cmIpTraceRouteResult

CM-IP-MIB · .1.3.6.1.4.1.2544.1.12.11.3.1.8
MIB view Table view

Object

scalar OctetString 
This object provides the results of a previous TraceRoute Action.

Context

MIB
CM-IP-MIB
OID
.1.3.6.1.4.1.2544.1.12.11.3.1.8
Type
scalar
Access
readonly
Status
current
Parent
cmIpSystemScalars
Siblings
20

Syntax

OctetString

Values & Constraints

Object Constraints
range: 0-1024

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cmIpFlushARPCacheAction
This object allows user to initiate Flush ARP action.
scalarIpActionType.1.3.6.1.4.1.2544.1.12.11.3.1.1
cmIpManagementTrafficBridgingSecurityEnabled
This object allows the user to control the IP Management Traffic Bridging feature's security. When enables, the system supports a secure Management Traffic Bridge.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.11.3.1.10
cmIpv6PingInterface
This object allows user to specify the IPV6 Address related interface.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.2544.1.12.11.3.1.11
cmIpv6PingDestination
This object allows user to specify the IPV6 Address to which ICMP Ping will be initiated.
scalarIPV6-TCIpv6Address.1.3.6.1.4.1.2544.1.12.11.3.1.12
cmIpv6InitiatePingAction
This object allows user to initiate ICMP Ping on cmIpv6PingDestination.
scalarIpActionType.1.3.6.1.4.1.2544.1.12.11.3.1.13
cmIpv6TraceRouteDestination
This object allows user to specify the IPV6 Address to which Trace Route will be initiated.
scalarIPV6-TCIpv6Address.1.3.6.1.4.1.2544.1.12.11.3.1.14
cmIpv6InitiateTraceRouteAction
This object allows user to initiate TraceRoute on cmIpv6TraceRouteDestination.
scalarIpActionType.1.3.6.1.4.1.2544.1.12.11.3.1.15
cmIpv6ProxyNDPEnabled
This object whether enabled proxy NDP.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.11.3.1.16
cmIpv6FwdEnabled
This object whether NE works in router mode or host mode. Forwarding enable:router mode, forwarding disable: host mode.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.11.3.1.17
cmIpFlushNDPCacheAction
This object allows user to initiate Flush NDP action.
scalarIpActionType.1.3.6.1.4.1.2544.1.12.11.3.1.18
cmIpPtpArpRtrvAction
If user want to get PTP arp from cmARPEntry, user need to configure this object first.
scalarPtpArpActionType.1.3.6.1.4.1.2544.1.12.11.3.1.19
cmIpProxyARPEnabled
This object allows user to enable/disable Proxy ARP.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.11.3.1.2
cmIpManagementTrafficDscpEnabled
This object controls whether the DSCP value is modified for the transmitted management traffic whether it is locally generated or routed.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.11.3.1.20
cmIpManagementTrafficDscp
This object specifies the DSCP value and it is applicable when cmIpManagementTrafficDscpEnabled is enabled.
scalarUnsigned32.1.3.6.1.4.1.2544.1.12.11.3.1.21
cmIpPingDestination
This object allows user to specify the IP Address to which ICMP Ping will be initiated.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.2544.1.12.11.3.1.3
cmIpInitiatePingAction
This object allows user to initiate ICMP Ping on cmIpPingDestination.
scalarIpActionType.1.3.6.1.4.1.2544.1.12.11.3.1.4
cmIpPingResult
This object provides the results of a previous ICMP Ping Action.
scalarOctetString.1.3.6.1.4.1.2544.1.12.11.3.1.5
cmIpTraceRouteDestination
This object allows user to specify the IP Address to which Trace Route will be initiated.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.2544.1.12.11.3.1.6
cmIpInitiateTraceRouteAction
This object allows user to initiate TraceRoute on cmIpTraceRouteDestination.
scalarIpActionType.1.3.6.1.4.1.2544.1.12.11.3.1.7
cmIpManagementTrafficBridgingEnabled
This object allows the user to control the IP Management Traffic Bridging feature. When enabled, the system is managed using the IP address specified at the Management LAN port. …
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.11.3.1.9