cpqFcaLogDrvStatus

Logical Drive Status.
              
The logical drive can be in one of the following states:
              
Ok (2)
  Indicates that the logical drive is in normal operation mode.
              
Failed (3)
  Indicates that more physical drives have failed than the
  fault tolerance mode of the logical drive can handle without
  data loss.
              
Unconfigured (4)
  Indicates that the logical drive is not configured.
              
Recovering (5)
  Indicates that the logical drive is using Interim Recovery Mode.
  In Interim Recovery Mode, at least one physical drive has
  failed, but the logical drive`s fault tolerance mode lets the
  drive continue to operate with no data loss.
              
Ready Rebuild (6)
  Indicates that the logical drive is ready for Automatic Data
  Recovery.  The physical drive that failed has been replaced,
  but the logical drive is still operating in Interim Recovery
  Mode.
              
Rebuilding (7)
  Indicates that the logical drive is currently doing Automatic
  Data Recovery.  During Automatic Data Recovery, fault tolerance
  algorithms restore data to the replacement drive.
              
Wrong Drive (8)
  Indicates that the wrong physical drive was replaced after a
  physical drive failure.
              
Bad Connect (9)
  Indicates that a physical drive is not responding.
              
Overheating (10)
  Indicates that the storage box that contains the logical drive
  is overheating.  The array is still functioning, but
  should be shutdown.
              
Shutdown (11)
  Indicates that the storage box that contains the logical drive
  has overheated.  The logical drive is no longer functioning.
              
Expanding (12)
  Indicates that the logical drive is currently doing Automatic
  Data Expansion.  During Automatic Data Expansion, fault
  tolerance algorithms redistribute logical drive data to the
  newly added physical drive.
              
Not Available (13)
  Indicates that the logical drive is currently unavailable.
  If a logical drive is expanding and the new configuration
  frees additional disk space, this free space can be
  configured into another logical volume.  If this is done,
  the new volume will be set to not available.
              
Queued For Expansion (14)
  Indicates that the logical drive is ready for Automatic Data
  Expansion.  The logical drive is in the queue for expansion.
              
Hard Error (15)
  Indicates that a hard error occurred for this LUN.

MIB

CPQFCA-MIB

OID

.1.3.6.1.4.1.232.16.2.3.1.1.4

Type

column

Access

readonly

Status

mandatory

Parent

cpqFcaLogDrvEntry