coVirtualApUserAccountingProfileIndex
COLUBRIS-VIRTUAL-AP-MIB ·
.1.3.6.1.4.1.8744.5.11.1.1.1.1.10
Object
column
COLUBRIS-TCColubrisProfileIndexOrZero
Identifies the authentication server profile to be used for accounting information. The special value Zero indicates that no accounting profile is selected.
Context
- MIB
- COLUBRIS-VIRTUAL-AP-MIB
- OID
.1.3.6.1.4.1.8744.5.11.1.1.1.1.10- Type
- column
- Access
- readonly
- Status
- current
- Parent
- coVirtualAccessPointConfigEntry
- Table
- coVirtualAccessPointConfigTable
- Siblings
- 14
Syntax
COLUBRIS-TCColubrisProfileIndexOrZero
- Source
- COLUBRIS-TCColubrisProfileIndexOrZero
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| coVirtualApWlanProfileIndex Specifies the index of the VSC profile. | column | Integer32 | .1.3.6.1.4.1.8744.5.11.1.1.1.1.1 |
| coVirtualApDefaultUserRateLimitationEnabled Indicates if the default user rate limitation is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8744.5.11.1.1.1.1.11 |
| coVirtualApDefaultUserMaxTransmitRate Identifies the default user maximum transmit rate. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8744.5.11.1.1.1.1.12 |
| coVirtualApDefaultUserMaxReceiveRate Identifies the default user maximum receive rate. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8744.5.11.1.1.1.1.13 |
| coVirtualApDefaultUserBandwidthLevel Identifies the default user bandwidth level. | column | COLUBRIS-TCColubrisPriorityQueue | .1.3.6.1.4.1.8744.5.11.1.1.1.1.14 |
| coVirtualApOperState Activate/Deactivate the VSC on the radio. | column | Enumeration | .1.3.6.1.4.1.8744.5.11.1.1.1.1.15 |
| coVirtualApSSID Service Set ID assigned to the VSC. This value must be
unique per radio interface. | column | COLUBRIS-TCColubrisSSID | .1.3.6.1.4.1.8744.5.11.1.1.1.1.2 |
| coVirtualApBroadcastSSID Specifies if the SSID is included in beacon frames. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8744.5.11.1.1.1.1.3 |
| coVirtualApMaximumNumberOfUsers Specifies the maximum number of concurrent users that this
profile can accept. | column | Integer32 | .1.3.6.1.4.1.8744.5.11.1.1.1.1.4 |
| coVirtualApDefaultVLAN Specifies the default VLAN to use for this profile
when no RADIUS authentication has taken place.
The value 0 is used when no VLAN has been assigned to this
profile. Writing to t… | column | Integer32 | .1.3.6.1.4.1.8744.5.11.1.1.1.1.5 |
| coVirtualApSecurity Identifies all supported authentication/encryption algorithms. | column | COLUBRIS-TCColubrisSecurity | .1.3.6.1.4.1.8744.5.11.1.1.1.1.6 |
| coVirtualApAuthenMode Identifies if user authentication is performed locally or via
an external authentication server. | column | COLUBRIS-TCColubrisUsersAuthenticationMode | .1.3.6.1.4.1.8744.5.11.1.1.1.1.7 |
| coVirtualApAuthenProfileIndex Specifies the authentication server profile to use for user
authentication.
This parameter only applies when the coVirtualApSecurity
is set to 'wpa' or 'ieee802dot1x' and coVirt… | column | COLUBRIS-TCColubrisProfileIndexOrZero | .1.3.6.1.4.1.8744.5.11.1.1.1.1.8 |
| coVirtualApUserAccountingEnabled Indicates if accounting information is generated by the
device and sent to the authentication server for connected
users. Accounting information will be generated only
if a vali… | column | Enumeration | .1.3.6.1.4.1.8744.5.11.1.1.1.1.9 |