIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cpqSeCellUnitIndex optional
This is a number that uniquely specifies the cell.
columnInteger32.1.3.6.1.4.1.232.1.2.16.1.1.1
cpqSeCellBoardSpeed optional
This value represents the speed of the cell board/FSB ratio
columnInteger32.1.3.6.1.4.1.232.1.2.16.1.1.10
cpqSeCellPresent optional
This value represents whether there is a cell in the slot
columnTruthValue.1.3.6.1.4.1.232.1.2.16.1.1.11
cpqSeCellHasPower optional
This value represents whether the cell has power
columnTruthValue.1.3.6.1.4.1.232.1.2.16.1.1.12
cpqSeCellReadyForReconfig optional
This value represents whether the cell is ready for reconfiguration
columnTruthValue.1.3.6.1.4.1.232.1.2.16.1.1.13
cpqSeCellTotalMemory optional
This value represents total memory in the cell
columnInteger32.1.3.6.1.4.1.232.1.2.16.1.1.14
cpqSeCellLEDState optional
This value represents state of the cell LED. This is a bit-mapped value defined as follows. Bit 31..30 = 00, LED 3 is Off = 01, LED 3 is On = 10, LED 3 is Bl…
columnInteger32.1.3.6.1.4.1.232.1.2.16.1.1.15
cpqSeCellState optional
This value represents state of the cell
columnInteger32.1.3.6.1.4.1.232.1.2.16.1.1.16
cpqSeCellCLMRequestPercentage optional
The requested percentage of CLM memory to be configured in the cell.
columnInteger32.1.3.6.1.4.1.232.1.2.16.1.1.17
cpqSeCellCLMAllocatedSize optional
The size of allocated CLM memory in the cell in kilobytes.
columnInteger32.1.3.6.1.4.1.232.1.2.16.1.1.19
cpqSeCellCabinetNumber optional
This value represents the cabinet that the cell belongs to.
columnInteger32.1.3.6.1.4.1.232.1.2.16.1.1.2
cpqSeCellInterleaveAllocatedSize optional
The size of allocated interleaved memory in the cell in kilobytes.
columnInteger32.1.3.6.1.4.1.232.1.2.16.1.1.20
cpqSeCellHasInterleaveMem optional
When set indicates that there is an interleaved memory configured in the cell.
columnInteger32.1.3.6.1.4.1.232.1.2.16.1.1.21
cpqSeCellSerialNumber optional
This is the cell board serial number.
columnOctetString.1.3.6.1.4.1.232.1.2.16.1.1.22
cpqSeCellCLMCondition optional
The CLM (Cell Local Memory) settings condition of this cell.
columnEnumeration.1.3.6.1.4.1.232.1.2.16.1.1.23
cpqSeCellCellNumber optional
This value is cell/slot number that is unique across the cabinet.
columnInteger32.1.3.6.1.4.1.232.1.2.16.1.1.3
cpqSeCellIOCTablePtr optional
Table index for the I/O chassis which is connected to this cell.
columnInteger32.1.3.6.1.4.1.232.1.2.16.1.1.4
cpqSeCellPDHCFirmwareRevision optional
HP SAL Revision
columnOctetString.1.3.6.1.4.1.232.1.2.16.1.1.5
cpqSeCellSysFwVersion optional
This is the revision of system firmware on the cell board
columnOctetString.1.3.6.1.4.1.232.1.2.16.1.1.6
cpqSeCellBootInhibited optional
This value indicates whether the cell is active.
columnTruthValue.1.3.6.1.4.1.232.1.2.16.1.1.7
cpqSeCellToScanBusConnectionStatus optional
This bitmap represents the state of cell to scan bus connection/RIO cable state. if bit 6 is set to 1, Cable port swapped. if bit 5 is set to 1, Cable ID mismatched…
columnInteger32.1.3.6.1.4.1.232.1.2.16.1.1.8
cpqSeCellHasCoreIO optional
This value indicates whether the cell has core I/O attached to it.
columnTruthValue.1.3.6.1.4.1.232.1.2.16.1.1.9