clabWIFISSIDPolicySNRThreshold
CLAB-WIFI-MIB ·
.1.3.6.1.4.1.4491.2.5.1.1.12.1.7
Object
The SNR parameter indicates the threshold to report SNR. The value -100 indicates no threshold, and events of this type are not generated.
Context
- MIB
- CLAB-WIFI-MIB
- OID
.1.3.6.1.4.1.4491.2.5.1.1.12.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Units
- dB
- Parent
- clabWIFISSIDPolicyEntry
- Table
- clabWIFISSIDPolicyTable
- Siblings
- 13
Syntax
dB SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| clabWIFISSIDPolicyBlockAfterAttempts The BlockAfterAttempts parameter indicates the maximum number
of attempts a client is allowed to attempt registration before
being denied access. Exceeding this value generates … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.5.1.1.12.1.1 |
| clabWIFISSIDPolicyLowPowerDeniedAccessThreshold The LowPowerDeniedAccessThreshold parameter indicates the
power level threshold to deny client association whenever the
station received power is below the threshold. The value … | column | dBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4491.2.5.1.1.12.1.10 |
| clabWIFISSIDPolicyLowPowerDisassociationThreshold The LowerPowerDissasociationThreshold parameter indicates
the threshold to report Disassociation due to low power.
The Wi-Fi GW should refuse associations when the power level
… | column | dBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4491.2.5.1.1.12.1.11 |
| clabWIFISSIDPolicyRowStatus The status of this instance. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4491.2.5.1.1.12.1.12 |
| clabWIFISSIDPolicyBeaconMcsLevelInUse The BeaconMcsLevelInUse parameter specifies the beacon MCS to
be used. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.4491.2.5.1.1.12.1.13 |
| clabWIFISSIDPolicyBeaconMcsLevelsSupported The BeaconMcsLevelsSupported parameter specifies all the beacon MCSs
supported. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.4491.2.5.1.1.12.1.14 |
| clabWIFISSIDPolicyAllocatedBandwidth The AllocatedBandwidth parameter indicates the maximum
bandwidth reserved for a particular interface.
The value zero indicates no limit. | column | Mbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.5.1.1.12.1.2 |
| clabWIFISSIDPolicyAuthenticationFailures The AuthenticationFailures parameter indicates the number of
Authenticationfailures a station simultaneously produces to
generate the event.
Events from same client should not r… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.5.1.1.12.1.3 |
| clabWIFISSIDPolicyNonAuthenticatedTraffic The NonAuthenticatedTraffic parameter represents the number
of non-authenticated messages received from a station to generate
an event. Events from same client should not reoccu… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.5.1.1.12.1.4 |
| clabWIFISSIDPolicyAssociationFailures The AssociationFailures indicates the number of simultaneous
association failures from a station to generate an event.
Events from same client should not reoccur more than once … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.5.1.1.12.1.5 |
| clabWIFISSIDPolicyStatsInterval The StatsInterval parameter indicates the interval value to
collect per-interval statistics.
The value 0 indicates no interval and values reported are
snapshots a… | column | minutes SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4491.2.5.1.1.12.1.6 |
| clabWIFISSIDPolicyANPIThreshold The ANPI parameter indicates the threshold to report the
Average Noise plus Interference. The value -100 indicates no
threshold, and events of this type are not generated. | column | dBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4491.2.5.1.1.12.1.8 |
| clabWIFISSIDPolicyLowReceivedPowerThreshold The LowReceivedPowerThreshold parameter indicates the power
level threshold to generate an event whenever the station
received power is below the threshold. The value -100 indic… | column | dBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4491.2.5.1.1.12.1.9 |