cmm4ExtEthPowerReset

CMM4-MIB · .1.3.6.1.4.1.161.19.3.6.2.6

MIB view Table view

Object

scalar r/w Enumeration

Resets power to external ethernet switch.
(0) Reset Complete.
(1) Reset Switch.

Context

MIB: CMM4-MIB
OID: .1.3.6.1.4.1.161.19.3.6.2.6
Type: scalar
Access: readwrite
Status: current
Parent: cmm4Config
Siblings: 16

Syntax

Enumeration

Values & Constraints

Enumerated Values

`0`	off
`1`	on

Related Objects

Sibling Objects

Object	Type	Syntax	OID
gpsTimingPulse (1) -- Master. (0) -- Slave.	scalar	Enumeration	`.1.3.6.1.4.1.161.19.3.6.2.1`
cmm4IpAccess2 IP Access list entry 2.	scalar	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.161.19.3.6.2.10`
cmm4IpAccess3 IP Access list entry 3.	scalar	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.161.19.3.6.2.11`
cmm4MgmtPortSpeed Management Port Speed Configuration. (1) autoNegotiate - Auto negotiate to best speed and duplex setting. (2) force10Half - Set port to 10 Mbit/s half-duplex. (3) force10Full - Se…	scalar	Enumeration	`.1.3.6.1.4.1.161.19.3.6.2.12`
cmm4NTPServerIp IP address for NTP server for CMM4 GPS Slave.	scalar	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.161.19.3.6.2.13`
sessionTimeout Timer for Telnet, Web and FTP sessions.	scalar	Integer32	`.1.3.6.1.4.1.161.19.3.6.2.14`
vlanEnable To enable or disable VLAN tagging	scalar	Enumeration	`.1.3.6.1.4.1.161.19.3.6.2.15`
managementVID Management VLAN VID	scalar	Integer32	`.1.3.6.1.4.1.161.19.3.6.2.16`
siteInfoViewable Enable non login users the ability to view Site Information	scalar	Enumeration	`.1.3.6.1.4.1.161.19.3.6.2.17`
lan1Ip LAN 1 IP address	scalar	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.161.19.3.6.2.2`
lan1SubnetMask LAN 1 subnet mask.	scalar	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.161.19.3.6.2.3`
defaultGateway Default gateway	scalar	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.161.19.3.6.2.4`
cmm4WebAutoUpdate Web page auto update in seconds. 0 means disabled.	scalar	Seconds Integer32	`.1.3.6.1.4.1.161.19.3.6.2.5`
cmm4PortCfgTable A list of CMM 4 port configuration entries.	table	-	`.1.3.6.1.4.1.161.19.3.6.2.7`
cmm4IpAccessFilter IP Access filtering. (0) Filtering Disabled - All IPs will be allowed access. (1) Filtering Enabled - Only allow IPs in the allowed access list.	scalar	Enumeration	`.1.3.6.1.4.1.161.19.3.6.2.8`
cmm4IpAccess1 IP Access list entry 1.	scalar	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.161.19.3.6.2.9`